Plate_Carriers_SOW_1_Aug_2017.pdf

Statement of Work (SOW)

Wright-Patterson Air Force Base (WPAFB)

T3 Geronimo 2 Plate Carriers w/ Soft Armor Inserts or Equal

1 August 2017

1.0 TASK

1.1. Contractor shall deliver a quantity of 350 T3 Geronimo 2 Plate Carriers with Quad Release System and soft armor inserts (T3-G2QRS) or equal to 88 Security Forces located at Wright Patterson Air Force Base. Each plate carrier must possess the following salient characteristics:

Color: ABU

Shall include a front, back and side soft armor that are compliant with NIJ Standard-0101.06 Level IIIA.

Shall be capable holding NIJ Standard-0101.06 Level IV plates as well as 8 inch side plates.

Shall have a Quick Release System. System must ensure instant release of carrier so that lifesaving medical treatment can be performed immediately without delay of individually removing clasp and harness systems.

1.2. The required quantity for each size are:

Extra Small (XS) – Quantity 20 – T3-G2QRS-XS-ABU or Equal

Small (S) – Quantity 100 – T3-G2QRS-SM-ABU or Equal

Medium (M) – Quantity 170 – T3-G2QRS-MD-ABU or Equal

Large (L) – Quantity 55 – T3-G2QRS-LG-ABU or Equal

Extra Large (XL) – Quantity 5 – T3-G2QRS-XL-ABU or Equal

2.0 POINTS OF CONTACT

A. Primary: Matthew Cormier (937) 257-3835 88 SFS/S4L B. Alternate: Scott A. Abbott (937) 257-8606 88 SFS/CCR

3.0 DELIVERY

3.1. Contractor shall ensure all materials are delivered to Wright Patterson Air Force Base within 120 days of contract award. The items will be delivered to:

88SFS/S4

2586 Newark Street, Bldg. 295 Wright-Patterson AFB, OH 45433

3.2. Contractor’s delivery hours shall be restricted to normal SFS operating hours from Mon-Fri 0730-1630. Due to 2017 federal holidays and installation family days the contractor shall not work the following listed below:

23-26 November 25-26 December

4.0 DELIVERY PROCEDURES COMMERCIAL VEHICLES

All vehicles larger than a large pick-up truck are required to be inspected by the Wright- Patterson Air Force Base Commercial Vehicle Delivery Gate (CVDG) prior to entering the installation. Vehicles to be inspected include, but are not limited to, the following:

1. Step van/panel truck

2. Tractor/trailer, box, and flatbed containing cargo

3. Tanker trucks

4. Box Trucks

5. Tour buses

6. Garbage/recycled waste trucks

7. Concrete trucks/mixers, dump trucks

8. Cranes, recreational vehicles, petroleum tanker

This inspection will be conducted at Gate 16A located off State Route 444.

The following are exceptions to vehicles utilizing the CVDG:

1. If the vehicle has the product inside (concrete and asphalt trucks) and timely delivery is necessary due to product deterioration it does not need to enter the CVDG. To bypass the CVDG, the contractor shall submit a list containing drivers’ names, social security numbers and the state in which the driver's license is held for those drivers who will be entering the base. This shall be accomplished 24 hours prior to requested entry time. If entry is requested on Monday, this list must be submitted by Friday at 1630 hours. All lists shall be submitted to the 88th ABW/CE Directorate contract inspector. The only gates that may be used under this exemption shall be 15A, 26A, 38A, and gate 1B. If the driver's name is not on the list, he/she will not be allowed access to the installation through these gates and the base will not assume liability for denied access.

2. If a delivery vehicle must exit, and then re-enter the base to complete its route, the vehicle shall be resealed upon exiting the base. After initially passing through the commercial vehicle delivery gate, trucks shall be resealed at Gates 15A, 38A and 22B. The resealing of the trucks will allow them to continue to any other area of the installation (Areas A, B, or Kittyhawk) without reprocessing through the CVDG. To receive resealing assistance, the drivers shall physically stop at one of the three authorized gates and request the installation entry controller to reseal their truck and provide the next location of their delivery. The controller will reseal the truck and give the delivery driver a pre-clearance form. The driver shall present the pre-clearance form to the entry controller at the next point of installation entry. This reentry can be through any base gate.

3. Wright Patterson Integrated Defense Plan, paragraph 3.10.12.9.2. All irregular deliveries will be sent to the CVDG for inspection. All visitors, which include contractors and commercial vendors without proper background checks and contractor passes, will not be allowed on WPAFB unless escorted by the receiving agency. This will take place after the individual(s) are issued a pre-clearance form at the CVDG. After successful completion of the vehicle inspection, the receiving agency will escort the individual to and from their destination on WPAFB. An inspector at the CVDG will contact the receiving agency, informing them to send an escort to the CVDG. Escorts will remain with the vehicle at all times while it is on WPAFB.

4. Vehicles may be subject to an inspection at any of installation entry control points during a directed random antiterrorism measure (RAM.) Any commercial vehicle, regardless of size, can be directed to the CVDG at the discretion of the installation entry controller.