Statement_of_Work-CHSHR_(Lens_and_Cameras)_UPDATED.pdf

CHSHR FY17 REQUIREMENTS

STATEMENT OF WORK (SOW)

FOR

846TH TEST SQUADRON AT HOLLOMAN AFB, NEW MEXICO

1.0 BACKGROUND/INTRODUCTION

The Combined High-Speed/High Resolution (CHSHR) EO/IR Imaging Improvement and Modernization Program is a joint effort between the 704th Test Group (Holloman AFB), and the 96th Range Group (Eglin AFB). The intent of the program is to improve and modernize precision measurement and Time-Space-Position-Information (TSPI) capabilities. Optical instrumentation operated and maintained by the Eglin Test and Training Center (ETTC), and the Holloman High Speed Test Track (HHSTT) include fixed and tracking imaging systems in both film-based and electronic configurations. In the last few years the wet film has been fully replaced with digital video capability at the HHSTT. Optical instrumentation provides the means by which we track and visually capture the behavior of a static or dynamic test item for precision measurement and reduction of specific data essential to the test mission.

2.0 SCOPE

The contractor shall deliver camera and lens equipment capable of meeting the requirements listed in section 3.0. These lens and equipment should be compatible with existing cameras already purchased by the 846 TS.

3.0 REQUIREMENTS

Provide the following equipment:

I. Four (4): 24-85mm f/2.8-4D IF Lens

a. Suggested part number: Nikon #1929

i. Zoom: 24mm-85mm

ii. F-stop: f/2.8-4

iii. Lens mount: Nikon F mount

b. Suggested Source: B&H Photo video #NI248528DAF

II. Four (4): 70-200mm zoom lens

a. Suggested part number: Sigma #589306

i. 70-200mm zoom lens

ii. Nikon mount

iii. Manual focus, Manual IRIS, Manual zoom

b. Suggested Source: B&H Photo video #SI7020028NI

III. Eight (8): 120-300mm zoom lens

a. Suggested part number: Sigma #137306 (120-300mm zoom lens)

i. Nikon mount

ii. Manual focus, Manual IRIS, Manual zoom

b. Suggested Source: B&H Photo video #SI120300N

IV. Six (6): 135mm fixed focal length C-mount lens

a. Suggested part number: AstroScope #908000

i. 135mm fixed f/2.8 C-mount lens with no IR coating

ii. C-mount

b. Suggested source: B&H Photo Video #ASL135F28CM

V. Six (6): 75mm fixed focal length C-mount lens

a. Suggested part number: AstroScope #914029

i. 75mm fixed f/1.4 C-Mount lens with no IR coating

ii. C-mount

b. Suggested source: B&H Photo Video #ASL75F14CM

VI. Six (6): 8.5mm C-mount lens

a. Suggested part number: Computar #M8513

i. Fixed focal length, 8.5mm

ii. C-mount

iii. F-stop: f/1.3

iv. For 2/3” CCD

b. Suggested source: B&H Photo Video #COM8513

VII. Six (6): 12.5mm fixed focal length C-mount lens

a. Suggested part number: Fujinon HF12.5HA-1B

i. 12.5mm fixed focal length

ii. C-mount

iii. F-stop: f/1.4

iv. For 2/3” CCD

b. Suggested source: B&H Photo Video #FUHF125HA1B

VIII. Six (6): 100-400mm lens

a. Suggested part number: Canon #9524B002

i. 100-400mm f/4.5-5.6L IS II USM lens

ii. EF Mount L-series lens

iii. One fluorite and one super UD element

b. Suggested source: B&H photo video #CA1004002LIS

IX. Six (6): Extender EF 1.4X

a. Suggested part number: Canon #4409B002

i. 1.4X lens extender

ii. EF Mount teleconverter

iii. 1.4Xmagnification factor

iv. Minimum of 2 stops of light loss

v. Communication between lens and camera

b. Suggested source: B&H Photo Video #CA14XEF3

X. Five (5): 300mm lens

a. Suggested part number: Nikon #2186

i. Focal length of 300mm

ii. Maximum aperture of f/2.8; minimum aperture of f/22

iii. Vibration Reduction Image Stabilization

iv. Nikon F-Bayonet mount

b. Suggested source: B&H Photo Video #NI20028GAFSL

XI. One (1): 18.5” HD/SD LCD monitor

a. Suggested part number: Panasonic #BTLH1850PJ (HD/SD LCD monitor)

i. 1366 x 768 production monitor

ii. SDI and HDMI Connections

iii. Vectorscope/Pixel-to-Pixel

iv. Color Audio level meter

v. Aspect Ration of: 16:9

vi. 18.5” Display

vii. Viewing angle: 160 degrees vertical

b. Suggested source: B&H Photo Video #PABTLH1850

XII. Four (4) Design Production Cameras

a. Suggested part number: Blackmagic #CINEURAS4K/PL

i. 3840 x 2160p Global Shutter CMOS Sensor

ii. 12 stops of dynamic range

iii. 12G-SDI output for 10-bit 4:2:2 4K

iv. 2x XLR Audio Inputs with Phantom Power

XIII. Six (6) 2.4MP Camera

a. Suggested part number: Marshall #CV343-CSB

i. Sensor: minimum of 2.5 MP, 1/3” CMOS sensor

ii. Minimum 1080p (1920x1080) at 59.94 FPS

iii. Must have global shutter

iv. C Mount

v. 3F-SDI/composite output

vi. Shutter speed: 1/30 to 1/30,000 sec

b. Suggested Source: B&H Photo Video #MACV343CSB

XIV. Four (4) Video recorder with 64GB Cfast card

a. Suggested part number: Atomos# ATOMNJS001-64

i. Minimum 64GB of memory with removable cfast card

ii. Recording resolution: minimum of 1080p at 10bit 4:2:2

iii. Input: HDMI

b. Suggested Source: B&H Photo Video #ATNIS64

XV. One (1) Video recorder with monitor

a. Suggested part number: Atomos # ATOMSHSTU01

i. Recording resolution: minimum of 4K video at 30FPS at 10-bit 4:2:2

ii. Input/output: 12G-SDI, HDMI

iii. Monitor: Attached 7: monitor

iv. Monitor resolution: 1920x1080 with touch screen

b. Suggested Source: B&H Photo Video #ATOMSHSTU01

XVI. Four (4) 24TB TeraStation

a. Suggested part number: Buffalo #TS5400DN2404

i. Minimum storage: 4, 6TB 3.5” NAS hard drives

ii. Raid configuration capabilities: Raid 0, 1, 5, 6, 10, and JBOD

iii. Minimum processing: 1.86GHz Intel Atom D2550 Dual Core Processor

b. Suggested source: B&H Photo Video #BUTS54OODN24

4.0 SCHEDULE/DELIVERABLES

Equipment is needed by: 30 days after contract award

5.0 BASE SUPPORT

No base support is needed/provided for this effort.

6.0 LOCATION AND WORK HOURS

Equipment is to be delivered to the LMCA during the hours of 0700-1600 Monday to Friday. Address for the LMCA is:

Attn: Jose Fantauzzi 1656 Vandergrift Road Bldg 1260 Holloman AFB, NM 88330