PSS - Stantec Consulting Services Inc. - GS00F0054M

GSA Federal Supply Service

CONTRACTOR INFORMATION

209 Commerce Parkway PO Box 128

Cottage Grove, WI 53527 Main:(608) 839-1995

Vice President

CUSTOMER INFORMATION

Chicago IL 60693

Section A – How to Use This Schedule How to Use This Schedule

Using this schedule and putting a Task Order in place is quick and efficient. It entails the five-step process described below:

Step 1: Buyer Identifies Requirement

The Technical Buyer identifies a requirement, prepares a Scope of Work (SOW), and sends it to a Contracting Officer. Typically, the SOW will identify discrete tasks, deliverables, and a schedule.

Step 2a: For Task Orders Under $3,000

Place the Task Order directly with the schedule holder of your choice.

Step 2b: For Task Orders Over $3,000 The Technical Buyer and Contracting Officer work together to prepare a Request for Quote (RFQ). In addition to the SOW, the RFQ describes the basis for selection and may include specific evaluation criteria. The RFQ may ask for a technical approach, staffing plan, rates, and information about the schedule holder’s experience. The RFQ should be sent to three approved GSA Environmental Advisory Services schedule holders. GSA encourages Federal agencies to keep the burden on schedule holders to a minimum by holding oral interviews rather than requesting lengthy written responses to RFQs.

Step 3: The Contractor Submits a Response

At a minimum, this will consist of a staffing plan, identifying the pertinent service area and professional levels and disciplines of staff within those service areas, together with the appropriate labor rates and other direct costs. If requested by the buyer, the response may also include a technical approach and description of qualifications.

Step 4: Evaluate Responses/Select Contractor

The Technical Buyer and Contracting Officer will collaborate on the evaluation of the responses received. Selection should be made on a Best Value basis.

Step 5: Place Task Order with Selected Contractor

After selecting the Best Value contractor, the final step is to place the Task Order directly with that Contractor. The buyer does not have to transfer any funds to GSA, and the buyer manages the Task Order without participation by GSA.

Section B – Table of Awarded Special Item Numbers (SINs)

Contract Number GS-00F-0054M

· Analysis of mission, program goals, and objectives

· Requirements analysis

· Organizational performance assessment

· Special studies and analysis

· Training, privatization and outsourcing

SIN 871.2 Concept Development and Requirements Analysis. Services involve abstract or concept studies and analysis, requirements definition, preliminary planning, the evaluation of alternative technical approaches and associated costs for the development or enhancement of high level general performance specifications of a system, project, mission or activity. Typical associated tasks include, but are not limited to:

· Requirements analysis

· Cost/cost-performance trade-off analysis

· Feasibility analysis

· Regulatory compliance support

· Technology conceptual designs

SIN 871.3 System Design, Engineering and Integration. Services involve the translation of a system (or subsystem, program, project, activity) concept into a preliminary and detailed design (engineering plans and specifications), performing risk identification / analysis / mitigation, traceability, and then integrating the various components to produce a working prototype or model of the system. Typical associated tasks include, but are not limited to:

· Computer-aided design

· Design studies and analysis

· High level detailed specification preparation

· Configuration management and document control

· Fabrication, assembly and simulation

· Modeling

00CORP

(continued) SIN 871.4 Test and Evaluation. Services required under this SIN involve the application of various techniques demonstrating that a prototype system (subsystem, program, project or activity) performs in accordance with the objectives outlined in the original design. Typical associated tasks include, but are not limited to:

· Testing of a prototype and first article (s) testing

· Environmental testing

· Independent verification and validation

· Reverse engineering

· Simulation and modeling (to test the feasibility of a concept)

· System safety

· Quality assurance

· Physical testing of the product or system

· Training, privatization and outsourcing

00CORP

(continued) SIN 899 1 – Environmental Services

Services include, but are not limited to:

· Environmental planning services & documentation (e.g., environmental assessments, environmental impact statements, natural resource management plans, studies and consultations, cultural resource management plans, studies and consultations and waste management plans)

· Environmental compliance services (e.g., environmental compliance audits, compliance management planning, waste and pollution prevention surveys,)

· Environmental occupational training services; waste management services (e.g., hazard and exposure assessments, waste characterization studies, review and recommendation of waste tracking or handling systems, waste management planning, review of technologies and processes impacting waste management, and the management and operation of recycling programs.)

