FA853321R0005.pdf
PDF 246 KB Posted
- Attached to
- J85-GE-5 JetCal Analyzer Federal contract opportunity
- Solicitation number
- FA8533-21-R-0005
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA853321R0005.pdf | ||
| AFMC158Packaging.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)
PREVIOUS EDITION NOT USABLE Prescribed by GSA – FAR (48 CFR) 53/214(c)
SOLICITATION, OFFER AND AWARD J
1. THIS CONTRACT IS A RATED ORDER
UNDER DPAS (15CFR 7900)
RATING
DO: C9
Page of Page
2. CONTRACT NO. 3. SOLICITATION NO.
FA8533-21-R-0005
4. TYPE OF SOLICITATION
SEALED BID (IFB)
NEGOTIATED (RFP)
7. ISSUED BY
BASE & A/C SUPPORT/ATS/HUMAN SYSTEM, AFLCMC/WNKAB
235 BYRON ST STE 19A
BLDG 300 CML PHN 478 222 1955
ROBINS AFB GA 31098-1670
BUYER: Lora A Gaines/WNKAB lora.gaines@us.af.mil Phone: (478) 222- 1955 Fax: (000) 000-0000 No Collect Calls
FA8533 8. ADDRESS OFFER TO (If other than Item 7)
11. TABLE OF CONTENTS
(X) SEC. DESCRIPTON PAGE(S) (X) Sec. DESCRIPTION PAGE(S)
PART I - THE SCHEDULE PART II - CONTRACT CLAUSES
X A SOLICITATION/CONTRACT FORM
X B SUPPLIES OR SERVICES AND
C DESCRIPTION/SPECS/WORK STATEMENT
X D PACKAGING AND MARKING
X E INPECTION AND ACCEPTANCE
X F DELIVERIES OR PERFORMANCE
X G CONTRACT ADMINISTRATION DATA
X H SPECIAL CONTRACT REQUIREMENTS
X I CONTRACT CLAUSES
PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER
X J LIST OF ATTACHMENTS
X K REPRESENTATIONS, CERTIFICATIONS AND
OTHER STATEMENTS OF OFFERORS
PART IV - REPRESENTATIONS AND INSTRUCTIONS
X L INSTRS., CONDS., AND NOTICES TO OFFERORS
X M EVALUATION AND FACTORS FOR AWARD
OFFER (Must be fully completed by offeror)
24. ADMINISTERED BY (If other than Item 7) SCD:B 25. PAYMENT WILL BE MADE BY CODE
(SEE ESP CLAUSE 252.232-7003.)
26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
28. AWARD DATE
X
5. DATE ISSUED 6.REQUISITION/PURCHASE NO
FD20602130405
NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.
9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if hand carried, in the depository located in until 4:00 (Hour) local time 24-FEB-2021 (Date).
CAUTION- LATE Submissions, Modifications, and Withdrawals: Section L, Provision No 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this section.
10. FOR INFORMATION
CALL:
A. NAME
Lora A Gaines
B. TELEPHONE (NO COLLECT CALLS)
(478 ) 222 -1955
NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.
12. In compliance with the above, the undersigned agrees, if this offer is accepted within 120 calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.
13. DISCOUNT FOR PROMPT PAYMENT(See Section I, Clause No 52.232-8)
10 CALENDAR DAYS 20 CALENDAR DAYS 30 CALENDAR DAYS CALENDAR DAYS
14. ACKNOWLEDGEMENT OF AMENDMENTS
(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated:
AMENDMENT NO. DATE AMENDMENT NO. DATE
15A. NAME AND
ADDRESS OF
OFFEROR
CODE FACILITY
16. NAME AND TITLE OF PERSON
AUTHORIZED TO SIGN OFFER (Type or print)
15B. TELEPHONE NO.
(Include Area Code)
15C.CHECK IF REMITTANCE ADDRESS
IS DIFFERENT FROM ABOVE-ENTER
SUCH ADDRESS IN SCHEDULE.
17. SIGNATURE 18. OFFER DATE
AWARD (To be completed by Government)
19. ACCEPTED AS TO ITEMS 20. AMOUNT
21. ACCOUNTING AND APPROPRIATION
SEE SCHEDULE
22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN
COMPETITION
10 U.S.C. 2304 (c) ( 1 ) 41 U.S.C. 253 (c) X
23. SUBMIT INVOICES TO ADDRESS SHOWN IN
(4 copies unless otherwise specified)
ITEM
SOLICITATION
IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.
