Sol_G15PS00444_Amd_000001.pdf

(x)

G15PS00444

x x copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Denver CO 80225-0046

GD3

204 Denver Federal Center PO Box 25046 Team C USGS OAG Denver Acquisition Branch

GDB

DENVER CO 80225-0046

204 DENVER FEDERAL CENTER

PO BOX 25046

USGS OAG DENVER ACQUISITION BRANCH

06/01/2015000001

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

05/15/2015

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to include the attached updated Salient Characteristics.

The time for submission of quotations is extended to 06/09/2015 at 1200 MT.

Offerors may submit quotations via email to cweatherford@usgs.gov, or via FedConnect.net.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Callista Weatherford

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

SALIENT CHARACTERISTICS

REQUIREMENTS FOR BOREHOLE VIDEO SURVEYING SYSTEM

Item 1 is a DC-5150 Water Well Video Surveying System. (or equivalent)

1. Shall work in wells ranging from 3 inches to 24 inches in diameter.

2. Shall be constructed of stainless steel with water tight cable connections.

3. Shall allow for forward and side viewing (changeable from operator console).

4. Shall include selectable lighting controls (changeable from operator console).

5. Shall be pressure tested to 2,500 psi.

6. Shall include stainless steel centering bands for 4-24 inch casings.

7. Shall include a camera carrying case durable enough for shipping.

8. Shall allow lens rotation (forward/reverse), speed of rotation, and focus control (changeable from operator console).

9. Shall include camera control unit with diagnostic displays.

10. Shall allow for 6 digit display of depth on video monitor.

11. Shall include a minimum of 2,000 feet of ¼ inch armored coaxial cable.

12. Shall include draw works system with electric motor and speed controller.

13. Shall be compatible with 110-120v power source.

14. Shall include DVD recorder, monitors, and all cables needed to run the system.

15. Shall include all software needed to collect, edit, and display data collected.

16. Shall include a portable tripod for positioning camera over borehole.

17. Shall include auxiliary light head for improved forward view visibility in turbid or cloudy water and for viewing boreholes up to 36” diameter.