Sol_G15PS00294.pdf

G15PS00294

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

03/30/2015 0040205438

1 45

PO BOX 25046

204 DENVER FEDERAL CENTER

DENVER CO 80225-0046

USGS OAG DENVER ACQUISITION BRANCH

05/31/2016

USGS National Water Quality Lab

DFC Bldg 95 E3

Denver

CO 80225

303 236-9339Callista Weatherford

04/07/2015 1700 ET

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

Questions shall be in writing to cweatherford@usgs.gov no later than 4/2/2015 at 12:00 Noon Mountain Time. Questions submitted after this date and time may not be answered. If needed, an amendment with a question and answer document will be issued after questions submittal deadline. Any extensions to quote submittal date and time will be at the Contracting Officer's discretion.

Offerors may submit quotations via email to cweatherford@usgs.gov, or via FedConnect.net.

Period of Performance: 06/01/2015 to 05/31/2020

00010 Base Year Pipettes and Balances Maintenance shall be in acordance with the attached statement of Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 45

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

G15PS00294

work.

Services, non-personal, to provide all plant, materials, and labor necessary to complete the attached statement of work.

Offerors shall quote a firm fixed price. Billing shall be in arrears. Offerors may quote monthly, quarterly, or yearly price.

Delivery: 05/31/2016

Period of Performance: 06/01/2015 to 05/31/2016

00020 Option Year 1 Pipettes and Balances Maintenance 1 AU shall be in acordance with the attached statement of work.

Services, non-personal, to provide all plant, materials, and labor necessary to complete the attached statement of work.

Offerors shall quote a firm fixed price. Billing shall be in arrears. Offerors may quote monthly, quarterly, or yearly price.

(Option Line Item)

05/31/2016

Period of Performance: 06/01/2016 to 05/31/2017

00030 Option Year 2 Pipettes and Balances Maintenance 1 AU shall be in acordance with the attached statement of work.

Services, non-personal, to provide all plant, materials, and labor necessary to complete the attached statement of work.

Offerors shall quote a firm fixed price. Billing shall be in arrears. Offerors may quote monthly, quarterly, or yearly price.

(Option Line Item)

05/31/2017

Period of Performance: 06/01/2017 to 05/31/2018

00040 Option Year 3 Pipettes and Balances Maintenance 1 AU shall be in acordance with the attached statement of work.

Services, non-personal, to provide all plant, materials, and labor necessary to complete the attached statement of work.

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 45

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

G15PS00294

Offerors shall quote a firm fixed price. Billing shall be in arrears. Offerors may quote monthly, quarterly, or yearly price.

(Option Line Item)

05/31/2018

Period of Performance: 06/01/2018 to 05/31/2019

00050 Option Year 4 Pipettes and Balances Maintenance 1 AU shall be in acordance with the attached statement of work.

Services, non-personal, to provide all plant, materials, and labor necessary to complete the attached statement of work.

Offerors shall quote a firm fixed price. Billing shall be in arrears. Offerors may quote monthly, quarterly, or yearly price.

(Option Line Item)

05/31/2019

Period of Performance: 06/01/2019 to 05/31/2020

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Balance and Mechanical Volumetric Dispensing Devices (MVDD) Statement of Work

52.252-2 Clauses Incorporated by Reference. (FEB 1998)

Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (APR 2013)

GS1117 Deobligation of Unexpended Funds MAY 2013

52.000S-5079 Technical Liaison - Technical Direction (OCT 1997)

52.900S-1016 Responsible Employee. (OCT 1997)

52.000S-5105 Parts (OCT 1997)

52.217-9 Option to Extend the Term of the Contract. (MAR 2000)

52.217-5 -- Evaluation of Options. (JUL 1990)

52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (MAR 2015)

52.212-3 Offeror Representations and Certifications -- Commercial Items (MAR 2015)

This solicitation will utilize the policies contained in the Federal Acquisition Regulations (FAR) Part 12 in conjunction with the policies and procedures for solicitation evaluation and award prescribed in FAR Part 13, Simplified Acquisition Procedures, as appropriate for this acquisition.

Award will be made to that offeror whose offer, conforming to the solicitation, is the lowest price technically acceptable offer. A technically acceptable offer will meet or exceed all requirements below.

