CDRL_A001_AND_A002.pdf

PDF 691 KB Posted Jul 17, 2018

Attached to: C17 Support Equipment_Adapter Kit_Test Kit_Low Pressure_Fuel Drain Lines Federal contract opportunity
Solicitation number: FA8526-18-R-0024
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Robins Air Force Base

About this file

From the source

CDRL A001_A002

View the file

Other files for this federal contract opportunity

Other files attached to C17 Support Equipment_Adapter Kit_Test Kit_Low Pressure_Fuel Drain Lines, newest first.
File	Type	Posted
PACKAGING.pdf	PDF	Jul 17, 2018
EDL.pdf	PDF	Jul 17, 2018
IUID.pdf	PDF	Jul 17, 2018
FA8526-18-R-0024.pdf	PDF	Jul 17, 2018
TRANSPORTATION.pdf	PDF	Jul 17, 2018
Export_Controlled_Technical_Data_Notice.pdf	PDF	Jul 17, 2018

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

16. REMARKS

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE Draft

b. COPIES

Final

Reg Repro

15. TOTAL

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Reset

CONTRACT DATAREQUIREMENTSLIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B.EXHIBIT C.CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

Company Logo

Company Name

Address Phone and/or email (all optional)

Cage Code

Item Name (taken from Boeing drawing)

First Article Test Plan

Submitted For

NSN: XXXX-XX-XXX-XXXX

Contract No.: XXXXXX-XX-X-XXXX

Part No.: 17GXXXXXX-XXX, Rev X

Serial No: XXXX-XXXX (supplied by PCO)

CDRL Item No.: A001

Submitted On: MM/DD/YYYY

Test Quantity: XX

Contractor Document #.: XXXXXXXX

Rev.: XXX

Submitted To

AFMC AFLCMC/WLE

Attn: (C-17 ENGR)

235 Byron St, Suite 19A

Robins AFB, GA 31098

Prepared by: Full Name Checked by: Full Name (Contractor QA)

Title: XXXXXXXXX Title: XXXXXXXXX

Signed: __________________ Signed: __________________

Date: MM/DD/YYYY Date: MM/DD/YYYY

1369379700C File Attachment FATP Cover Sheet Format Example.docx

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

16. REMARKS

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE Draft

b. COPIES

Final

Reg Repro

15. TOTAL

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Company Logo

Company Name

Address Phone and/or email (all optional)

Cage Code

Item Name (taken from Boeing drawing)

First Article Test Report

Submitted For

NSN: XXXX-XX-XXX-XXXX

Contract No.: XXXXXX-XX-X-XXXX

Part No.: 17GXXXXXX-XXX, Rev X

Serial No: XXXX-XXXX (supplied by PCO)

CDRL Item No.: A002

Submitted On: MM/DD/YYYY

Test Quantity: XX

Contractor Document #.: XXXXXXXX

Rev.: XXX

Submitted To

AFMC AFLCMC/WLE

Attn: (C-17 ENGR)

235 Byron St, Suite 19A

Robins AFB, GA 31098

Prepared by: Full Name Checked by: Full Name (Contractor QA)

Title: XXXXXXXXX Title: XXXXXXXXX

Signed: __________________ Signed: __________________

Date: MM/DD/YYYY Date: MM/DD/YYYY

1369379700C File Attachment FATR Cover Sheet Format Example.docx

Reset

CONTRACT DATAREQUIREMENTSLIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B.EXHIBIT C.CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

DD FORM 1423-1 Blank_2

DD FORM 1423-1 Blank_3

1 DATA ITEM NO: A001

2 TITLE OF DATA ITEM: First Article Qualification Test Plan and Procedures

4 AUTHORITY Data Acquisition Document No: DI-NDTI-81307A/T

Draft16 REMARKS:

Reg16 REMARKS:

Repro16 REMARKS:

Draft16 REMARKS_2:

Reg16 REMARKS_2:

Repro16 REMARKS_2:

Draft16 REMARKS_3:

Reg16 REMARKS_3:

Repro16 REMARKS_3:

Draft16 REMARKS_4:

Reg16 REMARKS_4:

Repro16 REMARKS_4:

Draft16 REMARKS_5:

Reg16 REMARKS_5:

Repro16 REMARKS_5:

Draft16 REMARKS_6: 1

Reg16 REMARKS_6: 1

Repro16 REMARKS_6:

Draft16 REMARKS_7:

Reg16 REMARKS_7:

Repro16 REMARKS_7:

Draft16 REMARKS_8:

Reg16 REMARKS_8:

Repro16 REMARKS_8:

Draft16 REMARKS_9:

Reg16 REMARKS_9:

Repro16 REMARKS_9:

Draft16 REMARKS_10:

Reg16 REMARKS_10:

Repro16 REMARKS_10:

Draft16 REMARKS_11:

Reg16 REMARKS_11:

Repro16 REMARKS_11: 1

Draft16 REMARKS_12:

Reg16 REMARKS_12:

Repro16 REMARKS_12:

Draft16 REMARKS_13:

Reg16 REMARKS_13:

Repro16 REMARKS_13:

Draft16 REMARKS_14:

Reg16 REMARKS_14:

Repro16 REMARKS_14:

Draft16 REMARKS_15:

Reg16 REMARKS_15:

Repro16 REMARKS_15:

Draft16 REMARKS_16:

Reg16 REMARKS_16:

Repro16 REMARKS_16:

Draft16 REMARKS_17:

Reg16 REMARKS_17:

Repro16 REMARKS_17:

Draft16 REMARKS_18:

Reg16 REMARKS_18:

Repro16 REMARKS_18:

Draft16 REMARKS_19:

Reg16 REMARKS_19:

Repro16 REMARKS_19:

Draft16 REMARKS_20:

Reg16 REMARKS_20:

Repro16 REMARKS_20:

Draft16 REMARKS_21:

Reg16 REMARKS_21:

Repro16 REMARKS_21:

Draft16 REMARKS_22:

Reg16 REMARKS_22:

Repro16 REMARKS_22:

Draft16 REMARKS_23:

Reg16 REMARKS_23:

Repro16 REMARKS_23:

Draft16 REMARKS_24:

Reg16 REMARKS_24:

Repro16 REMARKS_24:

Draft16 REMARKS_25:

Reg16 REMARKS_25:

Repro16 REMARKS_25:

Draft16 REMARKS_26:

Reg16 REMARKS_26:

Repro16 REMARKS_26:

Draft16 REMARKS_27:

Reg16 REMARKS_27:

Repro16 REMARKS_27:

Draft16 REMARKS_28:

Reg16 REMARKS_28:

Repro16 REMARKS_28:

Draft16 REMARKS_29:

Reg16 REMARKS_29:

Repro16 REMARKS_29:

Draft16 REMARKS_30:

Reg16 REMARKS_30:

Repro16 REMARKS_30:

Draft16 REMARKS_31:

Reg16 REMARKS_31:

Repro16 REMARKS_31:

Draft16 REMARKS_32:

Reg16 REMARKS_32:

Repro16 REMARKS_32:

Draft16 REMARKS_33:

Reg16 REMARKS_33:

Repro16 REMARKS_33:

Draft16 REMARKS_34:

Reg16 REMARKS_34:

Repro16 REMARKS_34:

Draft16 REMARKS_35:

Reg16 REMARKS_35:

Repro16 REMARKS_35:

Draft16 REMARKS_36:

Reg16 REMARKS_36:

Repro16 REMARKS_36:

Draft16 REMARKS_37:

Reg16 REMARKS_37:

Repro16 REMARKS_37:

Draft16 REMARKS_38:

Reg16 REMARKS_38:

Repro16 REMARKS_38:

17 PRICE GROUP:

18 ESTIMATED TOTAL PRICE:

Page: 1

of: 2

Page_2: 2

of_2: 2

1 DATA ITEM NO_2: A002

2 TITLE OF DATA ITEM_2: Test/Inspection Report

4 AUTHORITY Data Acquisition Document No_2: DI-NDTI-80809B/T

Draft16 REMARKS_39:

Reg16 REMARKS_39:

Repro16 REMARKS_39:

Draft16 REMARKS_40:

Reg16 REMARKS_40:

Repro16 REMARKS_40:

Draft16 REMARKS_41:

Reg16 REMARKS_41:

Repro16 REMARKS_41:

Draft16 REMARKS_42:

Reg16 REMARKS_42:

Repro16 REMARKS_42:

Draft16 REMARKS_43:

Reg16 REMARKS_43:

Repro16 REMARKS_43:

Draft16 REMARKS_44: 1

Reg16 REMARKS_44: 1

Repro16 REMARKS_44:

Draft16 REMARKS_45:

Reg16 REMARKS_45:

Repro16 REMARKS_45:

Draft16 REMARKS_46:

Reg16 REMARKS_46:

Repro16 REMARKS_46:

Draft16 REMARKS_47:

Reg16 REMARKS_47:

Repro16 REMARKS_47:

Draft16 REMARKS_48:

Reg16 REMARKS_48:

Repro16 REMARKS_48:

Draft16 REMARKS_49:

Reg16 REMARKS_49:

Repro16 REMARKS_49: 1

Draft16 REMARKS_50:

Reg16 REMARKS_50:

Repro16 REMARKS_50:

Draft16 REMARKS_51:

Reg16 REMARKS_51:

Repro16 REMARKS_51:

Draft16 REMARKS_52:

Reg16 REMARKS_52:

Repro16 REMARKS_52:

Draft16 REMARKS_53:

Reg16 REMARKS_53:

Repro16 REMARKS_53:

Draft16 REMARKS_54:

Reg16 REMARKS_54:

Repro16 REMARKS_54:

Draft16 REMARKS_55:

Reg16 REMARKS_55:

Repro16 REMARKS_55:

Draft16 REMARKS_56:

Reg16 REMARKS_56:

Repro16 REMARKS_56:

Draft16 REMARKS_57:

Reg16 REMARKS_57:

Repro16 REMARKS_57:

Draft16 REMARKS_58:

Reg16 REMARKS_58:

Repro16 REMARKS_58:

Draft16 REMARKS_59:

Reg16 REMARKS_59:

Repro16 REMARKS_59:

Draft16 REMARKS_60:

Reg16 REMARKS_60:

Repro16 REMARKS_60:

Draft16 REMARKS_61:

Reg16 REMARKS_61:

Repro16 REMARKS_61:

Draft16 REMARKS_62:

Reg16 REMARKS_62:

Repro16 REMARKS_62:

Draft16 REMARKS_63:

Reg16 REMARKS_63:

Repro16 REMARKS_63:

Draft16 REMARKS_64:

Reg16 REMARKS_64:

Repro16 REMARKS_64:

Draft16 REMARKS_65:

Reg16 REMARKS_65:

Repro16 REMARKS_65:

Draft16 REMARKS_66:

Reg16 REMARKS_66:

Repro16 REMARKS_66:

Draft16 REMARKS_67:

Reg16 REMARKS_67:

Repro16 REMARKS_67:

Draft16 REMARKS_68:

Reg16 REMARKS_68:

Repro16 REMARKS_68:

Draft16 REMARKS_69:

Reg16 REMARKS_69:

Repro16 REMARKS_69:

Draft16 REMARKS_70:

Reg16 REMARKS_70:

Repro16 REMARKS_70:

Draft16 REMARKS_71:

Reg16 REMARKS_71:

Repro16 REMARKS_71:

Draft16 REMARKS_72:

Reg16 REMARKS_72:

Repro16 REMARKS_72:

Draft16 REMARKS_73:

Reg16 REMARKS_73:

Repro16 REMARKS_73:

Draft16 REMARKS_74:

Reg16 REMARKS_74:

Repro16 REMARKS_74:

Draft16 REMARKS_75:

Reg16 REMARKS_75:

Repro16 REMARKS_75:

Draft16 REMARKS_76:

Reg16 REMARKS_76:

Repro16 REMARKS_76:

17 PRICE GROUP_2:

18 ESTIMATED TOTAL PRICE_2:

Page_3: 1

of_3: 2

16 REMARKS Continued_2: Intentionally Blank

Page_4: 2

of_4: 2

A CONTRACT LINE ITEM NO:

B EXHIBIT: A

OTHER:

D SYSTEMITEM: C17/PSE/17G460199-1

E CONTRACTPR NO: FD2060-17-92232

F CONTRACTOR:

A CONTRACT LINE ITEM NO_3:

B EXHIBIT_2: A

G PREPARED BY: Julian Stevenson

AFLCMC/WLE; DSN 468-4168

H DATE: 16-Apr-18

J DATE:

3 SUBTITLE: Test Kit, Low Pressure - Fuel Drain Lines

6 REQUIRING OFFICE: AFLCMC/WLE (C-17 Engr)

5 CONTRACT REFERENCE:

7 DD 250 REQ: DD

8 APP CODE: A

9 DIST STATEMENT REQUIRED: D

10 FREQUENCY: One/R

11 AS OF DATE: See Blk 16

12 DATE OF FIRST SUBMISSION: See Blk 16

13 DATE OF SUBSEQUENT SUBMISSION: N/A

Text1: 1

Text2: 1

Text3: 1

a ADDRESSEE16 REMARKS: AFLCMC/WLE (C17 Eng)

a ADDRESSEE16 REMARKS_38:

a ADDRESSEE16 REMARKS_2: 235 Byron Street, Suite 19A

a ADDRESSEE16 REMARKS_3: Robins AFB, GA 31098

a ADDRESSEE16 REMARKS_4:

a ADDRESSEE16 REMARKS_5: E-copy

a ADDRESSEE16 REMARKS_6: Searchable Adobe PDF

a ADDRESSEE16 REMARKS_7: Email to:

a ADDRESSEE16 REMARKS_8: Julian.Stevenson@us.af.mil

a ADDRESSEE16 REMARKS_9: Vandy.Alderman.1@us.af.mil

a ADDRESSEE16 REMARKS_10:

a ADDRESSEE16 REMARKS_11: Digital Data

a ADDRESSEE16 REMARKS_12:

a ADDRESSEE16 REMARKS_13:

a ADDRESSEE16 REMARKS_14:

a ADDRESSEE16 REMARKS_15:

a ADDRESSEE16 REMARKS_16:

a ADDRESSEE16 REMARKS_17:

a ADDRESSEE16 REMARKS_18:

a ADDRESSEE16 REMARKS_19:

a ADDRESSEE16 REMARKS_20:

a ADDRESSEE16 REMARKS_21:

a ADDRESSEE16 REMARKS_22:

a ADDRESSEE16 REMARKS_23:

a ADDRESSEE16 REMARKS_24:

a ADDRESSEE16 REMARKS_25:

a ADDRESSEE16 REMARKS_26:

a ADDRESSEE16 REMARKS_27:

a ADDRESSEE16 REMARKS_28:

a ADDRESSEE16 REMARKS_29:

a ADDRESSEE16 REMARKS_30:

a ADDRESSEE16 REMARKS_31:

a ADDRESSEE16 REMARKS_32:

a ADDRESSEE16 REMARKS_33:

a ADDRESSEE16 REMARKS_34:

a ADDRESSEE16 REMARKS_35:

a ADDRESSEE16 REMARKS_36:

a ADDRESSEE16 REMARKS_37:

16 REMARKS Continued: See the attached example for information required to be on the cover page of the FATP.

Blk 7:

The Government will accept the Receiving Report through WAWF upon final delivery.

Blk 11/12:

The contractor shall submit the FATP 21 DAC.

Blk 14;

The FATP shall be submitted in searchable Adobe PDF format and submitted by Email.

Text4: 1

Text5: 1

Text6: 1

Text7: Blk. 4:

The First Article Test Plan (FATP) shall cover pre-production/First Article (FA) testing and documentation The FATP shall detail the means by which the contractor will satisfy the requirements of the item Technical Data Package (TDP) and any applicable requirements set forth in the related standards, processes and documents referenced therein. The FATP shall describe and/or list: 1) the means by which the contractor shall accomplish the requisite proof load, dimensional conformance, and functional tests called for in the TDP; 2) the plan to document the material and process certifications (BOM/TDP compliance) to include a table cross referencing the material and conformance of materials to applicable material standards shown in the Bill of Materials (BOM) and the detail part the material was used to manufacture; 3) the equipment/instruments to be used to perform the required inspections and tests; 4) the means by which the contractor ensures that all test/inspection instruments proposed/employed carry current, valid, traceable calibrations at the time of the test/inspection; 5) plan for photo documentation of all permanent item markings (ID plates, stenciling, branded labeling, etc. (as applicable by detail)). The FATP shall include text, tables, sketches, photos, etc. as applicable or required to address the above enumerated requirements. MIL-HDBK-831 may be used as a guide in preparing the FATP.

The DID shall be tailored as follows:

3b. "Applicable documents to include Government and Non-Government documents required to manufacture the First Article."

NOTE: Any changes to the FATP after approval must be coordinated with the technical authority approving the plan. All coordinating actions shall be processed through the contracting officer in accordance with (IAW) contracting regulations and public law.

NOTE: This item may have subassemblies that are designed to Specification Control Drawings (SCD). Those items shall be procured from the approved sources listed on the drawing when possible. If those items cannot be procured from the pre-approved sources, the contractor may design and build their own item IAW the specific SCD. The Contractor-made item shall be approved by the design control authority, Boeing, in order to maintain the quality and configuration of the part. The contractor must qualify IAW Boeing's procedures in order to be considered a source of supply for the subassembly.

Text8: Blk 4:

Contractor notification to the ACO and PCO of the First Article Test (FAT) and location is due 20 days prior to the start of testing. The First Article Test Report (FATR) shall cover pre-production/First Article testing and shall document conformance to the Technical Data Package (TDP) requirements and traceability of test and/or measurement equipment calibrations to accepted standards. The FATR shall include text, tables, sketches, photos, etc. as applicable or required. Tabulated data formats in the FATR shall conform to those approved in the FATP (CDRL A001) unless the format changes are coordinated through contracting by the technical authority. Photo documentation is required of all exposed permanent markings (ID plates, stenciling, cable banding, etc.) confirming conformance to the item TDP marking requirements. All text and/or numerical designations must be legible in photos (more than one photo may be required in some instances to document the adjacent texts). Traceability of calibration for all equipment and measurement tools is required. Copies of all calibration certifications and Bill of Materials (BOM) showing conformance of materials to applicable material standards shall be attached as an appendix to the FATR. MIL-HDBK-831A and the FATP may be used as a guide in preparing the FATR. See the attached document for information required to be on the cover page of the FATR.

The FATR will be certified by C-17 SPO Support Equipment Engineering (Ref MIL-HDBK-831, paragraph 4.1.4.2).

Blk 7:

The Government will accept the Receiving Report through WAWF upon delivery.

Blk 11/12:

The contractor shall submit FATR per contract schedule.

Blk 14:

The FATR shall be submitted in searchable Adobe PDF format and submitted by Email.

Check Box9: Yes
Check Box10: Off
	2018-04-16T14:52:02-0400
ROACH.MARCIA.C.1229969770

	2018-04-16T14:52:35-0400
ROACH.MARCIA.C.1229969770

File details come from the government source that posted it.