C. E-MAIL ADDRESS
lora.gaines@us.af.mil
FA8533-21-R-0005
PART I - THE SCHEDULE
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
This solicitation is intended to result in an award of a requirements‐type Indefinite Delivery contract as defined in FAR 16.5 for a total ordering period of 5 years. FAR 15 Contract by Negotiation will be used. All clauses/provisions in the contract are important and the contractor shall ensure that it has reviewed and understands each one. This contract has ordering periods and no options. Therefore, no mods will be issued to open up those periods. The prices of orders wil be detemined by the ordering period in which they are placed.
All quantities within the schedule are Best Estimated Quantities (BEQs). The BEQs in this solicitation are not a guarantee to the Contractor that the estimated quantities will be ordered, or that conditions affecting requirements will be stable or normal. Failure of the Government to acquire such items in amounts or quantities described in the Schedule as estimated will not entitle the Contractor to any equitable adjustment. BEQs do not represent a minimum or maximum quantity.
It is estimated that the proposal will be in excess of $2M, therefore Certified Cost and Pricing Data (CCPD) is required. If the Contractor needs additional information on CCPD proposals, please contact the Contracting Officer early in time period. Proposals must come with an electronic working cost model in excel format. As this effort is a follow on, proposed hours, materials, and other subcontracts shall be based on provided actuals. Specific attention should be paid to DFARS 252.215-7009 Proposal Adequacy Checklist which must be completed as submitted as part of the proposal and DFARS 252.215-7010 Requirements for Certified Cost or Pricing Data, it is expected that the Certificate of Current Cost and Pricing Data will be executed within 3 business days of handshake agreement, We request that you set up a pre-proposal conference with the Air Force team no later than 15 days after RFP release. We leave it up to you to determine if you would find it more helpful to have it immediately upon starting to prepare proposal or after you have time to collect documents or establish your company proposal strategy.
The Government anticipates that orders for Foreign Military Sales (FMS) requirements will be issued under this contract. However, no orders for FMS requirements will be issued unless a valid letter of Offer and Acceptance for the items to be ordered has been signed by the United States Government and the FMS customer's Government.
Orders for FMS requirements will identify the FMS customer, applicable funding, and other appropriate information.
Note to Contractor: Foreign Military Sales 10 TO 15 DAYS PRIOR TO SHIPMENT, CONTACT THE DCMA/ACO TRANSPORTATION OFFICE FOR SHIPPING
ADDRESS/INSTRUCTIONS.
CALENDAR DAYS: All references to "days" are hereby defined as "calendar days", unless noted otherwise.
Clauses fill in apply:
52.216‐21: (f) the Contractor shall not be required to make any deliveries under this contract after completion of all orders placed within the ordering period.
52.216‐18: (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from date of award to end of final ordering period.
52.215-20 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER
THAN CERTIFIED COST OR PRICING DATA -- ALTERNATE III (c) Working Excel cost models
52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER
THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS -- ALTERNATE III
(c) Working Excel cost models
The pricing arrangement for this contract will be Firm Fixed Price. Delivery orders may be placed from time to time, at any time, during each ordering period.