Balance and Mechanical Volumetric Dispensing Devices (MVDD) Statement of Work

The United States Geological Survey (USGS), National Water Quality Laboratory (NWQL) offers environmental analytical services. The NWQL utilizes approximately 45 balances and approximately 300 MVDDs that require ongoing and routine inspection, cleaning, calibration, maintenance, and repair.

Note: Balance and MVDD certifications shall be National Institute of Standards and Technology (NIST) traceable and compliant.

The contractor shall provide all equipment, labor, and materials (unless otherwise provided herein) necessary to perform the following tasks:

1. Balance service should include bi-annual inspection (previously April, October), cleaning, and calibration (60 day warranty on all inspection services). The calibration of laboratory balances shall be performed using Class S (or better) test weight sets. A copy of the current (within the past year) weight certification certificate shall be provided for each weight set used. The certificate shall be presented to the designated USGS technical contact before any work is done in support of this agreement, and annually thereafter. The certification documentation shall include:

A. The identification of the certification supplier.

B. The identification of the calibration standard (manufacturer, type, model, serial number and any other unique identifier), the standard’s range and accuracy, and NIST traceability or similar information when using other recognized standards. As an alternative, it is acceptable for the calibration documentation to provide reference to documents containing the standard’s identity, range, accuracy, and traceability.

C. The date the calibration was performed.

D. Records of the actual calibration data values, when applicable, both before and after any adjustments. This will allow the determination of whether or not the equipment used was and is within the required tolerances or accuracy. If adjustments are not required, the second data set is not necessary.

E. Identification of the person performing the calibration.

2. Calibration certificates for each laboratory balance calibrated shall be completed and submitted to the designated USGS technical contact within two weeks (ten business days) of the calibration.

The balance calibration certificates shall include the following information:

A. Identification of the equipment (manufacturer, type, model, and serial number).

B. Identification of the calibration standard used (see item 1 B).

C. Date of balance calibration.

D. A record of the actual calibration values (see item 1 D).

E. Identification of the person and company performing the calibration.

3. MVDD service shall include quarterly inspections (previously March, June, September, and December), cleaning, and calibration (60 day warranty on all inspection services). Worn parts (O-rings, seals, etc.) shall be replaced as required with parts billed as a separate item on invoices.

The NWQL will provide a computer, printer, and Pipette Tracker software system on-site for MVDD calibration and documentation by the contractor. The calibration of MVDDs shall be performed on-site using a calibrated balance provided by the contractor. A copy of the balance calibration information shall be provided to the designated USGS technical contact before the calibration of any NWQL MVDD. The certification shall include information identified in 1 above.

4. The contractor is required to provide on-call and on-site repair/service for the balances or MVDDs listed on the attached inventory sheets. The contractor is expected to acknowledge a request for service within one business day (24 hours) from the time the service call is received from the USGS technical contact. Repairs/service shall commence within 3 business days of the service request acknowledgement.

5. Normal services and calibration shall be performed on-site at the NWQL. If it is necessary to remove a balance from the NWQL for repairs, the contractor shall provide a written (e-mail is acceptable) estimate of the date of return (EDR). This date shall be determined within one week (5 business days) from the day the balance is removed from the laboratory.

If the balance or MVDD cannot be repaired and returned before the EDR, the service representative shall notify the USGS technical contact and a new EDR must be agreed upon.

6. Location: All work under this agreement, except as noted is to be performed at the location identified below. The contractor shall be given a work area within the laboratory area of the building.

US Geological Survey, NWQL Denver Federal Center, Bldg 95 Denver, CO 80225

7. Period of performance:

Scheduled work shall be performed between 7:00am to 4:00pm MST, Monday – Friday, with the exception of Government holidays. Resultant award shall identify a USGS technical contact that will coordinate the work schedule with the awarded vendor. The contractor shall notify the point of contact of changes to the schedule agreed upon.

