GAS GUN SOW Rev1 COPY FOR POSTING.docx
DOCX document 19 KB Posted
- Attached to
- GAS GUN Federal contract opportunity
- Solicitation number
- N0017821Q7022
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0017821Q7022 SF18.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HYPERSONIC GAS GUN
STATEMENT OF WORK (SOW)
1.0 BACKGROUND
The lethality branches (H32/H35) provide detailed target vulnerability assessments & weapon lethality analyses for developmental & fielded kinetic, electric, and cyber weapons through the development & application of testing, high fidelity & engineering level modeling, and analysis. H32/H35 provide independent, third party assessments of weapon systems in support of operational systems, acquisition programs and future technologies. A two-stage hypersonic gas gun will be used to expand the Shock Physics facility capabilities for hypersonic capability development and assessment.
2.0 APPLICABLE DOCUMENTS
Original Equipment Manufacturer (OEM) Specifications
| 3.0 | REQUIREMENTS |
| 3.1 | The Contractor shall provide each Contractor employee with the personal protective equipment required to do their job safely and in compliance with all applicable regulations. |
| 3.1.1 | All Contractor personnel shall maintain social distancing and wear a facemask at all times while onsite at the NSWCDD base until notified otherwise by the government. |
| 3.2 | The Contractor shall provide one reconditioned (1) 60mm/20mm Gas-driven Two-Stage Light Gas Gun to include the following: |
· 30L Gas Breech with 10,000 psi Maximum operating pressure;
· One (1) 60mm Pump Tube;
· One (1) High Pressure Section assembly with integral shield and hydraulic coupler;
· 20mm 2-sections Launch Tube Assembly;
· One (1) Floor Mount to support Gun Assembly that allows for easy disassembly for between shot maintenance;
· Control Valves to pressurize and fire the gun;
· One (1) PC Based Labview System to control the pressurizing, firing, and venting of the gun;
· One (1) air driven Gas Booster to pressurize gas breech up to 10ksi from use supplied compressed gas source;
| 3.3 | The Contractor shall provide firing expendables (less gas) for 25 shots. |
| 3.4 | The Contractor shall delivery to the NSWCDD on a flatbed trailer. |
NOTE: NSWCDD will be responsible for offload of equipment.
| 3.5 | The Contractor shall provide onsite installation in accordance with (IAW) OEM specifications. |
| 3.6 | The Contractor shall provide a demonstration of the system to ensure it is operating IAW OEM specifications and government personnel understand the use of the Gun Assembly. |
| 3.7 | The Contractor shall provide one (1) Evacuation System including inlet filter and control valves. |
| 3.8 | The Contractor shall provide one (1) Near Muzzle laser interrupt type projectile detection/velocity measurement system to include TTL output for instrumentation triggering. |
| 3.9 | The Contractor shall provide one (1) Sabot Separation/Stopping Assembly. |
| 3.10 | The Contractor shall coordinate with the technical point of contact (TPOC) identified below to complete this effort. |
| 4.0 | GOVERNMENT-FURNISHED PROPERTY/MATERIAL/INFORMATION (GFP/GFM/GFI) |
| 4.1 | The government will provide access to the base. |
| 4.2 | The government will provide offload of equipment. |
| 5.0 | SECURITY |
The work to be performed under this contract is unclassified.
6.0 TRAVEL
The contractor will be required to travel in performance of this contract. The number of trips and types of personnel traveling shall be limited to the minimum required to accomplish work requirements and shall be coordinated with the technical point of contact. All travel shall be conducted in accordance with the Federal Travel Regulations (FTR). The following travel is anticipated: Three (3) personnel, two (2) days on site with a total of four (4) days for travel, to Dahlgren, VA.
7.0 TECHNICAL POINT OF CONTACT
To be provided at time of award.
File details come from the government source that posted it. Updated .