CLINs Contract Period Timeframes 0001 Basic Period Date of Award ‐ 12 Months 1001 Ordering Period l 12 Months after Basic Ordering Period 2001 Ordering Period II 12 Months after Ordering Period l 3001 Ordering Period III 12 Months after Ordering Period II 4001 Ordering Period IV 12 Months after Ordering Period Ill
BASIC PERIOD: Applicable to orders placed during 12 month period immediately following the award of the Basic Contract
JETCAL ANALYZER
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Amount
6 EA
NSN: 4920-01-497-2965 RN
PROCUREMENT OF EQUIPMENT
JETCAL ANALYZER
Manufacturer Part Number
BH112PA-77-3
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2008 2008
Foreign Military Sales :FMS Case:
Buy American Act/Balance of Payments Program IUID Required: Yes
JETCAL ANALYZER
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
+ TBD ORIGIN
Type / Ship To PACRN Mark For
+ TBD PAA
Type / Ship To Quantity (U/I) *ARO Each
Individual Order _ Req No / Pri
Required Delivery
+ TBD EA *180 Calendar Days
Proposed Delivery
+ TBD EA
Packaging shall be IAW attached AFMC 158
ORDERING PERIOD I:
CLIN 1001 comprises Ordering Period l. Ordering Period l is effective 12 months after the Basic Ordering Period
JETCAL ANALYZER
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Amount
4 EA
NSN: 4920-01-497-2965 RN
PROCUREMENT OF EQUIPMENT
JETCAL ANALYZER
Manufacturer Part Number
BH112PA-77-3
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
JETCAL ANALYZER
Buy American Act/Balance of Payments Program IUID Required: Yes
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
+ TBD ORIGIN
Type / Ship To PACRN Mark For
+ TBD PAA
Type / Ship To Quantity (U/I) *ARO Each
Individual Order _ Req No / Pri
Required Delivery
+ TBD EA *180 Calendar Days
Proposed Delivery
ORDERING PERIOD ll:
CLIN 2001 comprises Ordering Period ll. Ordering Period ll is effective 12 months after Ordering Period l
JETCAL ANALYZER
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Amount
4 EA
NSN: 4920-01-497-2965 RN
PROCUREMENT OF EQUIPMENT
JETCAL ANALYZER
Manufacturer Part Number
BH112PA-77-3
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
JETCAL ANALYZER
Buy American Act/Balance of Payments Program IUID Required: Yes
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
+ TBD ORIGIN
Type / Ship To PACRN Mark For
+ TBD PAA
Type / Ship To Quantity (U/I) *ARO Each
Individual Order _ Req No / Pri
Required Delivery
+ TBD EA *180 Calendar Days
Proposed Delivery
ORDERING PERIOD lll:
CLIN 3001 comprises Ordering Period lll. Ordering Period lll is effective 12 months after Ordering Period ll
JETCAL ANALYZER
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Amount
4 EA
NSN: 4920-01-497-2965 RN
PROCUREMENT OF EQUIPMENT
JETCAL ANALYZER
Manufacturer Part Number
BH112PA-77-3
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
JETCAL ANALYZER
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Buy American Act/Balance of Payments Program IUID Required: Yes
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
+ TBD ORIGIN
Type / Ship To PACRN Mark For
+ TBD PAA
Type / Ship To Quantity (U/I) *ARO Each
Individual Order _ Req No / Pri
Required Delivery
+ TBD EA *180 Calendar Days
Proposed Delivery
ORDERING PERIOD IV:
CLIN 4001 comprises Ordering Period lV. Ordering Period lV is effective 12 months after Ordering Period lll
JETCAL ANALYZER
Item No.
Firm Fixed Price Best Estimated Qty
U/I Unit Price Amount
4 EA
NSN: 4920-01-497-2965 RN
PROCUREMENT OF EQUIPMENT
JETCAL ANALYZER
Manufacturer Part Number
BH112PA-77-3
JETCAL ANALYZER
Priority: R ROUTINE
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Buy American Act/Balance of Payments Program IUID Required: Yes
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
+ TBD ORIGIN
Type / Ship To PACRN Mark For
+ TBD PAA
Type / Ship To Quantity (U/I) *ARO Each
Individual Order _ Req No / Pri
Required Delivery
+ TBD EA *180 Calendar Days
Proposed Delivery
SHIP TO / PLACE OF PERFORMANCE
TYPE/CODE: + TBD
MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)
AWARD NUMBER:
PART I - THE SCHEDULE
SECTION E
INSPECTION AND ACCEPTANCE
52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)
(IAW FAR 46.302)
(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)
52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(IAW FAR 46.311, DFARS 246.202-4(1))
(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*
Title Number Date Tailoring *See Individual Line Item Schedule
(Applicable only if specified in the individual order/call issued hereunder)
52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)
(IAW FAR 46.316)
(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)
INSPECTION AND ACCEPTANCE (SEP 1999)
(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)
Government Contract Quality Assurance Inspection and Acceptance will be at (Final):
[CONTRACTOR FILL-IN]
Item No(s): See schedule for items with the following code(s) listed below :
Inspection Code and Address:
PART I - THE SCHEDULE
SECTION F
DELIVERIES OR PERFORMANCE
52.211-8 TIME OF DELIVERY (JUN 1997)
(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE ITEM.