8. USGS technical contact will be identified at time of award.

9. The contractor shall comply with all federal and USGS safety and security requirements.

Model Serial # Manufacturer

H160 35120015 Sartorious R160P 37090017 Sartorious AG204 1120482523 Mettler AE50 L40418 Mettler SP4001 7130320432 Ohaus AE100 C91342 Mettler PM6100 M27316 Mettler B1302 1114040022 Mettler A200S 37040149 Sartorious AR3130 1218450065 Ohaus PM4800 1114012411 Mettler PE160 47490053 Mettler XS205 1128342792 Mettler PM6100 L69454 Mettler CT600-S 6749 Ohaus CT6000-S 6391 Ohaus PM600 M36570 Mettler PL300 684458 Mettler AT200 M61783 Mettler XP204 B013021550 Mettler PC440 817916 Mettler XP204 B020035797 Mettler PM600 M21130 Mettler XS1003S B014023510 Mettler BP221S B0207598 Sartorious R160P 37040060 Sartorious XP205 1126223413 Mettler PG503-S 1118390409 Mettler PB3002 1114263659 Mettler GT210 2738 Ohaus AT200 M63702 Mettler GT210 2765 Ohaus BL3100 13606734 Sartorious PB5001 2113264195 Mettler U6100 36040090 Sartorious PB3002 1114440413 Mettler XS2100 75769 Denver SP4001 Ohaus CT600S 14233 Ohaus AC210S 11200212 Sartorious

Pipette ID & other ID Description

00012-100uL-TFA DRUMMOND 100uL 00013-100uL DRUMMOND 100uL 00014-25uL VWR/DRUMMOND 25uL VARIABLE 00017-H1101413U RAININ E4 XLS 10mL 00018-J1102774U RAININ E4 XLS 1000uL 00021-10mL Rainin edp 10mL 00022-L1202490U RAININ E4 XLS 10mL 00024-25uL VWR/Drummond 25uL 00025-10mL Rainin edp 10mL liq. end 00026-L1100033U RAININ E4 10mL 00027-K1103036U RAININ E4 10mL 00028-L1100185U RAININ E4 XLS 1000uL 00029-A1200454U RAININ E4 XLS 10mL 00030-1022555 VIAFLO 125uL 00031-1022562 VIAFLO 12.5uL 00032-1022572 INTEGRA 5000uL 00033-1022392 VIAFLO 1250uL 00045-B1302896U RAININ E4 XLS 2000uL 00046-B1302861U RAININ E4 XLS 2000uL 00047-B1302881U RAININ E4 XLS 10mLL 00048-A1301643U RAININ E4 XLS 10mLL 00049-C1323390T RAININ XLS 10mL 00050 / C1323311T RAININ XLS 10mL 00051-10mL Rainin edp 10mL 00052-06051752 WHEATON 1000uL 00053-0001021282 INTEGRA 1250uL 00054-0001021263 INTEGRA 5000uL 00055-1021275 VIAFLO 1250uL 00056-1021260 VIAFLO 125uL 00057-1021339 VIAFLO 12.5uL 00073-E1001083E edp3 5mL LTS 00074-A1046653E edp3 2mL LTS 00075-06001954 VIAFLO 1250uL 00076-06002036 VIAFLO 125uL 00077-06001898 VIAFLO 12.5uL 00081-100uL RAININ edp1 100uL 00090-C1323445T RAININ XLS 10mL 00091-C1323312T RAININ XLS 10mL 00092-G1358237T RAININ XLS 2000uL

00094-03K47876 BRAND DISPENSETTE

00098-10mL Rainin edp 10mL

02000 / SPE-RS-2001-001 VWR/DRUMMOND 100uL 02001 / SPE-SU-2001-001 VWR/DRUMMOND 100uL 02003 / SPE-RS-2003-001 VWR/DRUMMOND 100uL 02004 / SPE-RS-2002-001 VWR/DRUMMOND 100uL 02005 / SPE-RS-1402-001 VWR/ DRUMMOND 100uL 02007 / 2080-100uL-TFA VWR/DRUMMOND 100uL

