Salient_Characteristics_Compact_Track_Loader.docx

Compact Track Loader w/ Forestry Head and General Purpose Bucket Salient Characteristics

Qty 1 of each Salient Characteristics must include:

Compact Track Loader Primary vehicle: (or equivalent to CAT 299D2 XHP)

· Model year of 2018 or newer.

· Engine: minimum 106 net hp TEIR 4 diesel engine with standard size fuel tank, fuel filter w/ water separator, 100 amp alternator, liquid cool.

· Two speed travel: Low Range minimum 5.2 mph and High Range minimum 8.4 mph hydrostatic drive.

· Hydraulic system: High flow-minimum 40gpm @ 4000 psi high flow pump. Standard flow-minimum 23 gpm @ 3300 psi.

· Loader arm style with minimum 155” lift

· Undercarriage: Steel imbed rubber track with standard construction block tread, minimum width 15.7”, with triple flange front and rear idlers.

· Equipment protection package to include at a minimum: debris protection kit, debris guarding kit, speed sensor harness protection kit, engine air intake pre-cleaner kit, turbo debris kit, auxiliary hydraulic cooler kit, on demand and reversing fan.

· External counterweights minimum: 250lbs.

· Cab: high back seat w/ air suspension, LCD display for in-cab control and monitoring functions, emergency shutdown switch, climate control A/C and heater, rear view camera, polycarbonate cab door, 3 inch seat belt, tilt up cab, window wiper and ROPS and FOPS certified.

· Cold climate package to include: 120 volt engine block heater.

· Manual quick coupler.

· Operator’s manual, parts manual, and service manual in English.

Brush Mulcher attachment: (or equivalent to Diamond Skid Steer Forestry Head)

· Must be compatible with primary vehicle requirements: minimum 40 gpm @ 4000 psi, door window on primary vehicle with polycarbonate guard, manual coupler, must be able to attach to primary vehicle listed in this solicitation, and debris barrier kit.

· Minimum cutting width: 60 inches, hydraulic motor rated at a minimum 133 hp, cutting head constructed of solid 1” steel disk, cutting disk spindle diameter: minimum of 6.5” and length: minimum of 13”, skid-steer hydraulic system will supply oil to forestry head.

· Minimum number of fixed teeth: 47 replaceable teeth to include three mounted to the frame, bolt protector and center mounted cutter.

· Chute designed for either straight stemmed hardwoods or bushy material.

General Purpose Bucket attachment: (or equivalent to GP Bucket BOCE 84”)

· Must be compatible with primary vehicle requirements: must be able to attach to primary vehicle listed in this solicitation.

· Rated bucket capacity: minimum 0.82 cyd, minimum 84” wide, 1 piece bolt-on cutting edge.