(Applicable when the Government desires delivery by a certain time but requires delivery by a specified later time, and the delivery schedule is to be based on the date of the contract)
52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)
(IAW FAR 11.703(b)) (Applicable when fixed-price supplies are furnished)
52.242-15 STOP-WORK ORDER (AUG 1989)
(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)
(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)
52.247-29 F.O.B. ORIGIN (FEB 2006)
(IAW FAR 47.303-1(c)) (Applicable when specifying f.o.b. origin)
52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)
(IAW FAR 47.303-2(c))
52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)
(IAW FAR 47.303-17(f)) (Applicable when specifying f.o.b. origin)
F.O.B. ORIGIN (OCT 1993)
(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:
F.O.B. Address
[CONTRACTOR FILL-IN]
(Applicable when delivery term is f.o.b. origin)
PART I - THE SCHEDULE
SECTION G
CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)
(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))
(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:
(1) Document type. The Contractor shall use the following document type(s).
(Contracting Officer: Insert applicable document type(s).
Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)
(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.
(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)
(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.
timesheets) in support of each payment request.
(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.
(Contracting Officer: Insert applicable email addresses or “Not applicable.”)
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.
(Applicable in solicitations and contracts or task or delivery orders, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, when 252.232-7003 is used and none of the exceptions at 232.7002(b)(1) apply. See PGI 232.7004 for instructions on completing the clause)
PART II - CONTRACT CLAUSES
SECTION I
CONTRACT CLAUSES
5352.201-9101 OMBUDSMAN (OCT 2019)
(IAW AFFARS 5301.9103)
(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Timothy R.
Inman at 478 222 -4097 , FAX 000 000 -0000 , email timothy.inman@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.
(Applicable to all solicitations and contracts)
52.202-1 DEFINITIONS (JUN 2020)
(IAW FAR 2.201)
(Applicable when the simplified acquisition threshold is exceeded)
52.203-3 GRATUITIES (APR 1984)
(IAW FAR 3.202)
(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)
52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)
(IAW FAR 3.404)
(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))
52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)
(IAW FAR 3.503-2)
52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)
(IAW FAR 3.502-3)
52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR
IMPROPER ACTIVITY (MAY 2014)
(IAW FAR 3.104-9(a))
(Applicable when noncommercial and the simplified acquisition threshold is exceeded)
52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)
(IAW FAR 3.104-9(b))
52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS
(JUN 2020)
(IAW FAR 3.808(b))
(Applicable over $150,000)
52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (JUN 2020)
(IAW FAR 3.1004(a)) (Applicable to solicitations and contracts exceeding $5.5 million and the period of performance is greater than 120 days, unless for the acquisition of a commercial item under Part 12 or performed entirely outside the U.S.)
52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY
AGREEMENTS OR STATEMENTS (JAN 2017)
(IAW FAR 3.909-3 (b))
(Applicable in all solicitations and resultant contracts other than personal services contracts with individuals)
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS
(SEP 2011)
(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))
252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER
DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)
(IAW DFARS 203.570-3)
(Applicable when exceeding the simplified acquisition threshold (except for commercial items))
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS
(SEP 2013)
(IAW DFARS 203.970)
252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (AUG 2019)
(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii)) (Applicable to solicitations and contracts when FAR 52.203-13 is included)
252.203-7004 DISPLAY OF HOTLINE POSTERS (MAY 2019)
(IAW DFARS 203.1004(b)(2)(ii)) (Applicable to acquisitions over $5.5 million, except for commercial items)
52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)
(IAW FAR 4.303)
52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)
(IAW FAR 4.1303)
52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT
AWARDS (JUN 2020)
(IAW FAR 4.1403(a))
(Applicable over $30,000, unless not required to be reported in FPDS)
52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)
(IAW FAR 4.1105(b)) (Applicable to solicitations that contain the provision at 52.204-7, and resulting contracts)
52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)
(IAW FAR 4.1804(c), FAR 12.301(d)) (Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)
52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS
(DEC 2014)
(IAW FAR 4.1202(b))
52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS
(JUN 2016)
(IAW FAR 4.1903)
(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)
52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES
DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED
ENTITIES (JUL 2018)
(IAW FAR 4.2004)
(Applicable on all contracts and solicitations.)
