Attachment 1 SOW.pdf

AIR FORCE LIFE CYCLE MANAGEMENT CENTER

ROBINS AIR FORCE BASE, GEORGIA 31098-1670

STATEMENT of WORK (SOW)

FOR

HH-60G Position Lights

FD2060-20-30315

PR Number

07 Jan 20 Date

Prepared by:

AFLCMC/WIUBB

235 Byron Street, Suite 19A Robins AFB, GA 31098-1670

DISTRIBUTION STATEMENT C: Distribution authorized to U.S. Government agencies and their contractors (Administrative or Operational Use; 17-08-21). Other requests for this document shall be referred to AFLCMC/WIUBB, Robins AFB, GA 31098-1670.

TABLE OF CONTENTS

SECTION TITLE PAGE

SECTION 1 DESCRIPTION OF SERVICES 3

SECTION 2 TECHNICAL REQUIREMENTS 3

SECTION 3 GENERAL INFORMATION 4

SECTION 4 APPENDICES 5

1.0 Description of Services

1.1 Objective(s): This Statement of Work (SOW) describes the level of effort required to procure replacement kits for the Position lights currently installed on the legacy HH-60G Helicopter. These services include the procurement of Position Lights kits, manufacture of all required piece parts and the kitting of these parts to support the legacy HH-60G Helicopters. All work performed under this SOW will be In Accordance With (IAW) the publications, technical manuals and specifications identified herein. All activities/services shall be under the guidance of Government personnel. The Contractor shall furnish all necessary labor, supervision, equipment, tools, materiel, consumable supplies and facilities, except as otherwise noted herein.

1.2 Background: The current Position Lights are unsupported with backorders and the assemblies remaining in supply will be exhausted without a replacement. Consequently, the units are cannibalizing depot aircraft due to the non- availability of parts in supply to maintain aircraft availability. Therefore, as a result of the HH-60G Position Lights becoming obsolete and are no longer available for procurement, the program office requirement for this effort consisted of identifying a source to supply a non-developmental, qualified, in production replacement lighting system.

2.0 Technical Requirements

2.1 Period and Place of Performance:

2.1.1 Contract/Order Period of Performance: The period of performance for the contract/order will extend 18 months.

2.1.2 Place of Performance: The performance will occur at Contractor's facility.

2.1.3 Requirement in Detail:

2.1.3.1 The Contractor shall furnish to the Government complete, Position Light kits for the HH-60G Helicopter in accordance with the required kits/parts/ and material identified in Time Compliance Technical Order 1H-60-1084. The required kits/parts/ and material are also identified in the attachment titled TCTO 1H-60-1084 Mod kit.

2.1.3.2 The Contractor shall assemble the Light Emitting Diode Position Lights kits per the drawing furnished by HH-60G Program Office.

2.1.3.3 See paragraph 5.2, Appendix B, Kit Content List.

2.1.3.4 See paragraph 5.3, Appendix C, Spares Content List.

2.1.3.5 The Contractor shall provide Monthly Status Report by the 15th of every month. If the 15th falls on a holiday/weekend, the report is due the next business day. The Government will review and approve or disapprove within five (5) working days. The Contractor shall incorporate comments and resubmit within five (5) business days after receipt of Government comments.

(CDRL A001, DI-MGMT-80368A)

2.2 Packaging:

The Contractor shall package and mark material in accordance with the basic contract in accordance with the attached Air Force Materiel Command (AFMC) Form 158, Packaging Requirements. The Contractor shall package and mark material in accordance with other applicable Government regulations including, but not limited to, those regarding security, safety and environmental concerns.

The Contractor shall package and mark material for movement, shipment, receipt and storage in a manner that ensures the protection and preservation of the material for shipment to and storage at the destination.

In accordance with MIL-STD-2073-1E, Standard Practice for Military Packaging, shipping containers received, which meet the requirements of the AFMC Form 158 and are suitable for return shipment of serviceable assets, shall be reclaimed and stored for reutilization. Unsuitable shipping containers shall be disposed of and replaced with new containers that meet the requirements of the AFMC Form 158.

3.0 General Information:

3.1 Continuation of Mission-Essential Services During a Crisis:

The Functional Commander (FC) or civilian equivalent has determined these services are not mission-essential and services will not continue in the event of a crisis.

3.2 Environmental Management System (EMS):

3.2.1 Services will be performed at the Contractor’s facility; therefore, the EMS requirement does not apply to this effort, but this statement does not exempt the Contractor from any other Federal, State or local statute or requirement.

3.3 Agency Affirmative Procurement Programs: This acquisition does not require the purchase of Environmental Protection Agency (EPA)-designated products or United States Department of Agriculture (USDA)-designated products; therefore, the requirement does not apply.

3.4 Safety Requirements:

3.4.1 Contractor Compliance:

The Contractor shall comply with Government Safety and Health regulations including, Public Law 91-596 as amended by Public Law 101-552 [Occupational Safety and Health Act of 1970 (OSHA)] and DoDD 4715.1E, Environment, Safety, and Occupational Health (ESOH).

3.4.2 Invoicing/Payment and Receipt/Acceptance: The Contractor shall submit/process payment requests and receipt/acceptance documents via Wide Area Workflow.

4.0 Trafficking in Persons: The Contractor shall comply in accordance with the FAR and applicable supplements and shall be in compliance with all applicable guidance and clauses listed in the contract as it relates to Trafficking in Persons. Additional information about Trafficking in Persons is available at the site for the Department of State’s Office to Monitor and Combat Trafficking in Persons. http://www.state.gov/j/tip

5.0 Appendices

5.1 Appendix A: References

Publication Title of Publication Date of Publication Section(s) That Apply AFMC Form 158 Packaging Requirements April 24, 2015 2.2 Public Law 91-596 as amended by Public Law 101-552

Occupational Safety and Health Act of 1970

December 29, 1970 as amended through January 1, 2004

3.4.1

Time Compliance Technical Order 1H-60-

Position Lights TBD 2.1.3.1

5.2 Appendix B: Kit Content List

Light mounting parts kit:

Item PN Nomenclature Per Kit (each)

Total for Kits

Total required

1 003128-05 Doubler 2 200 200

2 003129-05 Tail Light Mounting Adapter

1 100 100

3 003130-15 Fairing (must have nutplates installed)

1 100 100

4 003130-16 Fairing (must have nutplates installed)

1 100 100

5 003603-05 Light Block, Right 1 100 100

6 003603-07 Light Block, Left 1 100 100

7 201321505-01 Spacer 4 400 400

Hardware

PN Nomenclature Per Kit (each)

Total for Kits

Total required

8 MS20426AD3-4 Rivet 22 2200 2200

9 MS35206-250 Screw 12 1200 1200

10 MS35206-247 Screw 4 400 400

11 NAS1149FN832P Washer 4 400 400

12 NAS43HT3-20 Spacer 3 300 300

13 ISO7045-M3X8-

A2-50-Z

Screw 3 300 300

14 ISO7089-M3-A2 Washer 3 300 300

Light Assemblies

PN Nomenclature Per Kit (each)

Total for Kits

Total required

15 201321011-10 Position Light Assy ,Red Lower

1 100 100

16 201321011-30 Position Light Assy, Red Upper

1 100 100

17 201321011-50 Position Light Assy, Green Lower

1 100 100

18 201321011-70 Position Light Assy , Green Upper

1 100 100

19 201321011-90 Position Light Assy, Tail

1 100 100

5.3 Appendix C: Spares Content List

Position Lights

PN Nomenclature Total required

1 CP40238-04-D4 Light, Position, Tail 12

2 CP40237-05-D3 Light, Position, Upper Left 12

3 CP40237-06-D4 Light, Position, Upper Right 12

4 CP40237-05-D2 Light, Position, Lower Left 12

5 CP40237-06-D1 Light, Position, Lower Right 12 Light mounting components:

Item PN Nomenclature Total required 1 003128-05 Doubler 12

2 003129-05 Tail Light Mounting Adapter 6

3 003130-15 Fairing (must have nutplates installed) 12 4 003130-16 Fairing (must have nutplates installed) 12 5 003603-05 Light Block, Right 12

6 003603-07 Light Block, Left 12

7 201321505-01 Spacer 10