02009-50uL VWR / DRUMMOND 100uL

ADJUSTABLE

02012 / 100uL-TFA VWR/DRUM. 100uL 02014-50uL 50uL fixed 02016-100uL VWR/DRUMMOND 100uL 02017-TFA-50uL VWR/DRUM. 100uL 02019-25uL VWR/DRUMMOND 25uL 02021 / WAT-RS-1319-001 VWR/DRUM. 100uL 02022 / WAT-RS-1324-001 VWR/DRUM. 100uL 02023 / WAT-SU-OCOP-001 VWR/DRUM. 100uL 02024 / WAT-RS-1608-001 VWR/DRUM. 100uL 02025 / WAT-RS-1396-001 VWR/DRUM. 100uL 02026 / WAT-SU-1396-001 VWR/DRUM. 100uL 02027 / WAT-RS-1398-001 VWR/DRUM. 100uL 02028 / CLLE-RS-1383-002 DRUMMOND100uL

02031-50uL VWR/DRUMMOND 50uL

ADJUSTABLE

02034 / WAT-SU-1304-002 VWR/DRUM. 100uL 02036 / SPE-SU-2060-001 VWR/DRUM. 100uL 02037 / SPE-RS-2060-001 VWR/DRUM.100uL 02038-7131 OXFORD 10mL MACRO-SET 02039-10031514 VWR/WHEATON 5mL VARIABLE 02040-08051043 VWR/WHEATON 5mL VARIABLE 02041 / WAT-STD-0C20-001 DRUMMOND 25uL ADJUSTABLE 02043-79010392 VWR/HTL 1000uL 02044-100uL VWR/DRUMMOND 100uL 02045 / SPE-RS-1379-002 VWR/DRUMMOND 100uL 02047 / SPE-IS-2060-001 50uL 02048-10uL DRUMMOND 10uL 02049 / 2080-TFA-100uL VWR/DRUMMOND 100uL 03000-250uL VWR / DRUMMOND 250uL 03002 / SPE-RS-1433-001 DRUMMOND 100uL variable 03003-200uL VWR / DRUMMOND 200uL 03004-10uL VWR/DRUMMOND 10uL 03005-100uL VWR/DRUMMOND 100uL VARIABLE 03006-100uL VWR/DRUMMOND 100uL 03007-100uL DRUMMOND 100uL variable pd

03008-100uL DRUMMOND 100uL 03009 / SED-SU-2500-001 DRUMMOND 50uL 03010 / SED-IS-2502-001 DRUMMOND 50uL 03012-25uL DRUMMOND / VWR 25uL variable 03013-25uL DRUMMOND 25uL 03014-10uL DRUMMOND / VWR 10uL variable 03015-08031060 5mL variable 03016-250uL DRUMMOND / VWR 250 03017-100uL VWR/DRUMMOND 100uL 03018-10uL DRUMMOND / VWR 10uL variable 03019-10uL VWR / DRUMMOND 10uL VARIABLE 03020-100uL VWR/DRUMMOND 100uL 03021-100uL VWR/DRUMMOND 100uL 03023-50uL VWR/DRUMMOND 50uL 03024-250uL VWR / DRUMMOND 250uL 03025-1000uL VWR/DRUMMOND 1000uL 03026-25uL VWR / DRUMMOND 25uL VARIABLE 03028 / SED-SU-2501-001 DRUMMOND 100uL 03029 / SED-SU-2502-001 DRUMMOND 100uL 03030 / SED-RS-2502-001 DRUMMOND 100uL 03031 / SED-RS-2501-001 DRUMMOND 100uL 03032 / SED-RS-2500-001 DRUMMOND 100uL 03034-50uL DRUMMOND 50uL 03036 / SED-DL-2501-001 DRUMMOND 50uL 03038 / SED-RS-8375-001 DRUMMOND 10uL 03042-200uL DRUMMOND 200uL 03043-100uL DRUMMOND 100uL variable 03044-50uL VWR/DRUMMOND 50uL VARIABLE 03045-25uL DRUMMOND 25uL variable 03046-10uL DRUMMOND 10uL VARIABLE 03047 / 09051389 WHEATON 5mL VARIABLE 03048-10111037 WHEATON 5mL VARIABLE 03049-1000uL DRUMMOND 1000uL 03050-1000uL DRUMMOND 1000uL VARIABLE 03051-250uL DRUMMOND 250uL 03053-100uL DRUMMOND 100uL ADJUSTABLE 03054-50uL DRUMMOND 50uL ADJUSTABLE 03055-25uL DRUMMOND 25uL variable 03056-10uL VWR/DRUMMOND 10ul variable 03058-100uL VWR/DRUMMOND 100uL

03060-100uL VWR/DRUMMOND 100uL

ADJUSTABLE

03064-25uL DRUMMOND 25uL ADJUSTABLE

03068-25uL DRUMMOND 25uL ADJUSTABLE 03069-25uL DRUMMOND/VWR 25uL VARIABLE 03070-100uL DRUMMOND 100uL variable 03071-100uL VWR/DRUMMOND 100uL 03072-200uL VWR / DRUMMOND 200uL 03078 / SPE-IS-2080-001 VWR/DRUM. 50uL ADJUSTABLE 03080-10uL VWR/DRUMMOND 10uL variable 03081-200uL VWR/DRUMMOND 200uL 03082-1000uL DRUMMOND / VWR 1000uL variable 03083-50uL DRUMMOND / VWR 50uL variable 03084-100uL DRUMMOND / VWR 100uL 03085 / 1404-SUROGATE DRUMMOND 100uL 03086 / 1404-SPIKE DRUMMOND 100uL 03087-50uL DRUMMOND / VWR 50uL variable 03088-100uL DRUMMOND 100uL 03090-200uL VWR/DRUMMOND 200uL 03091-100uL VWR 100uL VARIABLE 03092-100uL VWR/DRUMMOND 100uL 03093-50uL VWR/DRUMMOND 50uL 03099-100uL VWR/ DRUMMOND 100uL 03100-100uL DRUMMOND 100uL 04001-100uL RAININ edp 100uL liq. end 04002-1000uL RAININ edp 1000uL liq. end 04003-2500uL RAININ edp 2500uL liq. end 04004-1000uL RAININ edp 1000uL liq. end 04006 / SPE-RS-2080-001 DRUMMOND 100uL ADJUSTABLE

04007 / SPE-SU-2080-001

VWR/DRUMMOND 100uL

ADJUSTABLE

04008-10uL RAININ edp 10uL liq. end 04010-100uL DRUMMOND / VWR 100uL variable pd 04011-100uL DRUMMOND / VWR 100uL variable pd 04012-50uL DRUMMOND / VWR 50uL variable pd 04013-25uL DRUMMOND / VWR 25uL variable pd 04014-185302 eppendorf RESEARCH 1000uL 04017-250uL DRUMMOND 250uL 04019-25uL DRUMMOND / VWR 25uL variable pd 04020-250uL RAININ edp 250 liq. end 04029-250uL RAININ edp 250uL liq. end 04030-1000uL RAININ edp 1000uL liq. end 04031-49950L eppendorf 4710 1000uL 04033-B0101391A RAININ L10mL 04036-25uL RAININ edp 25uL Liq. End 04037-10uL VWR 10uL

04038-25uL VWR/DRUMMOND 25uL 04039-A1416592U RAININ E4 XLS 1000uL 04040-A1416834U RAININ E4 XLS 100uL 04041-A1416898U RAININ E4 XLS 10uL 04044-F1353616U RAININ E4 XLS 10mL 04045 / G1356093U RAININ E4 XLS 1000uL 04046 / F1353687U RAININ E4 XLS 100uL 04050-10mL Rainin edp 10mL liq. end 05010-134300 eppendorf 4810 1000uL 05015-1000uL RAININ edp 1000uL 05016-353949 eppendorf Reference 100uL 05021-1000uL edp LIQ. END 1000uL 05033-7314 Oxford Macro-Set 5mL 05037-B601289 Rainin edp 1000uL 05046-2302 Macro-Set 10mL 05049-174970 eppendorf REFERENCE 100uL 05051-3145603 eppendorf RESEARCH 1000uL 05053-E0400118F RAININ edp 20mL 05064-L0768849E RAININ edp 20mL 05067-D1095960E RAININ edp3 10mL 05068-10uL VWR / DRUMMOND 10uL 05069-10mL edp LIQ. END 10mL 05072-284746 eppendorf REFERENCE 1000uL 05076-D1203708U RAININ E4 XLS 1000uL 05077-25uL edp LIQUID END 25uL 05078-250uL edp LIQUID END 250uL 05079-A1430334U RAININ E4 XLS LTS 10mL 05080-10mL Rainin edp 10mL liq. end 06000-C0209930A RAININ L10mL 06001-F0101763A RAININ L10mL 06015-3209 OXFORD MACRO-SET 5mL 06017-100uL VWR 100uL fixed 06018-12091146 WHEATON 5mL 06024-100uL edp 100uL 06025-250uL RAININ edp 250 06026-2500uL edp 2500 06028-100uL DRUMMOND 100uL 06029-1000uL edp 1000uL 06032-08051031 VWR/WHEATON 5mL 831 06033-C0205646A RAININ L10mL 06034-G1030172F RAININ edp1 20mL LTS 06036-10mL RAININ edp 10mL liq. end 07014-311199 eppendorf 4810 1000uL

07046-10mL Rainin edp 10mL

07048-03K47907 DISPENSETTE BRAND

08001-F0101561A Rainin L10mL 08003-4304 OXFORD MS 5mL 08008-1000uL RAININ edp 1000uL liq. end 08009-D000922 Rainin edp2 1000uL 08013-100uL Rainin edp 100uL 08014-E100049 Rainin edp2 100uL 08015-D000382 Rainin edp2 100uL 08017-B0106054A Rainin L10mL 08018-F100054 Rainin edp2 1000uL 08019-F100086 Rainin edp2 1000uL 08028-B0101386A RAININ L10mL 08033-33428L eppendorf 4710 1000uL 08045-100uL Rainin edp 100uL 08047-Y61602C GILSON P10mL 08049-I0659978A Rainin L10mL 08055-H0646056A Rainin L10mL 08056-I0659961A Rainin L10mL 08057-10mL Rainin edp 10mL liq. end 08060-I0661274A Rainin L10mL 08062-I0661217A Rainin L10mL 08063-10mL Rainin edp 10mL 08066-D0753972A RAININ L10mL 08070-100uL edp LIQ. END 100uL 08072-1000uL Rainin edp 1000uL 08074-1000uL RAININ edp 1000uL liq. end 08076-100uL Rainin edp 100uL 08078-203158 Vistalab 10mL 08085-H0958763A RAININ L10mL 08086-H0958801A RAININ L10mL 08087-H0958793A RAININ L10mL 08090-100uL edp LIQ. END 100uL 08093-100uL edp LIQ. END 100uL 08094-I0817771E RAININ edp3 10mL 08095-I0817921E RAININ edp3 1000uL 08096-I0817440E RAININ edp3 100uL 08099-1000uL Rainin edp 1000uL liq. end 09002-1000uL Rainin edp 1000uL liq. end 09004-73879 eppendorf 4810 1000uL 09005-100uL VWR 100uL fixed 09006-56554 eppendorf 4810 100uL 09007-03277N eppendorf 4700 100uL fixed

09009-1000uL edp 1000uL liq. end 09014-200uL VWR 200uL fixed 09015-100uL VWR 100uL fixed 09016-100uL VWR 100uL fixed 09017-100uL VWR 100uL fixed 09018-100uL VWR 100uL fixed 09019-100uL VWR/DRUMMOND 100uL 09020-100uL DRUMMOND 100uL 09023-25uL VWR/Drummond 25uL fixed 09024-11061213 VWR/WHEATON 5mL 09027-10uL VWR 10uL fixed 09029-50uL VWR/DRUMMOND 50uL 09031 / 8058-SPIKE-1433 DRUMMOND 200uL 09032-100uL DRUMMOND 100uL 09033-100uL DRUMMOND 100uL 09034-100uL VWR 100uL fixed 09035-100uL VWR 100uL fixed 09037-100uL VWR 100uL fixed 09038-0184 Oxford MS 5mL 09039-09888Q eppendorf 4710 10uL 09040-7131 Oxford MS 10mL 09044-100uL RAININ edp 100uL liq. end 09046-34111M eppendorf 4710 100uL 09047-2500uL RAININ edp 2500uL liq. end 09050-50uL VWR 50uL variable pd 09051-284675 eppendorf 2000 1000uL variable 09052-02588L eppendorf 4700 100uL fixed 09053-10uL VWR 10uL fixed 09054-25uL VWR 25uL variable pd 09055-25uL RAININ edp 25uL liq. end 09058-10uL RAININ edp 10uL liq. end 09059-1000uL Rainin edp 1000uL liq. end 9063 Rainin edp 1000uL liq. end 09065-262689 eppendorf 2000 100uL variable 09066-302814 eppendorf 2000 100uL fixed 09068-275381 eppendorf 2000 10uL variable 09071-028597 VWR/WHEATON 5mL 09072-100uL DRUMMOND 100uL 09073-50uL DRUMMOND 50uL 09075-100uL DRUMMOND 100uL 09083-100uL VWR/Drum. 100 variable pd 09084-100uL VWR 100uL FIXED PD 09086-1000uL VWR/DRUMMOND 1000uL adjustable

09087-50uL VWR/DRUMMOND 50uL adjustable 09088-100uL VWR/DRUMMOND 100uL adjustable 09089-10uL VWR/DRUMMOND 10uL 09090-100uL RAININ edp100uL LIQ.END 09093-1904794 eppendorf 2100 100uL 09094-200uL DRUMMOND 200uL 09095-08031076 VWR/WHEATON 5mL 09099-250uL RAININ edp 250uL liq. end 10001-49630K 4700 100uL FIXED 10003-03525L 4710 100uL 10007-07193M 4700 50uL FIXED

10012-G18743K GILSON P100

10022-MD91FB3674

HAMILTON MICROLAB 500

DILUTOR

10022-MD91FB3674-2

HAMILTON MICROLAB 500

DILUTOR

52.252-2 Clauses Incorporated by Reference. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/ http://www.doi.gov/pam/aindex.html

52.217-8 Option to Extend Services. (NOV 1999)

52.212-1 Instructions to Offerors - Commercial Items. (APR 2014)

52.204-7 System for Award Management (JUL 2013)

52.212-4 -- Contract Terms and Conditions -- Commercial Items (DEC 2014)

52.225-25 Prohibition on Engaging in Sanctioned Activities Relating to Iran-Certification.

(SEP 2010)

52.204-13 – System for Award Management Maintenance (JUL 2013)

52.232-39 – Unenforceability of Unauthorized Obligations. (JUN 2013)

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. (DEC 2013) http://www.acquisition.gov/far/

52.204-16 Commercial and Government Entity Code Reporting. (NOV 2014)

52.204-17 Ownership or Control of Offeror. (NOV 2014)

52.204-18 Commercial and Government Entity Code Maintenance. (NOV 2014)

52.204-19 Incorporation by Reference of Representations and Certifications. (NOV 2014)

Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (APR 2013)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

Copy of contractor’s internally generated invoice

The Contractor must use the IPP website to register, access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

GS1117 Deobligation of Unexpended Funds MAY 2013

The contractor shall submit all invoices under the award no later than 90 calendar days after the period of performance has expired, unless a request for extension has been submitted to the Contracting Officer.

After 120 days has passed since the expiration of the performance period, the government reserves the right to issue a unilateral modification deobligating any unexpended funds, and to initiate closeout procedures.

52.000S-5079 Technical Liaison - Technical Direction (OCT 1997)

(a) The performance required herein shall be subject to the technical direction of the Technical Liaison (TL) as identified below.

As used herein, "technical direction" is defined as direction to the contractor that fills in details, suggests possible lines of approach, or otherwise supplements the scope of the work set forth herein and shall not constitute a new assignment, and does not supersede or modify any article or clause of this contract.

(b) The Technical Liaison is not authorized to perform, formally or informally, any of the following actions:

(1) Promise, award, agree to award, or execute any contract, contract modification, or notice of intent that changes or may change this contract;

(2) Waive or agree to modification of the delivery schedule;

(3) Make any final decision on any contract matter subject to the Disputes Clause;

(4) Terminate, for any reason, the contractor's right to proceed;

(5) Obligate in any way, the payment of money by the Government. Only a warranted Contracting Officer is authorized to obligate funds on this or any other contract action.

(c) The contractor shall immediately notify the Contracting Officer in writing if the Technical Liaison has taken an action (or fails to take action) or issues direction (written or oral) that the contractor considers to exceed the above limitations.

(d) The Technical Liaison assigned for this contract will be listed at time of award on the cover page.