52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND
VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020)
(IAW 4.2105(b))
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)
(IAW DFARS 204.404-70(b)) (Applicable to all orders issued hereunder)
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT
REPORTING (DEC 2019)
(IAW DFARS 204.7304(c))
(Applicable to all solicitations and contracts, including commercial except when solely for commercial-off-the-shelf items)
252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION
SUPPORT (MAY 2016)
(IAW DFARS 204.7403(b), DFARS 212.301(f)(i)(F))
(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)
252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE
TELECOMMUNICATIONS EQUIPMENT OR SERVICES (DEC 2019)
(IAW DFARS 204.2105(c))
(Applicable to all soliciations.)
252.204-7020 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (NOV 2020)
(IAW DFARS 204.7304(e))
(Applicable in all solicitations and contracts, task orders, or delivery orders, including those using FAR part 12 procedures for the acquisition of commercial items, except for those that are solely for the acquisition of COTS items)
252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS
(DEC 1991)
(IAW DFARS 205.470, DFARS 212.301(f)(x))
(Applicable over $1,000,000)
52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH
CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT
(JUN 2020)
(IAW FAR 9.409)
(Applicable when exceeding $35,000)
52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING
RESPONSIBILITY MATTERS (OCT 2018)
(IAW FAR 9.104-7(c))
(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209-7)
52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS
(NOV 2015)
(IAW FAR 9.108-5(b))
(Applicable to all solicitations and contracts for the acquisition of products and services (including construction) unless waived
IAW FAR 9.108-4)
252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE
GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM
(MAY 2019)
(IAW DFARS 209.409)
(Applicable to solicitations and contracts with a value of $150,000 or more)
52.210-1 MARKET RESEARCH (JUN 2020)
(IAW FAR 10.003)
(Applicable to solicitations and contracts over $5.5 million for the procurement of items other than commercial items)
52.211-5 MATERIAL REQUIREMENTS (AUG 2000)
(IAW FAR 11.304)
(Applicable to supplies that are not commercial items)
52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)
(IAW FAR 11.604(b)) This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).
(Applicable to all rated orders)
252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)
(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))
(a) Definitions. As used in this clause—
“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .
“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .
(c) Unique item identifier.
(1) The Contractor shall provide a unique item identifier for the following:
(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:
Contract Line, Subline, or Exhibit Line Item Number
Item Description
See Schedule as Applicable
(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:
Contract Line, Subline, or Exhibit Line Item Number
Item Description
*Items less than $5000, which require UID, will be specifically identified in See Schedule as Applicable the schedule.
(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).
(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).
(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .
(2) Embedded items shall be reported by one of the following methods—
(i) Use of the embedded items capability in WAWF;
(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or
(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.
(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)
252.211-7008 USE OF GOVERNMENT-ASSIGNED SERIAL NUMBERS (SEP 2010)
(IAW DFARS 211.274-6(c), DFARS 212.301(f)(xv)) (Applicable to solicitations and contracts that contain clause 252.211-7003 and require marking of major end items)
52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)
(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)
52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)
(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)
52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA
(AUG 2011)
(IAW FAR 15.408(b))
(Applicable if negotiated and exceeding $750,000, when certified cost or pricing data is required)
52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (JUN 2020)
(IAW FAR 15.408(d)(1))
52.215-13 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA--MODIFICATIONS
(JUN 2020)
(IAW FAR 15.408(e)(1))
52.215-14 INTEGRITY OF UNIT PRICES (JUN 2020)
(IAW FAR 15.408(f)(1)) (Applicable when negotiated and exceeding the simplified acquisition threshold)
52.215-14 INTEGRITY OF UNIT PRICES -- ALTERNATE I (OCT 1997)
(IAW FAR 15.408(f)(2)) (Alternate I is applicable when negotiated and exceeding the simplified acquisition threshold and contracting was without full and open competition)
52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)
(IAW FAR 15.408(g))
52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER
THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (JUN 2020)
(IAW FAR 15.408(m))
(Applicable when it is reasonably certain that certified cost or pricing data or data other than certified cost or pricing data will be required for modifications)
52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)
(IAW FAR 15.408(n)(2)) (Applicable to orders issued hereunder)
252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS (DEC 2012)
(IAW DFARS 215.408(1))
(Applicable to any order awarded on the basis of certified cost or pricing data)
(Applicable when a fixed-price incentive (firm target) pricing arrangement is specified)
(Applicable to If supplies or services are to be ordered under a provisioning document or Government option and the prices are to be subject to incentive price revision under the clause)
52.216-18 ORDERING (AUG 2020)
(IAW FAR 16.506(a))
(a) Such orders may be issued from .
