Attachment_2,_Specifications_and_Drawings.PDF
PDF 253 KB Posted
- Attached to
- Sheet Metal Finisher Federal contract opportunity
- Solicitation number
- FE461018215001
About this file
Attachment 2, Specifications and Drawings
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment_1,_RFQ.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SHEETMETAL FINISHER
Salient Characteristics/Requirements
Timesavers, Model 2211-23-0 or equivalent to.
1) Max stock width: 36” Equal to or Greater than.
2) Min part length: 9” Equal to or Greater than.
3) Abrasive belt size: 37” x 75” Equal to or Greater than.
4) Machine opening: 0-5” Equal to or Greater than.
5) Feed speed: 15-45FPM Equal to or Greater than.
6) Electrical input: 230 VAC 3 Phase Equal to.
7) Full load amps: 66
8) Motor power: 20 HP Equal to or Greater than.
9) 6” Diameter contact drum. Equal to or Greater than.
10) Precision balanced abrasive head and feed drive motors. Equal to or Greater than.
11) Infeed stop bar for emergency stop. Equal to or Greater than.
12) Dual infeed and dual outfeed hold own rolls. Equal to or Greater than.
13) Air operated disc brake for belt stoppage. Equal to or Greater than.
14) Centralized control panel Equal to or Greater than.
15) Dial indicators on adjustable drum head. Equal to or Greater than.
16) Quick release outboard support. Equal to or Greater than.
17) Main motor load meter. Equal to.
18) Hour meter. Equal to.
19) Programmable storage of machine settings (up to 10) Equal to or Greater than.
20) Variable speed conveyer drive Equal to or Greater than.
21) Electronic photo-eye abrasive belt tracking. Equal to or Greater than.
22) PWDC-F5 5 HP portable wet type dust collector. Equal to or Greater than.
23) Labor and expenses for technician to train personnel in operation and maintenance of machine. Equal to.
24) Duct package to connect abrasive machine to dust collector. Equal to or Greater than.
Notes:
6" (150mm) O.D.
1000 CFM (1700 M /H)
AT 5" WATER COLUMN
TOTAL DUST COLLECTION
SYSTEM CAPACITY REQ'D:
1000 CFM (1700 M /H)
AT 5" WATER COLUMN
2087.2 82.17
35.59
25.98
982.3 38.67
131.1 5.16
19.88
23.47
1059.1 41.70
76.8 STUBS
3.02
CLEAN-OUT SCOOP
31.73
907.9 35.74
1" NPTF DRAIN VALVE
5/8" STRAIGHT THRD
FILL VALVE INLET
203.2 DUST INLET
8.00
12.99
25.98
1.89
22.05
29.53
(4) 12 HOLES FOR
ANCHOR BOLTS
1.10
TOP EXHAUST OPENING
SCALE:
SHEET
OF
REV.
TOLERANCES +/- UNLESS
OTHERWISE SPECIFIED
MATERIAL:
DRAWN
DECIMAL
ANGLE
.5, .12 3
DATE
JAH
1:8
30256101 1
4-07-08
WDC-5 ASSY
DIMENSIONAL
MACHINING WELDING FABRICATING FINISH REQUIREMENTS USED ON REFERENCE MACHINE/DRAWING:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF TIMESAVERS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF TIMESAVERS, INC. IS PROHIBITED.
NAME
CHECKED
D
UNITS:
SOLIDS (Y/N):
MM
Y
DRAWING NUMBER:TITLE:
SIZE:
| Attachment 2 Model 2211-23-0 dimensional.pdf |
| Untitled |
| Attachment 3 WDC-5.pdf |
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View4 |
File details come from the government source that posted it.