MAS - Editech Services, Inc. - GS07F0449N

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE PRICE LIST

SCHEDULE 736 TEMPORARY ADMINISTRATIVE AND PROFESSIONAL STAFFING (TAPS)

Contract No. GS-07F-0449N CONTRACT PERIOD: April 30, 2018 through April 29, 2023

BUSINESS SIZE: SMALL, WOMEN OWNED

CONTRACTOR INFORMATION:

Editech Services, Inc.

11190 Sunrise Valley Drive, Suite 300 Reston VA 20191 Phone number: (703) 925-9100 Fax number: (703) 925-9396

Contact: Julie A. Willich Julie@editechstafffing.com Website: www.editechstaffing.com E-mail: contact@editechstaffing.com

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create electronic delivery order is available through GSA Advantage! ™, a menu-driven database system. The INTERNET address for GSA Advantage! ™ is: http://www.GSAAdvantage.gov.

CUSTOMER INFORMATION:

1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs)

561320SBSA

1b. LOWEST PRICED MODEL NUMBER AND PRICE FOR EACH SIN: N/A

1c. HOURLY RATES AND DESCRIPTION OF ALL CORRESPONDING COMMERCIAL JOB TITLES, EXPERIENCE, FUNCTIONAL RESPONSIBILITY AND EDUCATION: All hourly rates shown are firm fixed price. See the following price list for hourly rates by location and labor category. See the Job Descriptions provided after the pricing information.

2. MAXIMUM ORDER*: $1,000,000 per SIN

*If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contractor for a better price. The contractor may (1) offer a new price for this requirement (2) offer the lowest price available under this contract or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.

3. MINIMUM ORDER: $5,000 unless the contractor agrees to accept a smaller order amount.

4. GEOGRAPHIC COVERAGE: The preponderance of work location has been identified as:

States: District of Columbia, Maryland, Virginia, Florida, Georgia, South Carolina

Area: District of Columbia Statewide, Maryland Counties of Calvert, Charles, Frederick, Montgomery, Prince George's, St Mary's

Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, King George, Loudoun, Prince William, Stafford Florida Counties of Duval, St. John’s, Nassau, Clay, Flagler, Hillsborough, Miami-Dade, Brevard, Orange, Broward, Escambia, Pinellas, Marion, Manatee Georgia Counties of Cobb, Fulton, Chatham, Chattahoochee, Dougherty South Carolina Counties of Charleston, Berkeley, Spartanburg, Greenville

Wage Determination Number 2015-4282 Rev 17 Dated April 23, 2020

Service in an area with lower SCA rates, resulting in lower wages being paid, will have the bill rates for that task order discounted accordingly from the approved pricing spreadsheet (baseline). Editech Services, Inc. shall never offer bill rates to any customer that have been deemed higher than those included on the approved pricing spreadsheet prior to the request (and subsequent receipt or award) of a modification for the area with the higher pricing.

5. POINT(S) OF PRODUCTION: N/A

6. DISCOUNT FROM LIST PRICES: N/A

7. QUANTITY DISCOUNT(S): N/A

8. PROMPT PAYMENT TERMS: Net 30.

9a. Government Purchase Cards are accepted at or below the micro-purchase threshold.

9b. Government Purchase Cards are accepted above the micro-purchase threshold.

10. FOREIGN ITEMS: None

11a. TIME OF DELIVERY: N/A

11b. EXPEDITED DELIVERY: N/A

11c. OVERNIGHT AND 2-DAY DELIVERY: N/A

11d. URGENT REQUIRMENTS: Agencies can contact the Contractor’s representative for a faster delivery. Customers are encouraged to contact the contractor for accelerated delivery.

12. FOB POINT: N/A

13. ORDERING ADDRESS: Same as contractor address. Customer should contact contractor for additional addresses.

14. PAYMENT ADDRESS: Same as contractor address.

15. WARRANTY PROVISION: None.

16. EXPORT PACKING CHARGES: Not applicable

17. TERMS AND CONDITIONS OF GOVERNMENT PURCHASE CARD ACCEPTANCE: None.

18. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR (IF APPLICABLE): N/A

19. TERMS AND CONDITIONS OF INSTALLATION (IF APPLICABLE): N/A

20a. TERMS AND CONDITIONS OF REPAIR PARTS INDICATING DATE OF PARTS PRICE LISTS AND ANY DISCOUNTS FROM LIST PRICES (IF AVAILABLE): N/A