52.216-19 ORDER LIMITATIONS (OCT 1995)
(IAW FAR 16.506(b))
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) Maximum order. The Contractor is not obligated to honor--
(1) Any order for a single item in excess of quantity of 6;
(2) Any order for a combination of items in excess of quantity of 6; or
(3) A series of orders from the same ordering office within 15 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.
(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.
52.216-21 REQUIREMENTS (OCT 1995)
(IAW FAR 16.506(d)(1))
(f) the Contractor shall not be required to make any deliveries under this contract after
(Applicable to all orders issued hereunder)
(Applicable when a letter contract is contemplated)
52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (OCT 2018)
(IAW FAR 19.708(a)) (Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)
52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (NOV 2020)
(IAW FAR 19.309(c))
(h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:
(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code ________ assigned to contract number _______________.
(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.
(3) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not a women-owned small business concern.
(4) Women-owned small business (WOSB) concern eligible under the WOSB Program.
[Complete only if the Contractor represented itself as a women-owned small business concern in paragraph (h)(3) of this clause.] The Contractor represents that—
(i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [ ] is, [ ] is not is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (h)(4)(i) of this clause is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture.
[The Contractor shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _______________________________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.
(5) Economically disadvantaged women-owned small business (EDWOSB) concern.
[Complete only if the Contractor represented itself as a women-owned small business concern eligible under the WOSB Program in (h)(4) of this clause.] The Contractor represents that—
(i) It [ ] is, [ ] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (h)(5)(i) of this clause is accurate for each EDWOSB concern participating in the joint venture.
[The Contractor shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___________________________________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.
(6) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not a veteran-owned small business concern.
(7) [Complete only if the Contractor represented itself as a veteran-owned small business concern in paragraph (h)(6) of this clause.] The Contractor represents that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern.
(8) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that—
(i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and
(ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (h)(8)(i) of this clause is accurate for each HUBZone small business concern participating in the HUBZone joint venture.
[The Contractor shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: _________________________________________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.
[Contractor to sign and date and insert authorized signer’s name and title.]
(Applicable in solicitations and contracts exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas)
(Applicable in solicitations and contracts when the item being acquired has been assigned a manufacturing or supply NAICS code, and any portion of the requirement is set-aside for any of the small business concerns identified in 19.000(a)(3) including multiple-award contracts that provide for the set-aside of orders to small business concerns or for orders issued directly to one small business concern in accordance with 19.504(c)(1)(ii), or is awarded on a sole source basis in accordance with subpart 19.8, 19.13, 19.14, or 19.15.)
(Applicable to solicitations and contracts that include Small Business Subcontracting Plan when using the Demonstration Project described at 226.72.)
(Applicable over $5,000,000)
52.222-3 CONVICT LABOR (JUN 2003)
(IAW FAR 22.202)
52.222-19 CHILD LABOR COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION
2020-O0019) (JUL 2020)
(IAW Deviation 2020-O0019 Revision 1)
(Applicable for supplies that exceed the micro-purchase threshold)
52.222-20 CONTRACTS FOR MATERIALS, ARTICLES, AND EQUIPMENT (JUN 2020)
(IAW FAR 22.610)
52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015)
(IAW FAR 22.810(a)(1)) (Applicable when exceeding $10,000, except those exempted by FAR 22.807 (b) which includes those for work to be performed outside the U.S. by employees who were not recruited within the U.S.)
