Attachment_1_-_FAME_Testing_Instrument_Specifications.docx

FA8601-15-R-0108

Attachment 1 21 Jul 15 FAME Testing Instrument Specifications Brand Name or Equal The following is a list of requirements for purchase of a Seta FIJI Fame in Jet Instrument (Brand Name or Equal). This instrument will be used to test for Fatty Acid Methyl Esters (FAME) Content in Aviation Turbine Fuel at the Air Force Petroleum Agency’s Aerospace Fuels Laboratories.

· This instrument must fully comply with ASTM D7797-12 test methodology for the determination of FAME content in Aviation Turbine Fuel.

· Must comply with ASTM D7797-12 concentration range of 150 mg/kg to 500 mg/kg and below 20 mg/kg

· Must comply with ASTM D7797-12 precision and bias requirements

· The instrument must be fully automated with no pre-sample preparation required

· Measure range must be down to 10mmg/kg to 150mg/kg

· Must detect all FAME components, with peak IR absorbance at approximately 1749 cm-1 and C8 to C22 molecules, as specified in standards such as Specification D6751 and EN 14214.

· The instrument must be a stand-alone unit that does not require any external gases for sample analysis.

· Brand Name or Equal:

· Five (5) FAME in Jet Fuel Testing Instruments, P/N: SA5000-2

· Five (5) Start Up Kits, P/N: SA5001-0

· Low Lint Wipes (Box 280), P/N: SA5003-0

· Beaker 50 mL (100), P/N: SA5004-1000

· Cartridge (100), PN: SA5005-100

· Verification Fluid, 30 mg/kg, 100 mL, P/N: SA5020-0

· Verification Fluid, 100 mg/kg, 100 mL, P/N: SA5021-0 Note: A copy of ASTM D7797-12, EN 14214 and ASTM D6751 may be obtained by writing; ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959; by telephone at 610-832-9255; by e-mail at service@astm.org; or through the ASTM website at www.astm.org