FY 20 - SSJ HG 9900 - R_Redacted.pdf

PDF 107 KB Posted

Attached to
HG9900 IMU Federal contract opportunity
Solicitation number
FA9302-20-Q-1002
Issued by
Department of the Air Force Materiel Command Test Center

View the file

Other files for this federal contract opportunity

Other files attached to HG9900 IMU, newest first.
File Type Posted
RFQ.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Single Source Justification (Simplified Acquisition)

FOR OFFICIAL USE ONLY

November 2018 FOR OFFICIAL USE ONLY Page 1 of 2

Section A: General Contract Information

Is this a Bridge Action as defined in the AF Bridge Action Reduction Plan? Yes No

Contracting Activity: AFTC/PZIEA

Project/Program Name:

Purchase Request / Local ID Number: F1S0AF9345A001

Estimated Contract Cost (including Options):

Section B: Description of the Supplies/Services Required

1 each HG9900C1A-2020, HG9900 Inertial Measurement Unit (IMU), this IMU equipment is mission critical, and will support existing and future . It has a high accuracy sensor data that supports flight test missions at other programs of .

Section C: Justification for Soliciting from a Single Source or Brand Name

The unit that we are procuring will be used with the existing units that are currently being used in programs; e.g., programs. Because this unit is supporting legacy programs, it needs to be compatible with existing products. It needs to meet exact form, fit and function with existing products. Previous acquisitions were: FA9302-18-P-F010 and FA9302-19-P-1035.

The HG 9900 has an operating range of +/- 20g. It outputs two (2) message types: Message 3 and Message 4. Message 3 contains the TSPI and BIT information and is output at 300 Hz continuously. Message 4 contains unit information such as serial number, BIT and temperature. Message 4 is output at power up 10 times and then is suppressed. All data is output in SDLC format with a fixed address field. These are unique qualifications that no other known companies can currently meet and support.

Additionally, the multi-sensor optimal smoother estimation software (MOSES) post mission processing (PMP) tool can only process data from TSPI and systems using the Honeywell IMU units. The CRIIS TSPI system was developed by Test and Resource Management Center (TRMC) and is mandated by the Air Force as the next generation enterprise TSPI solution.

To replace or upgrade existing form, fit IMUs would require, not only identifying flight testing and replacing most units on at but would require a modification to the existing post mission processing software at a cost of greater than to identify and test new IMU units and would also take more than one year to upgrade the current software used. The duplicate cost could not be recovered through competition. The programs and TSPI team are seeking standardization of these test units in order to save time and man hours in training and cross-utilization across the AFTC test ranges.

These are unique qualifications that no other known companies can currently meet and support.

Section D: Efforts to Obtain Competition

Market research was performed by consulting knowledgeable individuals, both in government and other industries regarding the capabilities to meet the government's requirements. Research was conducted in the Institute of Navigation (ION) and at the RCC Electronic Trajectory Measurements Group (ETMG) communities.

Searched GSA Advantage, visited other sites where similar products were in use, questioned users of similar equipment purchased recently, used search engines including google.com, and contacted base supply and determined that these part numbers are not loaded or available through existing Air Force Inventory. Honeywell was contacted directly for more specific

1273483353C Sticky Note Cancelled set by 1273483353C

Single Source Justification (Simplified Acquisition)

FOR OFFICIAL USE ONLY

November 2018 FOR OFFICIAL USE ONLY Page 2 of 2 information regarding the availability of the equipment, ability to provide a quote directly, and for a list of authorized resellers.

Honeywell does not have authorized distributors.

Section E: Steps to Preclude Future Single Source or Brand Name Awards

We will continually perform our market research by attending various conferences, e.g., International Telemetring Conference (ITC) and International Engineering Association (ITEA). We will continue discussions with other engineering communities in other agencies inquiring about other acquisitions of same and similar products.

Section F: Contracting Officer's Determination

I have determined, in accordance with FAR 13.106-1(b)(1), that the circumstances of this contract action deem only a single source is reasonably available.

Date

21-Jan-2020

Typed Name and Rank/Grade of Contracting Officer

Jenna A. Jacobson, NH-03, Contracting Officer

Signature of Contracting Officer

File details come from the government source that posted it. Updated .