20b. TERMS AND CONDITIONS FOR ANY OTHER SERVICES (IF APPLICABLE): N/A

21. LIST OF SERVICE AND DISTRIBUTION POINTS (IF APPLICABLE): N/A

22. LIST OF PARTICIPATING DEALERS (IF APPLICABLE): N/A

23. PREVENTIVE MAINTENANCE (IF APPLICABLE): N/A

24a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES (e.g. recycled content, energy efficiency, and/or reduced pollutants): N/A

24b. Section 508 Compliance for EIT: N/A

25. DUNS NUMBER: 188205629

26. NOTIFICATION REGARDING REGISTRATION IN CENTRAL CONTRACTOR REGISTRATION (CCR) DATABASE: Editech Services, Inc. has an Active Registration in the CCR database.

GS-07F-0449N

GSA TAPS 736 SCHEDULE

Labor Category and Pricing

Professional Services

01010 ACCOUNTING CLERK (Occupational Base)

The Accounting Clerk performs one or more accounting tasks such as; posting to registers and ledgers; balancing and reconciling accounts; verifying the internal consistency, completeness, and mathematical accuracy of accounting documents. In addition, tasks include; assigning prescribed accounting distribution codes; examining and verifying the clerical accuracy of various types of reports, lists, calculations, and postings. This position is responsible for preparing journal vouchers; making entries of adjustments to accounts; and working with spreadsheets.

Level I requires a basic knowledge of routine clerical methods, office practices and procedures as they relate to the clerical processing and recording of transactions.

Levels II and III require a knowledge and understanding of the established and standardized bookkeeping and accounting procedures and techniques used in an accounting system, or a segment of an accounting system where there are few variations in the types of transactions handled. In addition, most jobs at each level will require a basic knowledge and understanding of the terminology, codes, and processes used in an automated accounting system.

01013 ACCOUNTING CLERK III

The Accounting Clerk III maintains journals or subsidiary ledgers of an accounting system and balances and reconciles accounts. Typical duties include one or both of the following: 1.) reviewing invoices and statements verifying information, ensuring sufficient funds have been obligated, and if questionable, resolving with the submitting unit determining accounts involved. The review will include coding transactions, and processing material through data processing for application in the accounting system; 2.) analysis and reconciliation of computer printouts with operating unit reports (contacting units, researching causes of discrepancies, and taking action to ensure that accounts balance). Supervisor provides suggestions for handling unusual or non-recurring transactions. Conformance with requirements and technical soundness of completed work are reviewed by the supervisor or are controlled by mechanisms built into the accounting processes.

01020 ADMINISTRATIVE ASSISTANT

In addition to secretarial duties (filing, taking phone calls, scheduling appointments, making travel arrangements), this position will provide administrative support to executive staff with office management responsibilities to include budgeting, personnel records and payroll. The Administrative Assistant may be required to work independently on projects requiring research and preparation of briefing charts and other presentation materials.

13063 MEDIA SPECIALIST III

The Media Specialist III adapts to a variety of nonstandard problems that require extensive specialist assistance (e.g., expiration date on media, media internally labeled incorrectly or frequent introduction of new media technology). In response to media error conditions, this Worker chooses or devises a course of action from among processing tanks and dryer, around polished drum, and onto take-up reel. The specialist turns valves to fill tanks 47 with premixed solutions such as developer, dyes, stop-baths, fixers, bleaches, and washes, moves thermostatic control to keep steam-heated drum at specified temperature, and splices sensitized paper to leaders using tape. The specialist then starts machine and throws switches to synchronize drive speeds of processing and drying units, compares processed prints with color standard, reports variations to control department, adds specified amount of chemicals to renew solutions, and maintains production records.