52.222-35 EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)
(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1)) (Applicable when the expected value is $150,000 or more except when work is performed outside the United States by employees recruited outside the United States or the Director, Office of Federal Contract Compliance Programs, has waived, in accordance with 22.1305(b), all of the terms of the clause)
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)
(IAW FAR 22.1408(a)) (Applicable over $15,000 except when performance of work and recruitment of workers will occur outside the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island, or the agency head has waived, in accordance with 22.1403(a) or 22.1403(b) all the terms of the clause)
52.222-37 EMPLOYMENT REPORTS ON VETERANS (JUN 2020)
(IAW FAR 22.1310(b)) (Applicable when the expected value is $150,000 or more and workers were recruited within the United States)
52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR
RELATIONS ACT (DEC 2010)
(IAW FAR 22.1605)
(Applicable to all solicitations and contracts except under the simplified acquisition threshold, for work performed exclusively outside the U.S., or covered in their entirety by an exemption granted by the Secretary)
52.222-50 COMBATING TRAFFICKING IN PERSONS (OCT 2020)
(IAW FAR 22.1705(a)(1))
52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (OCT 2015)
(IAW FAR 22.1803)
(c) Web site. Information on registration for and use of the E-Verify program can be obtained via the Internet at the Department of Homeland Security Web site: http://www.dhs.gov/E-Verify .
(Applicable to solicitations and contracts exceeding the Simplified Acquisition Threshold, performed in the U.S., and the period of performance is longer than 120 days)
(Applicable to contracts that include Service Contract Labor Standards where work is performed, in whole or part, in the United States)
252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS
(DEC 2010)
(IAW DFARS 222.7405)
(Applicable to contracts in excess of $1 million utilizing funds appropriated by the FY10 or subsequent DoD appropriations acts, except in contracts for the acquisition of commercial items and commercially available off-the-shelf items)
252.222-7999 COMBATING RACE AND SEX STEREOTYPING (DEVIATION 2021-O0001)
(NOV 2020)
(IAW Deviation 2021-O0001)
(Applicable in solicitations and contracts, when a contract is contemplated that will include the clause at Federal Acquisition Regulation (FAR) 52.222-26, Equal Opportunity or its Alternate I.)
52.223-6 DRUG-FREE WORKPLACE (MAY 2001)
(IAW FAR 23.505)
(Applicable when the simplified acquisition threshold is exceeded except if performance is entirely outside the U.S. and its outlying areas)
52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE
DRIVING (JUN 2020)
(IAW FAR 23.1105)
(Applicable to all solicitations and contracts)
(Applicable to solicitations and contracts not delivered or performed outside the U.S. or it’s outlying areas, for products that may contain high global warming potential hydrofluorocarbons or involve maintenance or repair of electronic or mechanical devices)
252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)
(IAW DFARS 223.7306, DFARS 212.301(f)(xxi)) (Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)
5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS)
(OCT 2019)
(IAW AFFARS 5323.804-90)
52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)
(IAW FAR 25.1103(a)) (Applicable to supplies or services involving the furnishing of supplies unless an exception applies)
252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM--BASIC (DEC 2017)
(IAW DFARS 225.1101(2)(i) and (2)(ii)) (Applicable except when an exception to the Buy American statute or Balance of Payments Program is known to apply, or if using the clause at 252.225-7021, Trade Agreements; or 252.225-7036, Buy American —Free Trade Agreements—Balance of Payments Program)
(Applicable to the acquisition of end products in support of operations in Afghanistan)
252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2017)
(IAW DFARS 225.1101(3))
(Applicable if one of the following clauses are included: DFARS 252.225-7001, 252.225-7021 or 252.225-7036)
(Applicable when exceeding the simplified acquisition threshold that require furnishing supplies for use outside the United States, construction to be performed outside the United States, or services to be performed primarily outside the United States)
252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (DEC 2017)
(IAW DFARS 225.7002-3(a))
(Applicable when exceeding the simplified acquisition threshold for food; clothing; tents, tarpaulins or covers; cotton and other natural fiber products; woven silk or woven silk blends; spun silk yarn for cartridge cloth; synthetic fabric, coated synthetic fabric; canvas products; wool; or any item of individual equipment (FSC 8465) manufactured from or containing such fibers, yarns, fabrics, or materials; to waste and byproducts of cotton or wool used in the production of propellants and explosives)
252.225-7013 DUTY-FREE ENTRY (DEVIATION 2020-O0019) (JUL 2020)
(IAW Deviation 2020-O0019) (Applicable to contracts requiring duty free entry of goods into the United States)
(Applicable to contracts other than those with performance in the United States)
252.225-7027 RESTRICTION ON CONTINGENT FEES FOR FOREIGN MILITARY SALES
(APR 2003)
(IAW DFARS 225.7307(a))
(b) (1) For sales to the Government(s) of Australia, Taiwan, Egypt, Greece, Israel, Japan, Jordan, Republic of Korea, Kuwait, Pakistan, Philippines, Saudi Arabia, Turkey, Thailand, or Venezuela (Air Force), contingent fees in any amount.