52.900S-1016 Responsible Employee. (OCT 1997) Employee responsible for controlling expenditures on this order is listed as a government contact. This order expires when maximum amount or time limitation is reached.

52.000S-5105 Parts (OCT 1997)

Parts, if needed, shall be invoiced at either the vendor's current established parts price list (less any applicable discounts) in effect at the time of installation or at a rate not to exceed that charged to the vendor's most favored customer for the same item in like quantities, or the current market price, whichever is lower.

52.217-9 Option to Extend the Term of the Contract. (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor prior to contract expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years.

52.217-5 -- Evaluation of Options. (JUL 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (MAR 2015)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C.

3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

_X__ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

_X__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

___ (10) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May 2012) (section 738 of Division C of Public Law 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved]

_X__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2014) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Oct 2001) of 52.219-9.

___ (iii) Alternate II (Oct 2001) of 52.219-9.

___ (iv) Alternate III (Oct 2014) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).

_X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Jul 2013) (15 U.S.C. 637(m)).

_X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

___ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2014) (E.O.

13126).

_X__ (27) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

_X__ (28) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

_X__ (29) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).

_X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C.

793).

__X_ (31) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X__ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Aug 2013). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514

___ (ii) Alternate I (Jun 2014) of 52.223-13.

___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b).

___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

__X_ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).

___ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

___ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C.

4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).

___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_X__ (50) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (51) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

___ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C.

chapter 67).

___ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__X_ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

___ (8) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

___ (9) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

___ (10) 52.222-55, Minimum Wages Under Executive Order 13658 Dec 2014)(Executive Order 13658).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C.

3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).

(vi) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C.

793).

(vii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

(viii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(ix) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(x) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C.

chapter 78 and E.O. 13627).

___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xi) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiii) 52.222-54, Employment Eligibility Verification (Aug 2013).

(xiv) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xvi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014)(Executive Order 13658).

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

Alternate I (Feb 2000). As prescribed in 12.301(b)(4)(i), delete paragraph (d) from the basic clause, redesignate paragraph (e) as paragraph (d), and revise the reference to “paragraphs (a), (b), (c), or (d) of this clause” in the redesignated paragraph (d) to read “paragraphs (a), (b), and (c) of this clause”.

Alternate II (Mar 2015). As prescribed in 12.301(b)(4)(ii), substitute the following paragraphs (d)(1) and (e)(1) for paragraphs (d)(1) and (e)(1) of the basic clause as follows:

(d)

(1) The Comptroller General of the United States, an appropriate Inspector General appointed under section 3 or 8G of the Inspector General Act of 1978 (5 U.S.C. App.), or an authorized representative of either of the foregoing officials shall have access to and right to—

(i) Examine any of the Contractor’s or any subcontractors’ records that pertain to, and involve transactions relating to, this contract; and

(ii) Interview any officer or employee regarding such transactions.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), and (c), of this clause, the Contractor is not required to flow down any FAR clause in a subcontract for commercial items, other than—

(i) Paragraph (d) of this clause. This paragraph flows down to all subcontracts, except the authority of the Inspector General under paragraph (d)(1)(ii) does not flow down; and

(ii) Those clauses listed in this paragraph (e)(1). Unless otherwise indicated below, the extent of the flow down shall be as required by the clause— http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/12.htm#P120_20051

(A) 52.203–13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

(B) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5).

(C) 52.219–8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C.

637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(D) 52.222–26, Equal Opportunity (Mar 2007) (E.O. 11246).

(E) 52.222–35, Equal Opportunity for Veterans (Jul 2010) (38 U.S.C. 4212).

(F) 52.222–36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(G) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(H) 52.222–41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(I) ____ (1) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C.

chapter 78 and E.O. 13627).

___ (2) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(J) 52.222–51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(K) 52.222–53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

(L) 52.222–54, Employment Eligibility Verification (Aug 2013).

(M) 52.226–6, Promoting Excess Food Donation to Nonprofit Organizations.

(May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph

(e) of FAR clause 52.226–6.

(N) 52.247–64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247–64.

(O) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) Executive Order 13658).

52.212-3 Offeror Representations and Certifications -- Commercial Items (MAR 2015)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared…