Attachment_A_18_Nov_16_Amendment.pdf
PDF 185 KB Posted
- Attached to
- Hydraulic Crane Federal contract opportunity
- Solicitation number
- FA9101-17-P-0005
About this file
Amendment to Attachment A of the Statement of Work
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions_and_Answers_18_Nov_16.pdf | ||
| New_Mobile_Crane_SOW_7_Nov_2016_complete.pdf | ||
| New_Mobile_Crane_SOW_20_Oct_2016_complete.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Notes:
1. Blocks marked "Motor" on is what is being lifted. The motors are identical and each motor weight is
137,000 lbs. The lift point or center of gravity of the motors is the center of the motor .
2. Motor dimensions: L= 23'-2 1/8", W= 9'-8 1/8" and H= 7'-3 1/2". Motor length shown is motor housing.
3. All obstruction heights are equal to or less than the motor height. There are no overhead obstructions.
4. There is no maximum load bearing pressure for the site.
5. Lift specified in 3.2.1 is expected to swing 360 degrees within the constraints on this sheet.
6. The right side of this sketch is not a wall, but there are various obstructions that will not allow the crane to pull any further into the area.
7. The 32.3 ft. dimension is the center to center measurement of the open area between obstructions were an outrigger can be placed.
8. There is no elevation changes.
9. The crane can be re-positioned to perform each motor lift. Once the motor is lifted, it is loaded on a truck at that same radius.
6’4”
12’11”
15’1”
9’8”
5’2”
5’10”
Attachment A
File details come from the government source that posted it. Updated .