19-33907_RFI-JetCal Analyzer.docx

Request for Information Questionnaire Test Set, Electronics System (JetCal Analyzer)

(NSN: 4920-01-497-2965)

T-38 and F-5

CAUTION:

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for design, qualification and production of the Test Set, Electronics System NSN: 4920-01-497-2965, P/N BH112PA-77-3. The level of security clearance and amount of foreign participation in this requirement has not been determined.

This item will be Acquisition Method Code 3/R. The item is to be acquired directly from the actual manufacturer and the data or the rights to use the data needed to purchase this part from any additional sources are not owned by the government.

The Government does not own or have access to the data for this item. The Government has determined that this system is a non-commercial item.

The requirements for this tester are military unique since the application is only for the T-38/F-5 series aircraft turbine engine.

Samples of this test set are not available for potential developers/suppliers to evaluate.

Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts.

The sole source contractor for this effort is Howell Instruments, Inc., Original Equipment Manufacturer, Cage 98869.

Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The Government will not reimburse participants for any expenses associated with their participation in this survey.

FAR 52.215-3 -- Request for Information or Solicitation for Planning Purposes Request for Information or Solicitation for Planning Purposes (Oct 1997)

(a) The Government does not intend to award a contract on the basis of this solicitation or to otherwise pay for the information solicited except as an allowable cost under other contracts as provided in subsection 31.205-18, Bid and proposal costs, of the Federal Acquisition Regulation.

(b) Although “proposal” and “offeror” are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal.

(c) This solicitation is issued for the purpose of the Test Set, Electronic Systems. Self-contained unit to troubleshoot for uninstalled engines (in the test cell) and on-wing trimming/functional check of the General Electric (GE) J85 series turbojet afterburning engines, utilized with the T-38 and F-5 aircraft.

(End of Provision)

INSTRUCTIONS:

1. The document(s) below contain a description of the Test Set, Electronic Systems requirement and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability.

2. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the Government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.)

a. Identify any areas of work that your organization believes should be broken out exclusively for Small Business.

3. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged.

4. Questions relative to this market survey should be addressed to the PCO.

Additional Information Test Set, Electronic Systems

PURPOSE/DESCRIPTION

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for design, qualification and production of the Test Set, Electronics System NSN: 4920-01-497-2965, P/N BH112PA-77-3. The Test Set, Electronic Systems, which is a turbine engine data collection and analysis system used to determine J85-GE-5 engine condition and performance. The system contains hardware that collects and displays data, an executive software program that controls the configuration of the hardware, and engine specific application software that facilitates maintenance tests. Executive software provides the capability to perform system activities such as data acquisition, calibration, and report production. Application software is specifically designed to support testing of the J85-GE-5 turbojet afterburning engine. The system provides automated data recording, fault monitoring, and report production.

This requirement is for production only. This contract will be for five (5) ordering periods (12 months each). The projected quantities will be Best Estimated Quantities of four (4) per year.

The Test Set, Electronic Systems provides extensive diagnostics capability during testing of the engine. This capability incorporates a health assessment of the fuel control system, compressor section, turbine section, and Variable Exhaust Nozzle/Inlet Guide Vanes rigging. The test set records data when specific run conditions are met and fills in the appropriate fields in the Jet Engine Test log data sheet or the AFTO Form 153, Engine Trim Checklist. The physical dimensions are the following:

Width: 22 Depth: 22 Height: 37 Weight: 100 (approximate)

CONTRACTOR CAPABILITY SURVEY

Test Set, Electronic Systems

(NSN: 4920-01-497-2965 / PN# BH112PA-77-3)

Part I. Business Information

Please provide the following business information for your company/institution and for any teaming or joint venture partners:

· Phone Number:

· E-mail Address:

· Web Page URL:

Size of business pursuant to North American Industry Classification System (NAICS) Code: 334515

Responses to the Capability Survey Part I and Part II must be received no later than close of business 13 March 2020. Please ensure data is in a readable electronic format that can be received through a firewall. Attachments shall not to exceed 10 MB per email. Multiple emails are acceptable. Responses must be sent via email to the following:

· Robert Rollins robert.rollins.2@us.af.mil

· Kimberly Petty kimberly.petty.2@us.af.mil

Questions relative to this market research should be addressed to the PCO:

AFLCMC/WNKAB

Attn: Robert Rollins 235 Byron St., STE 19A Robins AFB GA 31098-1600

Part II. Capability Survey Questions

A. General Capability Questions:

1. Describe briefly the capabilities of your facility and the nature of the goods and/or services you provide. Include a description of your staff composition and management structure.

2. Describe your company's past experience on previous projects similar in complexity to this requirement. Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual point of contact (Contracting Officer or Program Manager).

3. Describe your company's capabilities and experience in generating technical data, engineering drawings and manuals. Identify what software programs are utilized to generate these data products and what formats are available for delivered items.

4. What is your company’s current maximum production capacity per month? Provide information on any facility reserves you may possess to increase production capacity in the event of an immediate need do to critical operational mission requirements.

5. What quality assurance processes and test qualification practices does your company employ? Provide a description of your quality program (ISO 9001, AS9100, etc.).

a. Provide a detailed quality plan implementing AS9100 (or equivalent).

B. Commerciality Questions:

1. Is there established catalog or market prices for our requirement?

2. If you offer this product and/or service to both U.S. Government and commercial sources, is the same workforce used for both the U.S. Government and general public?

C. Manufacturing Questions

1. Describe your capabilities and experience in manufacturing with regard to the requirements of this effort.

2. Describe your capabilities and experience in developing/modifying manufacturing procedures. Include associated upgrade of technical orders and preparation of new technical orders.

3. Demonstrate your ability and experience in the manufacture of the same or similar components, which are currently utilized in the commercial or military environment by providing the following information on the same or similar items:

a) Contract Number

b) Procuring Agency

c) Contract Value

d) Number of assets shipped

4. Provide your commercial manual(s) or Acceptance Test Procedures (ATP) and your rights to these manuals and or ATP used in the manufacture and functional check of these or similar assets for Government Engineer review.

5. Describe your capabilities and experience in test, evaluation, and repair processes/procedures with regard to manufacturing items.

6. Describe your configuration management processes and how you identify and resolve parts obsolescence and diminishing manufacturing sources problems?

7. Discuss your process for addressing any fit, form, and or function issues that may arise out of the requirements of this effort.

8. Describe your process for maintaining inventory records and reporting on hand/work-in-process balance and manufacturing status to your customer.

9. Include a detailed listing of facilities and equipment, including quantities, required to satisfy the requirements of this effort.

a. Provide an outline of the proposed process, including inspections.

i. State the type of test procedures are anticipated for this effort.

ii. State the type of inspection processes anticipated for this effort.

1. NDI/T.

2. Destructive testing/inspection.

10. How will your organization address the absence of drawings, specifications, technical data, test procedures, etc.

11. If the item cannot be manufactured in total, state what your organization can produce.

12. State any technology insertion ideas for the item that would be suitable for this effort.

13. Discuss any reverse engineering or item replacement opportunities that may be present.

image1.png