· Hazardous material management software; and remote advisory services (e.g., telephone assistance with hazardous material spills, poisons, MSDS, and related services)

· Geographical Information Systems (GIS) (e.g. mapping and cartography, Natural Resource Planning, Site Selection, Migration Pattern Analysis, Pollution Analysis and Emergency Preparedness Planning)

· Remediation Services (e.g. excavation, removal, transportation, storage, treatment, and/or disposal of hazardous waste preparation, characterization, field investigation, conservation and closure of site, containment, monitoring and/or reduction of hazardous waste sites, and ordinance removal and support)

· Economic, Technical and/or Risk Analysis

· Homeland Security issues, including vulnerability assessments, biochemical protection, identification of threats and protective measures to mitigate the threats and Crime Prevention through Environmental Design (CPTED) surveys

Section C – Labor Category Summary Information

CONTRACT NUMBER

GS-00F-0054M

JOB REQUIREMENTS

3rd Option

5/21/14 – 5/20/19 Special

Item

Numbers

(SINs)

Reg. / Cert.

Brief Description of

Duties and Responsibilities

871.2 871.3 871.4 899.1

871.2 871.3 871.4 899.1

Assists in all phases of excavation

871.2 871.3 871.4

871.2 871.3 871.4

871.2 871.3 871.4

871.1

871.2

871.3

871.2 871.3 871.4 899.1

871.2 871.3 871.4 899.1

871.2 871.3 871.4 899.1

Performs clerical and secretarial duties, including typing, processing invoices, and transcribing information

Responsible for preparation of NEPA compliance documents including Environmental Impact Statements (EIS), Env. Assessments (EA), and Categorical Exclusions

Provides technical assistance in research, analysis, and scientific studies

Provides oversight to field crews performing inspections, maintains logs and status reports, electronic collection devices

871.2 871.3 871.4

Performs construction field inspections for site, transportation and infrastructure projects and condition assessments

871.2 871.3 871.4

871.2 871.3 871.4

871.2 871.3 871.4

871.2 871.3 871.4

Produces by conventional and electronic means graphic renditions, art work and images for proposal/reports, PowerPoint

871.2 871.3 871.4

metrist Manages technical staff & prepares proposals and pricing related to the development of photogrammetric mapping

871.2 871.3 871.4

metrist Performs stereo feature extraction using photogrammetric techniques, topo mapping, AT and remote sensing

871.2 871.3 871.4

Develops and prepares landscape design plans and construction documents, cost estimates; prepares planting specifications

871.2 871.3 871.4

871.2 871.3 871.4

Prepares comprehensive plans, requirements analysis, report prep; knowledge of MIL STDS; prepares DD1391's; CADD and GIS

Responsible for Public Relations programs, including the production of public information and display materials, public meeting coordination, and media relations

Assists in the development of Public Relations programs, including public meetings coordination and media relations

871.2 871.3 871.4

871.2 871.3 871.4

Prepares site plans of land development projects; requirements analysis; environmental overview and cost estimates

871.2 871.3 871.4

871.2 871.3 871.4

871.2 871.3 871.4

871.4

871.2 871.3 871.4 899.1

Three-person crew performs survey functions such as rod and chainman, staking, and field calculations. Maintains survey instruments

871.2 871.3 871.4

Contributing author, author or editor in the preparation of technical documents, handbooks, manuals or guidelines

Senior technical specialist for flora and fauna surveys, natural resource management plans, Biological Assessments, and other scientific research and analysis

Assists with flora and fauna surveys, Biological Assessments, and other scientific research and analysis

871.4

871.2 871.3 871.4 899.1

SCA Matrix

SCA Eligible Contract Labor Category

SCA Equivalent Code – Title

WD Number

Clerical

01111 – General Clerk I

05-2248

Graphic Artist

29150 – Graphic Artist

Technical Writer

29480 – Technical Writer

05-2248

Archaeology Technician 29023 – Archeological Technician I 05-2248

Survey Field Coordinator 99658 – Survey Party Chief

Survey Crew

99659 – Surveying Technician

The Service Contract Act (SCA) is applicable to this contract and it includes SCA applicable labor categories. The prices indicated (**) SCA labor categories are based on the U.S. Department of Labor Wage Determination Number(s) identified in the SCA matrix. The prices offered are based on the preponderance of where work is performed and should the contractor perform in an area with lower SCA rates, resulting in lower wages being paid, the task order prices will be discounted accordingly.