(Applicable to Foreign Military Sales awarded on behalf of the above foreign country customer(s))
252.225-7028 EXCLUSIONARY POLICIES AND PRACTICES OF FOREIGN GOVERNMENTS
(APR 2003)
(IAW DFARS 225.7300, DFARS 225.7307(b))
(Applicable for international military education training (IMET) and foreign military sales (FMS)
(Applicable to solicitations and contracts for textile components to be supplied to the Afghan National Army or the Afghan National Police for production of uniforms)
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)
(IAW DFARS 225.7901-4)
252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND
TUNGSTEN (OCT 2020)
(IAW DFARS 225.7018-5)
252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT
SYSTEMS (DEVIATION 2020-O0015) (MAY 2020)
(IAW Deviation 2020-O0015)
(Applicable in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, unless—
(a) The acquisition is for—
(1) Counter-unmanned aircraft system surrogate testing and training; or
(2) Intelligence, electronic warfare, and information warfare operations, texting, analysis, and training; or
(b) A waiver has been granted by the Secretary of Defense in accordance with section 848 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92).)
252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC
ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS
(APR 2019)
(IAW DFARS 226.104)
(Applicable to supplies or services exceeding $500,000)
52.227-1 AUTHORIZATION AND CONSENT (JUN 2020)
(IAW FAR 27.201-2(a)(1))
(Applicable except when both complete performance and delivery are outside the United States)
52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT
INFRINGEMENT (JUN 2020)
(IAW FAR 27.201-2(b))
(Applicable when the simplified acquisition threshold is exceeded except when both complete performance and delivery are outside the United States unless supplies are ultimately to be shipped into one of those areas)
52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)
(FEB 2013)
(IAW FAR 29.401-3(b))
(Applicable when the simplified acquisition threshold is exceeded and fixed-price noncompetitive, and performed wholly or partly within the United States, its possessions or territories, Puerto Rico or the Northern Mariana Islands)
52.229-12 TAX ON CERTAIN FOREIGN PROCUREMENTS (JUN 2020)
(IAW 29.402-3(b)) (Applicable in solicitations that contain the provision at 52.229–11, Tax on Certain Foreign Procurements—Notice and
Representation and resultant contracts in which the contractor has indicated that it was a foreign person in solicitation provision 52.229–11, Tax on Certain Foreign Procurements—Notice and Representation.)
(Applicable over $750,000 unless exempted by FAR 30.201-1)
(Applicable over $750,000 but less than $50,000,000, and the Contractor certifies it is eligible for and elects to use modified CAS coverage (see 48 CFR 9903.201-2 (FAR Appendix )), unless the clause FAR 52.230-4, Consistency in Cost Accounting Practices, is used; also applicable to foreign concerns when performance is within the United States, its territories and possessions)
52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS (JUN 2010)
(IAW FAR 30.201-4(d)(1)) (Applicable when either clause FAR 52.230-2, 52.230-3, 52.230-4, or 52.230-5 are incorporated)
252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)
(IAW DFARS 231.100-70)
(Applicable over $500,000)
52.232-1 PAYMENTS (APR 1984)
(IAW FAR 32.111(a)(1)) (Applicable to fixed-price supply or services and non-regulated communication services).
52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)
(IAW FAR 32.111(b)(1)) (Applicable to fixed-price supply or fixed-price service)
52.232-11 EXTRAS (APR 1984)
(IAW FAR 32.111(c)(2)) (Applicable to fixed-price supply, fixed-price service, or transportation)
52.232-17 INTEREST (MAY 2014)
(IAW FAR 32.611(a), FAR 32.611(b)) (Applicable when exceeding the simplified acquisition threshold)
52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014)
(IAW FAR 32.806(a)(1)) (Applicable when the micro-purchase threshold is exceeded, unless the contract will prohibit the assignment of claims (see 32.803(b))
52.232-25 PROMPT PAYMENT (JAN 2017)
(IAW FAR…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .