155_ton_Mobile_Chiller_Specifications1.pdf

Trailer Specification for a Mobile Chiller Brand Name or Equal to: BigTex Trailers, model 25GN-40. The minimum specification of the BigTex model above are listed below.

It is required to have 16 inch tires and a non-adjustable axle. This should be a 40 foot long, kingpin trailer with a 102 inch width. This specification is for the TRAILER ONLY. The below drawing illustrates how the trailer will be set up once it is received.

Figure 1, Trailer Specifications

25GN-40 8,750# 102" x 40' Tandem Dual Wheel Gooseneck (Straight)

AXLE (2) 12,000# Dual Wheel w/ Electric Brakes (Oil Bath)

JACK Dual Two Speed Landing Gear (Bolted On)

NECK 12" I-Beam, 19#

TIRE ST235/80 R-16 Load Range E Dual

FLOOR 2" Treated Pine or Douglas Fir*

FRAME 12" I-Beam, 19#

WHEEL 16" x 6"; Black Dual Wheel 8 Bolt

FINISH

Superior Quality Finish is Applied for a Highly Decorative and Protective Finish.

LIGHTS L.E.D. D.O.T. Stop, Tail, Turn & Clearance

COUPLER 2-5/16" Ball Adj. Square Crank Type

DOVETAIL

5 Cleated Dovetail w/5 Double Hinged, Spring-Assisted Flip-Over Ramps

G.V.W.R. 25,900#

ELEC. PLUG 7-Way RV

HITCH TYPE Kingpin

Trailer Specification for a Mobile Chiller

SIDE RAILS

8" Channel w/Rub Rail, Stake Pockets on 24" Centers, and Chain Spools

SUSPENSION Heavy Duty 30,000# Adjustable

CROSSMEMBERS 3" Channel

FINISH (Prep) Steel is Cleaned to Ensure a Professional Smooth Finish.

SAFETY CHAINS 3/8" Grd. 70 w/Safety Latch Hook (2 each)

G.A.W.R. (Ea.

Axle)

12,000#

CHILLER REQUIREMENTS

FOR ABOVE MOBILE TRAILER

The Chiller must meet the following minimum requirements: (Brand Name or Equal to Trane)

155 Ton Trane Chiller / 500 GPM—or equivalent Integral Hydronic Piping Package o 5” Sized Schedule 40 Welded Steel piping o (2) 25 HP Armstrong Pumps (Lead/Lag Control) o (2) TR150 VFD for Balancing o 500 GPM / 100 feet head / Glycol o Isolation Valves o Triple Duty Valve o Suction Diffuser w/ Strainer o ASME Air Separator o Non-ASME Expansion Tank o Pressure and Temperature Gauges

Portable Unit Modification o Camlock Electrical Connectors o Set of flexible hoses w/ hose reels (200’) o Mounted to Trailer (bolted)

Standalone Controls

Freight to Building 20683

2050 Wyoming Blvd, SE Bldg. 20683 Kirtland AFB, NM 87117

Unit must be fully functional upon arrival. The Government will inspect and test the unit after it’s been received.

The Chiller package will be mounted on the Brand Name or Equal to: Big Tex Trailer, model 25GN-40 as indicated in Figure 1, previous page.