14070 COMPUTER PROGRAMMER (Occupational Base)

The Computer Programmer performs programming services for establishments or for outside organizations that may contract for services, converts specifications (precise descriptions) about business or scientific problems into a sequence of detailed instructions to solve problems by electronic data processing (EDP) equipment, i.e. digital computers; draws program flow charts to describe the processing of data, and develops the precise steps and processing logic which, when entered into the computer in coded language (COBOL, FORTRAN, or other programming language) to cause the manipulation of data to achieve desired results. The Computer Programmer tests and corrects programs, prepares instructions for operators who control the computer during runs, modifies programs to increase operating efficiency or to respond to changes in work processes, and maintains records to document program development and revisions. At levels I, II and III, Computer Programmers may also perform programming analysis such as: gathering facts from users to define their business or scientific problems, and to investigate the feasibility of solving problems through new or modified computer programs; developing specifications for data inputs, flow, actions, decisions, and outputs; and participating on a continuing basis in the overall program planning along with other EDP personnel and users. In contrast, at level IV, some programming analysis must be performed as part of the programming assignment. The analysis duties are identified in a separate paragraph at levels I, II, III, and IV. However, the systems requirements are defined by systems analysts or scientists.

14071 COMPUTER PROGRAMMER I

The Computer Programmer I assists higher level staff by performing elementary programming tasks which concern limited and simple data items and steps which closely follow patterns of previous work done in the organization, e.g. drawing flow charts, writing operator instructions, or coding and testing routines to accumulate counts, tallies, or summaries. This worker may perform routine programming assignments (as described in Level II) under close supervision. In addition to assisting higher level staff, the Computer Programmer I may perform elementary fact-finding concerning a specified work process, e.g., a file of clerical records which is treated as a unit (invoices, requisitions, or purchase orders, etc.) and then report findings to higher level staff. May receive training in elementary fact-finding. Detailed step-by-step instructions are given for each task, and any deviation must be authorized by a supervisor. Work is closely monitored in progress and reviewed in detail upon completion.

14072 COMPUTER PROGRAMMER II

At this level, initial assignments are designed to develop competence in applying established programming procedures to routine problems. This Computer Programmer performs routine programming assignments that do not require skilled background experience but do require knowledge of established programming procedures and data processing requirements, and works according to clear-cut and complete specifications. The data are refined, and the format of the final product is very similar to that of the input, or is well defined when significantly different, i.e., there are few, if any, problems with interrelating varied records and outputs. The Computer Programmer II maintains and modifies routine programs, makes approved changes by amending program flow charts, developing detailed processing logic, and coding changes, tests and documents modifications and writes operator instructions, may write routine new programs using prescribed specifications, and may confer with EDP personnel to clarify procedures, processing logic, etc. In addition, the Computer Programmer II may evaluate simple interrelationships in the immediate programming area confers with user representatives to gain an understanding of the situation sufficient to formulate the needed change, and implements the change upon approval of the supervisor or higher level staff. The incumbent is provided with charts, narrative descriptions of the functions performed, an approved statement of the product desired (e.g., a change in a local establishment report), and the inputs, outputs, and record formats. This Worker reviews objectives and assignment details with higher level staff to insure thorough understanding; uses judgment in selecting among authorized procedures and seeks assistance when guidelines are inadequate, significant deviations are proposed, or when unanticipated problems arise. Work is usually monitored in progress, and all work is reviewed upon completion for accuracy and compliance with standards.

14073 COMPUTER PROGRAMMER III

As a fully qualified Computer Programmer, this Worker applies standard programming procedures and detailed knowledge of pertinent subject matter in a programming area such as a record keeping operation (supply, personnel and payroll, inventory, purchasing, insurance payments, depositor accounts, etc.); a well-defined statistical or scientific problem; or other standardized operation or problem. The incumbent works according to approved statements of requirements and detailed specifications. While the data are clear cut, related, and equally available, there may be substantial interrelationships of a variety of records and several varied sequences of formats are usually produced. The programs developed or modified typically are linked to several other programs in that the output of one becomes the input for another. This Computer Programmer recognizes probable interactions of other related programs with the assigned program(s) and is familiar with related system software and computer equipment, and solves conventional programming problems, (In small organizations, may maintain programs that concern or combine several operations, i.e. users, or develop programs where there is one primary user and the others give input.)

The Computer Programmer III performs such duties as developing, modifying, and maintaining assigned programs, designing and implementing modifications to the interrelation of files and records within programs in consultations with higher level staff. This Worker monitors the operation of assigned programs and responds to problems by diagnosing and correcting errors in logic and coding; implements and/or maintains assigned portions of a scientific programming project, applying established scientific programming techniques to well-defined mathematical, statistical, engineering, or other scientific problems usually requiring the translation of mathematical notation into processing logic and code. (Scientific programming includes assignments such as: using predetermined physical laws expressed in mathematical terms to relate one set of data to another; the routine storage and retrieval of field test data, and using procedures for real-time command and control, scientific data reduction, signal processing, or similar areas.) This Programmer tests, documents work, writes and maintains operator instructions for assigned programs, and confers with other EDP personnel to obtain or provide factual data.

In addition, this Programmer may carry out fact-finding and programming analysis of a single activity or routine problem, applying established procedures where the nature of the program, feasibility, computer equipment, and programming language have already been decided. Job tasks may require the incumbent to analyze present performance of the program and take action to correct deficiencies based on discussion with the user and consultation with and approval of the supervisor or higher-level staff. This Programmer may assist in the review and analysis of detailed program specifications, and in program design to meet changes in work processes.

The Computer Programmer III works independently under specified objectives; applies judgment in devising program logic and in selecting and adapting standard programming procedures, resolves problems and deviations according to established practices, and obtains advice where precedents are unclear or not available. This Worker, may guide or instruct lower level programmers; supervise technicians and others who assist in specific assignments, works on complex programs under close direction of higher level staff or supervisor, and may assist higher level staff by independently performing moderately complex tasks assigned, and performing complex tasks under close supervision. Work at a level above this is deemed Supervisory or Individual Contributor. Completed work is reviewed for conformance to standards, timeliness, and efficiency.

14074 COMPUTER PROGRAMMER IV

The Computer Programmer IV applies expertise in programming procedures to complex programs; recommends the redesign of programs, investigates and analyzes feasibility and program requirements, and develops programming specifications. Assigned programs typically affect a broad multi-user computer system which meets the data processing needs of a broad area (e.g., manufacturing, logistics planning, finance management, human resources, or material management) or a computer system for a project in engineering, research, accounting, statistics, etc. This Programmer plans the full range of programming actions to produce several interrelated but different products from numerous and diverse data elements, which are usually from different sources; solves difficult programming problems, and uses knowledge of pertinent system software, computer equipment, work processes, regulations, and management practices. This Programmer performs such duties as: developing, modifying, and maintains complex programs; designs and implements the interrelations of files and records within programs which will effectively fit into the overall design of the project; works with problems or concepts and develops programs for the solution to major scientific computational problems requiring the analysis and development of logical or mathematical descriptions of functions to be programmed; and develops occasional special programs, e.g. a critical path analysis program to assist in managing a special project. This Worker tests, documents, and writes operating instructions for all work, confers with other EDP personnel to secure information, investigate and resolve problems, and coordinates work efforts. In addition, this incumbent performs such programming analyses as: investigating the feasibility of alternate program design approaches to determine the best balanced solution, e.g., one that will best satisfy immediate user needs, facilitate subsequent modification, and conserve resources. Duties include the following: assisting user personnel in defining problems or needs, determining work organization on typical maintenance projects and smaller scale, working on limited new projects, the necessary files and records, and their interrelation with the program or working on large or more complicated projects, and participating as a team member along with other EDP personnel and users, holding responsibility for a portion of the project.

The Computer Programmer IV works independently under overall objectives and direction, apprising the supervisor about progress and unusual complications and modifying and adapting precedent solutions and proven approaches. Guidelines include constraints imposed by the related programs with which the incumbent's programs must be meshed. Completed work is reviewed for timeliness, compatibility with other work, and effectiveness in meeting requirements. This Worker may function as team leader or supervise a few lower level programmers or technicians on assigned work.

14160 PERSONAL COMPUTER SUPPORT TECHNICIAN

The Personal Computer Support Technician provides support to distributed PC/networking environment including installation, testing, repair, and troubleshooting for stand-alone PCs, PCs linked to networks, printers, and other computer peripherals. Support responsibilities include software installation, and configurations. This technician performs technical, operational, and training support to users of personal computers either by telephone, or on-site for PC desktop hardware and software packages. Job duties require the technician to install and test personal computers, printers, and other peripherals, configure operating system, load shrink-wrap programs and other application software programs. In this position, the incumbent troubleshoots computer problems, performs hardware and software diagnostics, coordinates needed repairs, resolves computer system problems, including coordination between users and components of a local area network, and participates in the evaluation of system configuration and software.

15080 GRAPHIC ARTIST

The Graphic Artist works with the courseware production team to design and develop graphic/visual effects used in courseware material. This position requires the use of specialized computer software to develop high quality computer illustrations, technical drawings, and animations supporting various media used within the training curriculum. The Graphic Artist is capable of using specialized hardware and/or software for video/audio capture and editing of multimedia presentations, incorporates principles of layout design throughout the courseware production process, and is responsible for quality control, review and revision of all aspects of graphics development.

30360 PARALEGAL/LEGAL ASSISTANT (Occupational Base) The Paralegal/Legal Assistant performs a variety of legal assistance duties in an office providing legal assistance to attorneys or litigation teams. The Paralegal Assistant analyzes the legal impact of legislative developments and administrative and judicial decisions, opinions, determinations, and rulings, conducts research for the preparation of legal opinions on matters of interest; performs substantive legal analysis of requests for information under the provisions of various acts; or other similar legal support functions which require discretion and independent judgment in the application of specialized knowledge of laws, precedent decisions, regulations, agency policies, and judicial or administrative proceedings. Such knowledge is less than that represented by graduation from a recognized law school and may have been gained from formalized, professionally instructed agency, educational institution training, or from professionally supervised on-the-job training. While the paramount knowledge requirements of this occupational class are legal, some positions may also require a practical knowledge of subject matter areas related to the agency's substantive programs.

30364 PARALEGAL/LEGAL ASSISTANT IV

At this level, the Paralegal/Legal Assistant IV assists in the evaluation, development, and litigation of cases. In this capacity, the incumbent performs the following duties:

a. Examines and evaluates information in case files, for case litigation worthiness and appropriate titles of law;

b. Determines the need for additional information, independent surveys, evidence, and witnesses, and plans a comprehensive approach to obtain this information;

c. Through on-site visits, interviews, and review of records on operations, looks for and evaluates the relevance and worth of evidence;

d. Selects, summarizes, and compiles comparative data to examine and evaluate respondent's deficiencies in order to provide evidence of illegal practices or patterns;

e. Reviews economic trends and forecasts at the national and regional level to evaluate the impact of successful prosecution and potential remedial provisions of ongoing investigations and litigation;

f. Identifies types of record keeping systems and types of records maintained which would be relevant. Gathers, sorts, and interprets data from various record systems including computer information systems;

g. Interviews potential witnesses for information and prepares witnesses for court appearances;

h. Develops statistics and tabulations, such as standard deviations, regression analyses, and weighting, to provide leads and supportive data for case litigation. Prepares charts, graphs, and tables to illustrate results;

i. Analyzes data, develops recommendations and justifications for the attorney(s) who will take the matter to court. Continues to work with the attorney(s) during the progress of the case, obtaining and developing further evidence and exhibits, providing administrative assistance, and maintaining custody of exhibits, documents, and files;

j. May appear in court as a witness to testify concerning exhibits prepared supporting plaintiff's case

30461 TECHNICAL WRITER I

The Technical Writer I revises or writes standardized material for reports, manuals, briefs, proposals, instruction books, catalogs, and related technical and administrative publications concerned with work methods and procedures, and installation, operation, and maintenance of machinery and other equipment. This worker receives technical direction from supervisor or senior writer, notes or manuals containing operating procedures and details manufacturer's catalogs, drawings and other data relative to operation, maintenance, and service of equipment. This writer may have access to blueprints, sketches, drawings, parts lists, specifications, mockups, and product samples to integrate and delineate technology, operating procedure, and production sequence and detail. This worker organizes material and completes writing assignment according to set standards regarding order, clarity, conciseness, style, and terminology, may maintain records and files of work and revisions, select photographs, drawings, sketches, diagrams, and charts to illustrate material, assist in laying out material for publication arrange for typing, duplication and distribution of material; may assist in writing speeches, articles, and public or employee relations releases, and may specialize in writing material regarding work methods and procedures.

30462 TECHNICAL WRITER II

In this capacity, the Technical Writer revises or writes material that is mostly standardized for reports, manuals, briefs, proposals, instruction books, catalogs, and related technical and administrative publications concerned with work methods and procedures, and installation, operation, and maintenance of machinery and other equipment. The incumbent receives assignment and technical information from a supervisor or senior writer, may be provided notes or manuals containing operating procedures and details, and may observe production, developmental or experimental activities to expand or verify the provided operating procedures and details. This worker accesses manufacturers' catalogs, drawings and other data relative to operation, maintenance, and service of equipment, may have access to blueprints, sketches, drawings, parts lists, specifications, mockups, and product samples to integrate and delineate technology, operating procedure, and production sequence and detail. This writer organizes material and completes writing assignment according to set standards regarding order, clarity, conciseness, style, and terminology, may maintain records and files of work and revisions, may select photographs, drawings, sketches, diagrams, and charts to illustrate material, assist in laying out material for publication, and arrange for typing, duplication and distribution of material. This writer may draft speeches, articles, and public or employee relations releases, or specialize in writing material regarding work methods and procedures.

30463 TECHNICAL WRITER III

The Technical Writer III develops, writes, and edits material for reports, manuals, briefs, proposals, instruction books, catalogs, and related technical and administrative publications concerned with work methods and procedures, and installation, operation, and maintenance of machinery and other equipment, receives assignment from supervisor, observes production, developmental, and experimental activities to determine operating procedure and detail. This writer interviews production and engineering personnel and reads journals, reports, and other material to become familiar with product technologies and production methods, and reviews manufacturer's and trade catalogs, drawings and other data relative to operation, maintenance, and service of equipment. The Technical Writer III studies blueprints, sketches, drawings, parts lists, specifications, mockups, and product samples to integrate and delineate technology, operating procedure, and production sequence and detail, organizes material and completes writing assignment according to set standards regarding order, clarity, conciseness, style, and terminology; and reviews published materials and recommends revisions or changes in scope, format, content, and methods of reproduction and binding. This worker may perform the following tasks: maintain records and files of work and revisions, select photographs, drawings, sketches, diagrams, and charts to illustrate material; assist in laying out material for publication, arrange for typing, duplication and distribution of material, write speeches, articles, and public or employee relations releases, edit, standardize, or make changes to material prepared by other writers or plant personnel. This incumbent may specialize in writing material regarding work methods and procedures.

STATISTICIAN

The Statistician will serve a critical role in the business operations and in delivering high-quality solutions, working closely with other members of the team to construct statistical analyses and visualizations, help build and analyze models, and communicate with customers to become more productive in its overall growth strategy. They will work to clearly understand business needs and translate those needs into analysis questions. They will develop end-to-end solutions with the help of other team members and implement those solutions as customer deliverables. Work directly with customers to effectively communicate the solution progress and timelines and guarantee solution efficacy. Be able to monitor model performance long-term and develop enhancements as needed. A minimum of a bachelor’s degree is required, preferably in a Quantitative Field (Statistics Preferred). A minimum of 2 years’ experience in statistical analysis is also required. Experience with a statistical programming language.

BUILDING INFORMATION MODELING SPECIALIST

The Building Information Modeling Specialist will deliver an automation solution within the Revit application. This person must have at least five years of experience in Autodesk tools and must have experience using Dynamo to automate processes in Revit specifically working with conduit.

SOFTWARE ARCHITECT

The Software Architect delivers cutting edge technology offerings, creative custom problem solving, and rapid delivery to meet customer needs. Works with other members of the team to clearly understand business needs and translate those needs into development solutions. Develops end-to-end solutions with the help of other team members and implement those solutions as customer deliverables. Works directly with customers to effectively communicate the solution progress and timelines and guarantee solution efficacy. Monitors solution performance long-term and develop enhancements as needed.

This resource must have a minimum of a Bachelors degree, preferably in Computer Science, or other relevant field, as well as a minimum of 5 years’ experience in software development and experience with a wide variety of Data Management Systems preferred.

MARKETING ASSISTANT

The Marketing Assistant is responsible for helping and directing marketing projects from concept to implementation across a broad spectrum of marketing channels. They will work with other team members to roll out marketing projects and will report to the executive management team to communicate progress on timelines, budgets and performance. This role will assist with developing the company’s marketing strategy with senior management. They will work with other marketing professionals to coordinate producing marketing communications across a variety of marketing channels. They must be flexible to commute for marketing events.

Required skills include:

a) Highly organized, detail-oriented, and time management capabilities

b) Exceptional written and verbal communication skills

c) Contributes to a professional team by taking part in meetings with staff and executives

d) Participation and organizing community events and projects

e) Current or pending college degree image1.png