Anti-fatigue sub-flooring spec summary

Optimized Anti-fatigue Sub-Flooring Specification (SmartCells Design)

1. Smooth surface supported by unstable, buckling tubular structure

2. Elastic modulus 06.-0.9 MPa

3. Durometer of 50 (shore A scale)

4. Resilience of 23%

5. Shock reduction of 39% (DIN)

6. ‘Bottoming out’ depth of 15 mm

7. 25 mm nominal thickness

8. Instantaneous rebound of shock absorbing tubes in-phase with work activity

9. Stress-compressibility curve with a negative slope (softens as compressed)

10. Supports rolling loads (up to 100 pound point rolling load per wheel on an 8”x1.5” wheel or equivalent)

11. Eight year manufacturer’s warranty

12. Sealed surface to prevent fluid penetration into cushioning element

13. ‘Built-in’, optimized anti-fatigue design, eliminating need for additional surface mats

14. Reconfigurable modular tiles

15. Floating floor / loose-lay design, eliminating need to glue down

16. Ability to cover with commercial floor coverings with releasable adhesive to enable changing of wear layer as needed (e.g. Nora Sheet Rubber, Carpet tile)