FY22-32504_SOW_06072022.pdf

Statement of Work For Surface to Surface Missile Module (SSMM) Shipping Container Mounting Hardware/Frames

FY22-32504

06/07/2022

I. SCOPE.

1.1 Naval Surface Warfare Center (NSWC), Port Hueneme Division requires quantity two (2) set of sets of mounting hardware/frames for Surface-to-Surface Missile Module (SSMM) Shipping Container Assemblies. The SSMM Shipping Container are used for the stowage and transport of SSMM in support of the Littoral Combat Ship (LCS) Surface Warfare (SUW) Mission Package (MP). The variety of mounting hardware/frames are used to safely secure the SSMM in the 3 SSMM shipping containers (Foundation Container Assembly (TA19055), Hatch and Cover Container Assembly (TA19057), and MECS Container Assembly

(TA19059)).

II. APPLICABLE DOCUMENTS

2.1 Department of Defense Drawings

2.1.1 SSMM Technical Drawings.

2.1.1.1 TA19055, Container Assembly, Foundation

2.1.1.2 TA16250, Service Panel Shipping Frame

2.1.1.3 TA16251, Service Panel Shipping Frame Weldment

2.1.1.4 TA16252, Cover, Service Pane; Shipping Frame

2.1.1.5 TA16253, Vibracon Tray

2.1.1.6 TA16254, Carrier, Superbolt

2.1.1.7 TA16255, Gauge, Vibracon Adjustment

2.1.1.8 TA16260, Foundation ISO Container, Uninterrupted Power Supply (UPS)

Support Frame Weldment 2.2

2.1.1.9 TA16261, Foundation ISO Container, UPS Support Frame Assembly 2.2

2.1.1.10 TA19057, Container Assembly, Hatch and Cover

2.1.1.11 TA19051, Shipping Assembly, Cover Hatch Half

2.1.1.12 TA19061, Shipping Frame Weldment, Storage

2.1.1.13 TA19052, Shipping Frame Assembly, Cover Half

2.1.1.14 TA19053, Shipping Frame Assembly, Storage

2.1.1.15 TA19054, Cover Shipping Frame Half Weldment

2.1.1.16 TA19061, Shipping Frame Weldment, Storage

2.1.1.17 TA19059, Container Assembly, Missile Exhaust Containment Structure

(MECS)

2.1.1.18 TA15093, MECS Bracket

2.1.1.19 TA15094, MECS Bracket Nut Plate

2.1.1.20 TA15095, MECS Bracket Shim

2.1.1.21 TA16200, MECS Transport Assembly

2.1.1.22 TA16201, MECS Shipping Frame Weldment

2.1.1.23 TA16202, MECS Shipping Frame Assembly

2.1.1.24 TA16030, Identification Plate EX-61 Mod 0

2.1.1.25 TA19062, Bracket, Shipping Frame

2.2 Department of Defense Standards.

2.2.1 MIL-DTL-24441/20B, Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type III

2.2.2 MIL-PRF-24635F, Coating System, Weather-Resistant, Exterior Use

2.2.3 MIL-STD-130N, Identification Marking of U.S. Military Property

2.2.4 FED-STD-595/23538, Yellow, Semigloss

2.2.5 MIL-DTL-5541F, Chemical Conversion Coatings on Aluminum and

Aluminum Alloys

2.2.6 GG-P-455B, Plates and Foils, Photographic (Photosensitive Anodized

Aluminum)

2.2.7 MIL-DTL-19834C, Plates, Identification or Instruction, Metal Foil, Adhesive

Backed General Specification for

2.2.8 MIL-STD-2073-1E, Standard Practice for Military Packaging

2.2.9 NAVSEA STANDARD ITEM 009-32, Cleaning and Painting Requirements;

accomplish

2.2.10 MIL-DTL-24441/29B, Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type IV

2.2.11 MIL-DTL-24441/30B, Paint, Epoxy-Polyamide, Haze Gray, Formula 151, Type IV

2.3 Non-Government Standards and Other Publications

2.3.1 ASTM B221, Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

2.3.2 ASTM B308, Aluminum-Alloy 6061-T6 Standard Structural Shapes

2.3.3 ASTM B209, Aluminum and Aluminum-Alloy Sheet and Plate

2.3.4 AWS D1.2, Aluminum – Structural Welding Code, Standard for

2.3.5 AWS D9.1, Sheet Metal Welding Code

2.3.6 SAE-AMS-QQ-A-200/8, Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and

Wire, Extruded

2.3.7 ASTM B211, Aluminum and Aluminum-Alloy Bar, Rod, and Wire

2.3.8 ASTM D4976, Polyethylene Plastics Molding and Extrusion Materials

2.3.9 ASTM A240, Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

2.3.10 ASTM D6100, Standard Specification for Extruded, Compression Molded and

Injection Molded Polyoxymethylene Shapes (POM)

2.3.11 ASTM A36, Steel, Structural, Carbon

2.3.12 ASTM A572/A992, Steel, High-Strength Low-Alloy Columbium-Vanadium

Structural

2.3.13 ASTM A500, Cold-Formed Welded and Seamless Carbon Steel Structural

Tubing in Rounds and Shapes

2.3.14 AWS D1.1, Steel-Structural Welding Code, Standard for

III. REQUIREMENTS

3.1 General Requirements

3.1.1 Upon contract award, the contractor shall proceed to produce quantity two (2) sets of SSMM Shipping Container mounting hardware/frames in accordance with ref. 2.1.1 SSMM Technical Drawings. A set of mounting hardware/frames for SSMM is consist of the following parts listed in Appendix 1: SSMM Shipping Container Mounting Hardware/Frames parts.

3.1.2 The Contractor shall produce one (1) set of SSMM Shipping Container mounting hardware/frames for First Article Testing (FAT). On satisfactory completion of the FAT, the contractor shall produce an additional quantity one

(1) set of SSMM Shipping Container mounting hardware/frames, for an overall production of quantity two (2) set of SSMM Shipping Container mounting hardware/frames.

3.1.3 The Contractor shall establish and maintain management operations that shall include the following areas:

3.1.3.1 Program Planning and Control

3.1.3.2 Subcontractor/Vendor Control, if utilized

3.1.3.3 Financial Management

3.1.3.4 Data Management

3.1.3.5 Management and Accountability for Government Furnished Information

3.1.3.6 Risk Management

3.1.4 If, during production, the contractor requires modifications to the specification or additional information, they will submit a request for change/information that also includes the drawings affected and the need for change/information to the Government. The vendor shall not proceed with any changes to the specification without written concurrence from the Government.

3.1.5 At the sole discretion of the Government, intermittent project status reviews may be conducted on an informal basis by telephone/teleconference, not to exceed one (1) hour per week.

3.2 Inspection and Acceptance

3.2.1 The Government shall conduct non-destructive performance tests on the First Article to demonstrate full compliance of the equipment and hardware parts included on the SSMM Shipping Container Mounting Hardware/Frames specifications in accordance with the approved First Article Test (FAT) Procedure. The manufactured parts must be within the tolerances specified on the drawings. The parts found not within tolerance are classified as faulty and may be deemed not acceptable at the sole discretion of the Government.

3.2.2 The Government shall conduct non-destructive acceptance test on the Second set of SSMM Shipping Container Mounting Hardware/Frames in accordance with the approved Production Acceptance Test (PAT) Procedure prior to shipping and acceptance by the Government.

3.2.3 The Contractor shall provide Government access to their facilities and provide assistance if requested, during FAT and PAT.

3.2.4 FAT and PAT are to take place at Contractor’s facility with participation by 2-3 Government personnel and not to exceed 2 days of testing

3.2.5 FAT and PAT procedures to be developed by the Government and will provide to contractor within 30 days of contract award.

3.3 Period of Performance/ Delivery Schedule

3.3.1 The contractor shall deliver items in accordance with the contract award terms.

3.3.2 The item shall be delivered to:

Naval Surface Warfare Center, Port Hueneme Division 4363 Missile Way Port Hueneme, CA 93043-4307

3.4 Government Points of Contact (POCs)

3.4.1 Technical POC: Christopher Wan, christopher.l.wan.civ@us.navy.mil, 805-394-9921

3.4.2 Alternate Technical POC: Antonio Luigi Cava / antonio.l.cava.civ@us.navy.mil 805-228-6374

3.4.3 Contracting POC: Brian Carpenter, brian.a.carpenter@us.navy.mil

Appendix 1: SSMM Shipping Container Mounting Hardware/Frames Parts per set

Legend:

Top level assemblies Not Required Custom items

Part # Nomenclature Qty per assembly Total Qty needed

MIL-PRF-907

Anti-seize, compound, high temperature

AR AR

TA19055

Container Assembly, Shipping, Foundation

TA19056 Shipping Container, Foundation 1

TA18001-19 Foundation Assembly 1

98180A160 Washer, flat (.625 NOM) 68 136

92147A035 Washer, lock (.625 NOM) 48 96

91286A442 Screw, cap, hex head

48 96 (.625-18 UNF x 2.500)

91286A111 Screw, cap, hex head

16 32 (.25-20 UNC x 1)

98180A110 Washer, flat (.250 NOM) 32 64

92147A029 Washer, split lock (.250 NOM) 16 32

93827A211 Nut, hex, .25-20 UNC 16 32

93827A255 Nut, hex, .625-18 UNF 20 40

TA16250 Shipping Frame, Service Panel 1 2

TA16251

Shipping Frame Weldment, Service Panel 1 2

90247A024 Helical insert (.375-24) 40 80

TA16252

Cover, Service Panel Shipping

Frame 1 2

TA16253 Vibracon Tray 2 4

TA16254 Carrier, Superbolt 2 4

TA16255 Gauge, Vibracon Adjustment 1 2

3014T146 Lifting eye, 3.00 LG shoulder

2 4

(.500-13 UNC)

91922A231 Washer (.500 NOM) 4 8

91475A033 Washer, split lock (.500 NOM) 2 4

94191A500 Nut, hex (.500-13 UNC) 2 4

91286A243 Screw, cap, hex head

8 16 (.375-24 UNC x 1.000)

98180A130 Washer, flat (.375 NOM) 8 16

91102A031 Washer, lock, split (.375 NOM) 8 16

1590A140 Latch 4 8

1435A41 Handle 2 4

91400A537 Screw, cap, pan head (.250-20

UNC x .500) 4 8

92141A029 Washer (.250 NOM) 4 8

92147A029 Washer, lock (.250 NOM) 4 8

97530A025 Solid rivet (.125 NOM) 16 32

TA19062-2 Bracket, Shipping Frame, Floor 3 6

TA19062-3 Bracket, Shipping Frame 5 10

TA16261

Foundation ISO Container, UPS

Support Frame Assy 2.2 1 2

TA16260

Foundation ISO container, UPS Support Frame Weldment 2.2

1 2

106510

Vibration Damping Tape, 3" wide x 9' long rolls, material: .075" thick HT-200, black, adhesive:

DP-1001 PSA 1 side

AR AR

TA19057

Container Assembly, ISO Hatch and Cover

TA19058 Shipping Container, Cover/Hatch 1

98180A160 Washer, flat (.625 NOM) 60 120

92147A035 Washer, lock (.625 NOM) 40 80

91286A442 Screw, cap, hex head

40 80 (.625-18 UNF x 2.500)

93827A255 Nut, hex, .625-18 UNF 20 40

TA19051

Shipping Assembly, Hatch and

Cover Half 1 2

TA16065-09 Cover Assembly, Half A 1

TA16065-19 Cover Assembly, Half B 1

93827A253 Nut, hex, .625-11 UNC 42 84

91286A410 Screw, cap, ultra-coated

42 84 (.625-11 UNC x 3.00 LG)

98180A160 Washer, flat (.625 NOM) 84 168

92147A035 Washer, lock (.625 NOM) 42 84

91286A325 Screw, cap, hex head

16 32 (.500-13 UNC x 2)

93827A245 Nut, hex, .500-13 UNC 16 32

92147A033 Washer, split lock (.500 NOM) 16 32

98180A150 Washer, flat (.500 NOM) 32 64

TA19052

Shipping Frame Assembly, Cover

Half 2 4

24413NS

Hoist ring, shackle-lok, w/o shackle 4 16

22455T19 Caster, swivel 8 32

91286A204 Screw, cap, hex head

32 128 (.375-16 UNC x 1.5)

91286A318 Screw, cap, hex head

8 32 (.500-13 UNC x 1.5)

92147A031 Washer, split lock (.375 NOM) 32 128

92147A033 Washer, split lock (.500 NOM) 8 32

93827A225 Nut, hex, .375-16 UNC 32 128

93827A259 Nut, hex, .750-10 UNC 4 16

98180A130 Washer, flat (.375 NOM) 64 256

98180A150 Washer, flat (.500 NOM) 8 32

98180A170 Washer, flat (.750 NOM) 4 16

TA19054-1

Shipping Frame Weldment, Cover

Half 1 4

TA19062-1 Bracket, Shipping Frame, Cover 2 8

TA19053

Shipping Frame Assembly, Storage 1 2

24413NS

Hoist ring, shackle-lok, w/o shackle 4 8

22455T19 Caster, swivel 8 16

91286A204 Screw, cap, hex head

32 64 (.375-16 UNC x 1.5)

92147A031 Washer, split lock (.375 NOM) 32 64

98180A130 Washer, flat (.375 NOM) 64 128

98180A170 Washer, flat (.750 NOM) 4 8

93827A225 Nut, hex, .375-16 UNC 32 64

93827A259 Nut, hex, .750-10 UNC 4 8

TA19061

Shipping Frame Weldment, Storage 1 2

TA16030-002 Identification Plate 1 2

TA19062-2 Bracket, Shipping Frame, Floor 10 20

TA19059 Container Assembly, MECS TA19060 Shipping Container, MECS 1

91286A442 Screw, cap, hex head

28 56 (.625-18 UNF x 2.500)

98180A160 Washer, flat (.625 NOM) 28 56

91102A035 Washer, lock, split (.625 NOM) 28 56

TA16200-001

MECS Transport Assembly

(empty) 2 4

TA15050-19

Missile Exhaust Containment

Structure, Assembly

TA16156-19

Cartridge, Guided Missile and

Launcher, MK 333 Mod 0

91286A464 Screw, cap, hex head

4 16 (.750-10 UNC x 3.000)

91247A036 Washer, split lock (.750 NOM) 4 16

98180A170 Washer, flat (.750 NOM) 4 16

TA16202 Shipping Frame, MECS 1 4

91286A462 Screw, cap, hex head

8 32 (.750-10 UNC x 2.500)

91247A036 Washer, split lock (.750 NOM) 8 32

98180A170 Washer, flat (.750 NOM) 8 32

TA16201

Shipping Frame Weldment, MECS

1 4

TA16030-001 Identification Plate 1 4

TA15093 MECS Bracket 4 16

TA15095 MECS Bracket, shim 8 32

TA15094 MECS Bracket, nut plate 4 16