Attachments.pdf

TM-86-01Q 27 Oct 2017 1-01: AF TMSS Linear TMs

GUEE-18-007

Prepared by Michelle Corley, 406 SCMS/GUEE, 478-327-3697

Air Force Technical Manual Contract Requirements (TMCR) For

TOOL KIT, AIRCRAFT M

NSN 5180-01-389-4021

ATTACHMENT , TO CDRL SEQUENCE NUMBER , EXHIBIT

REQUEST FOR PROPOSAL/CONTRACT: FD2060-18-00623 , CLIN

Date: 5 April 2018

SECTION 1. TECHNICAL ORDER (TO) PROGRAM REQUIREMENTS

1. TMCR Tailoring. This TMCR has been tailored by the program office, including the associated tables, matrices and Specification/Standard Interface Records (SIRs). The Contractor may propose and submit, in writing, additional tailoring to the Technical Order Manager Agency/Agent (TOMA), Government Program Manager (PM), and Procuring Contracting Officer (PCO) for consideration. The tailored TMCR shall be attached to the Contract Data Requirements List (CDRL) for Technical Order (TO) delivery, and shall be included in the proposal as a separate exhibit, referenced in the proposal Statement Of Work (SOW). Proposals shall be compatible with the TOOL KIT, AIRCRAFT M Technical Order Concept of Operations (TO CONOPS) if prepared. Air Force (AF) TO Acquisition procedures, including procedures for tailoring this document, are found in TO 00-5-3, AF Technical Order Life Cycle Management, located at http://www.tinker.af.mil/Home/TechnicalOrders.aspx. A copy may also be obtained from the Program TO Manager. Any terms or procedures found in this document may be researched there.

2. TO Program Scope. The Contractor shall develop and deliver technical manuals in accordance with (IAW) this TMCR that supports the TOOL KIT, AIRCRAFT M requirements for technically usable manuals concurrent with the program’s TO CONOPS if prepared. The Contractor may recommend additional Section 2 tailoring to propose new TO types (Table 1) and source data and TO updates (Table

2) required to support the TOOL KIT, AIRCRAFT M program’s objectives.

3. Commercial Manuals. Contractors shall recommend the use of existing commercial manuals to the maximum extent possible without impairing program support objectives. All proposed commercial manuals are subject to Government review and approval.

3.1. The AF requests the ability to electronically store, print, distribute, update and decollate the commercial manual to allow for printing. Commercial manuals shall be delivered as Portable Document Format (PDF) unless otherwise specified.

3.2. Approved Commercial-Off-The-Shelf (COTS) Manuals shall be delivered with an Identifying TO Publication Sheet (ITPS), IAW MIL-PRF-32216, Performance Specification: Evaluation Of Commercial Off-The-Shelf (COTS) Manuals And Preparation Of Supplemental Data. All PDF files of commercial data shall be non-password protected to allow the AF to decollate the manual for printing.

3.3. If the proposed COTS data is found to be insufficient after review by the Government, the Contractor shall prepare supplemental data for the COTS manual as required IAW Military Standard (MIL-STD)-38784. If the COTS data cannot be supplemented sufficiently the Contractor may be tasked to develop new TM data IAW the applicable TMSS listed in Section 2, Table 1.

4. Technical Manual Specifications and Standards (TMSS) Tailoring(T). N/A

4.1. N/A

5. Subsequent TO/Data Requirements. When new TO requirements are identified the Contractor shall notify the Government utilizing DI-TMSS-80067C, Technical Manual (TM) Contractor Furnished Aeronautical Equipment or Contractor Furnished Equipment (CFAE/CFE) Notices, or approved Contractor formats. This process shall require Government review and approval of recommended additional requirements prior to developing additional data.

6. TO Development(T). TOs shall be written to a scope and depth of coverage to support the TOOL KIT, AIRCRAFT M operations and maintenance concepts.

6.1(T). N/A

6.2(T). N/A

7. TO Numbering(T). Contractors shall notify the Government, in writing, of manuals which require TO numbers. TO numbers are not required for manuals to be used exclusively by the Contractor’s own personnel. Requests for new TO numbers shall be submitted to the TOMA utilizing the TO numbering worksheet (Attachment 2, Request for Technical Order Number).

8. Data Rights. Contractors shall comply with 10 U.S.C. 2320 and cognizant Defense Federal Acquisition Regulation Supplement (DFARS) provisions and clauses in providing Unlimited Rights for all source data, TO publications, and TO updates prepared specifically for the contract. Government rights in data are specified in the DFARS, 252.227-7013, Rights in Technical Data, Noncommercial Items, 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, and 252.227-7015, Technical Data-Commercial Items. The Government shall be given Unlimited Rights for all Government-funded business rules (tailoring and application methods and procedures) and documented business processes developed under the contract for the purpose of TO development. For all data delivered to the Government with other than Unlimited Rights, the Contractor shall assert their data rights IAW DFARS 252.227-7017, Identification and Assertion of Use, Release, or Disclosure Restrictions. The Contractor shall pass through and enforce all requirements in this TMCR to all sub-Contractors.

9. Classification, Distribution, Destruction, Disclosure, Export Control Notices, and Cyber Security.

Offerors shall place the below statements on the title page of each new technical manual.

DISCLOSURE NOTICE - This information is furnished upon the condition that it will not be released to another nation without the specific authority of the Department of the Air Force of the United States, that it will be used for military purposes only, that individual or corporate rights originating in the information, whether patented or not, will be respected, that the recipient will report promptly to the United States, any known or suspected compromise, and that the information will be provided substantially the same degree of security afforded it by the Department of Defense of the United States. Also, regardless of any other markings on the document, it will not be downgraded or declassified without written approval of the originating United States agency.

DISTRIBUTION STATEMENT B -. Distribution authorized to U.S. Government Agencies Only (Proprietary Data) (Date TBD). Other requests for this document shall be referred to 406 SCMS/GUEE, Robins AFB, GA 31098. Questions concerning technical content shall be referred to

404 SCMS/GUEAB.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

HANDLING AND DESTRUCTION NOTICE - Comply with distribution statement and destroy by any method that will prevent disclosure of contents or reconstruction of the document.

NOTE: Distribution limitations will be determined on a case-by-case basis as TOs are developed, dependent upon TO content.

10. TO Quality(T). The Contractors shall ensure prepared TOs are: a) technically accurate and safe; b) written to a scope and depth of coverage to support the operations and maintenance concepts; c) properly classified and marked with export control and distribution limitation statements.

10.1. Initial Technical Order Guidance Conference (TOGC)(T). Working through the TOMA, the Contractor shall co-host and participate in a guidance conference for this effort. The TOGC will be held within 60 calendar days after contract award. The Contractor shall present a briefing on their interpretation of the basic contract, SOW/Performance Work Statement (PWS), CDRLs, (DIDs), MIL-SPEC, MIL-STD, SIRs, this document and the planned preparation and delivery of the TOs and related data.

10.2. In-Process Reviews(T). The Contractor shall participate and co-chair In-Process Reviews (IPR) of the data developed for this effort. In-Process Reviews are to ensure that data being developed as part of this effort is adequate and accurate and IAW contract requirements and cited specifications. The Contractor shall support IPRs with technical writers, engineers and QA personnel. IPRs will be held IAW TO 00-5-3 or as defined by the program office. With prior approval of the TOMA, IPRs may be combined.

10.3. TO Delivery Requirements for In-Process Reviews(T). Delivery requirements are contained in Section 2, Table 3 of the TMCR.

10.4. TO Certification. The Contractor shall certify that new TO procedures and data developed to support the program are accurate, adequate, current, safe, and usable for their intended purpose. The Government may witness the certification activities. The Contractor shall incorporate comments generated by the certification process into the TOs prior to submitting the TOs for verification. At the completion of the certification, the Contractor shall submit a letter to the TOMA through the Government PCO and PM stating that certification has been completed, the certification method used, and that any deficiencies identified during the process have been corrected. The Contractor will ensure all necessary changes and corrections to affected manuals are accomplished in time to meet contract delivery schedule requirements. The Contractor shall notify the Government at least 180 days prior to the need date of any Government Furnished Information/Government Furnished Equipment (GFI/GFE) required to perform certification tasks. TO 00-5-1 and TO 00-5-3 shall be referenced for additional information on TO Certification requirements.

10.4.1. The Contractor shall propose opportunities to perform TO certification activities in conjunction with Government verification IAW TO 00-5-3, where applicable.

10.5. Verification Support(T). The Contractor shall support Government verification activities as required by the TOMA and the program Technical Order Life Cycle Verification Plan (TOLCVP).

Contractor verification support will consist of on station technical writing and engineering support as required.

10.6. TO Prepublication Reviews (PPR)(T). N/A

10.7. Technical Data Assessment (TDA)(T). N/A

10.7.1. MIL-SPEC (SGML) TO Data(T). N/A

10.7.2. Error Resolution(T). N/A

11. TO Delivery. TO file delivery requirements are located in Section 2, Table 3 of this document.

11.1. MIL-SPEC (SGML) Tagged Files(T). N/A

12. Source Data Maintenance(T). Contractors shall maintain accuracy, currency and configuration of TO source data, to include GFI, throughout the contract period of performance.

13. TO Maintenance(T). N/A

14. Schedules(T). Any changes to the TM Schedule and Status after the TO Guidance Conference shall be coordinated with and approved by program TOMA and PCO.

15. Time Compliance Technical Orders (TCTOs)(T). N/A

15.1(T). N/A

15.2(T). N/A

15.3(T). N/A

15.4(T). N/A

16. PROGRAM SPECIFIC REQUIREMENTS(T).

16. PROGRAM SPECIFIC REQUIREMENTS.

a. The Offeror shall develop and deliver new MIL-SPEC technical manuals IAW Section 2, Table 1, covering the:

1) Operation and Maintenance Instructions Manual

2) Stand Alone Illustrated Parts Breakdown (IPB)

3) Combined Operation and Maintenance Instructions Manual with combined IPB

4) Overhaul Instructions Manual

5) Combined Operation, Maintenance, and Overhaul Instructions Manual.

6) COTS manuals shall meet the requirements of paragraph 3 and sub-paragraphs. (Sample

Government Purpose License Agreement provided in attachment 4)

b. The Offeror shall develop Updates to the manuals listed in Section 2, Table 2 in the form of:

1) Formal change pages with backup pages and a combined manual with the change interfiled.

2) Source Data in the form of AFTO Form 158 comments (See attachment 7).

3) Source Data in the form of Unnumbered Operational Supplement.

4) Revisions to existing manuals.

c. The manual(s) shall be developed using the latest version of the development specifications listed in Table 1 and 2 of this document. Data delivered for this contract shall be a combination of paper based documents and digital files.

d. SGML files shall be reviewed by the Air Force during the development process to ensure compliance with the approved DTDs. The contractor shall submit copies of their SGML Instance, PDF file of their SGML Instance and separate graphics files use with the SGML Instance for each In-Process review.

e. For Graphics formats, see “Graphics Format Recommendations” attachment 1to this document, (page 11). These recommendations provide wide latitude for developing and delivering graphics. The Contractor shall select one method from these recommendations to prepare and deliver all graphics files. Graphic resolution shall be a minimum of 300 DPI. Graphics files shall be delivered as separate files regardless whether they are embedded in the documents or not. Digital photographs (halftones) shall NOT be used. All graphics shall be line artwork.

f. In-Process reviews shall be held at the 35% and 70% completion point for each manual under development. Sample In-Process Completion tables are provided in Attachments 6 & 7.

g. Comments generated during ALL development reviews shall be incorporated before scheduling the next development review, for example 35% IPR comments shall be incorporated before scheduling the 70% IPR. The Contractor shall provide technical and engineering personnel to assist Air Force personnel during the development reviews and Verification.

NOTE: Contractors are responsible for selecting SGML and composition tools for this program.

AF DTDs will work with most COTS SGML editing systems (except Framemaker) however, the FOSIs were developed to work with Datalogic Composing software ONLY. If the Contractor wishes to use any other composing software product, the Contractor is responsible for ensuring all formatted outputs are compatible with the DTL specification listed in Section 2, Table 1 of this document. Structured Framemaker files are unacceptable and shall not be submitted as an SGML delivery to the Air Force. The Air Force DOES NOT profess to recommend one software product over another. Contractor’s are solely responsible for software selection.

SECTION 2. TM TYPE AND DELIVERY REQUIREMENTS

NOTES:

Mark the TM Type Selection Tables indicating the applicable TO types and related specifications.

(NEW DEVELOPMENT) LINEAR TM TYPE (PUBLICATION) SELECTION TABLES.

TABLE 1

TMSS REQUIREMENTS FOR THE TOOL KIT, AIRCRAFT M Program (System/Component)

Title or Type of Manuals Specification Required

1. Commercial Manuals (Evaluate according to MIL-PRF-32216)

TABLE 2

SUSTAINMENT/MODIFICATION UPDATES TM TYPE SELECTIONS

N/A

TABLE 3 - LINEAR TM DELIVERY REQUIREMENTS

FOR

TOOL KIT, AIRCRAFT M

(System/Item)

NOTES:

For Paper media delivery indicate required quantity For all other media types indicate (Y)es or (N)o TCTO requirements are specified in the contract vehicle approving the TCTO.

If “Other” is selected, define media type and quantities: ________________

DELIVERY SCHEDULE

Event Number of days data required prior to event In Process Review(s) (30 Days)

Verification

( Days)

Prepublication Review

( Days)

Final TO Distribution

45 Days)

Enter physical mailing address, electronic delivery location or web access point

406 SCMS/GUEE

ATTN: Michelle Corley 235 Byron St., Suite 19A Robins AFB, GA 31098-1670

Final delivery due 30 days prior to production hardware delivery to USAF.

Paper/

SGML/

IPDF / Y

XML /

Other/

Paper/

SGML/

IPDF /

XML /

Other/

Paper/

SGML/

IPDF /

XML /

Other/

Paper/

SGML/

IPDF / Y

XML /

Other/

Total PDF Copies Required: 1 1

SECTION 3.

SPECIFICATION/STANDARD INTERFACE RECORDS (SIRS)

ATTACHMENT 1

Graphics Format Guidelines

ATTACHMENT 2

REQUEST FOR TECHNICAL ORDER NUMBER

1. *PRIME SYSTEM APPLICATION (If Applicable or N/A)_______________________________

2. *CONTRACT NUMBER/PURCHASE REQUEST (PR) NUMBER: _____________________

3. *MISSION DESIGN SERIES/NOMENCLATURE (Name Of Equipment) __________________

4. *FEDERAL STOCK CLASS:_______________________________________________________

5. *PART NUMBER(s):______________________________________________________________

6. *NSN/FSN: (or temp NSN) __________________________________________________________

7. *PUBLICATION TYPE (Opn & Maint with IPB, Overhaul, WUC, IPB, LOAP, etc.)

8. *SUGGESTED TECHNICAL ORDER NUMBER:_____________________________________

9. *RECOMMENDED TITLE OF MANUAL (Leave Blank if Classified) ____________________

10. *CLASSIFICATION OF MANUAL: ________________________________________________

11. *CLASSIFICATION OF TITLE: ___________________________________________________

12. *KIND OF EQUIPMENT (Airborne / Ground / Not Applicable):___________________________

13. *TEST EQUIPMENT? Yes / No

14. PROGRAM ELEMENT CODE (PEC): ________________________________________________

15. LEAD COMMAND: _______________________________________________________________

16. DOES MANUAL EXIST FOR SAME/SIMILAR EQUIPMENT? Yes / No

17. EXISTING MANUAL TO NUMBER: _________________________________________________

18. COMMERCIAL OFF THE SHELF (COTS) ITEM: Yes / No

19. CONTRACTOR INFORMATION: (If Applicable)

a. NAME OF VENDOR: _____________________________________________________

b. ADDRESS: _____________________________________________________________

c. MANUFACTURER'S CODE: ______________________________________________

d. POINT OF CONTACT: ____________________________________________________

20. FOREIGN MILITARY SALES (FMS) YES ___ NO ____ (If YES, complete item 21)

21. COUNTRY CODES (For CSTO/FMS manuals): (See TO 00-5-19) __________________________

22. COMMENTS:______________________________________________________________________

* = Mandatory Field

Attachment 3

Attachment 4

Sample Government License Agreement

Contractor’s Letter Head Date

From: Company Name

To: 406 SCMS/GUEE 235 Byron St., Suite 19A Robins AFB, GA 31098-1670

Subject: Government License Agreement

NAME OF CONTRACTOR assigns to the U.S. Government under contract XXXXX-XX-X-XXXX, Government License Rights, which allow for the electronic storage, use, printing, release and/or disclosure of the technical data contained herein. These rights extend to U.S. governmental agencies only and may not to be sold, disclosed or otherwise provided to any other entity/entities outside of the U.S. Government without written permission from the Original Equipment Manufacturer (OEM). This license shall remain in effect for as long as the equipment cited in the technical manual remains in service and under government control and usage, after which this license is revoked.

Signed and dated by the contractor

Sample: Unlimited Rights GPLA

NAME OF CONTRACTOR assigns to the U.S. Government under contract XXXXX-XX-X-XXXX, Unlimited License Rights to, use, modify, reproduce, release, perform, display, or disclose technical data for (xxxxx enter hardware item or PN). This license shall remain in effect for as long as the equipment cited in the technical manual remains in service and under USG control and usage, after which this license is revoked.

Signed and dated by the contractor

(NOTE: Limited Rights license may be tailored to include FMS customers if OEM has no objections.)

ATTACHMENT 5

IPR Completion Percentage Guide General Style & Format manuals

ATTACHMENT 6

Sample Work Package Format IPR Completion Chart

ATTACHMENT 7

AFTO FORM 158

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20601800623-00 VERSION: 2

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL-STD-2073-1 / No Packaging Available MIL B

ITEM(S):

5180OSL180B7F

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

UNIT PACK

LENGTH

UNIT PACK

WIDTH

UNIT PACK

DEPTH

UNIT PACK

CUBE OPI

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

Page 1 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 02 Jul 2018

PACKAGING REQUIREMENTS

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAB MIL-STD-2073-1 / No Packaging Available MIL B

ITEM(S):

5180013894021

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

UNIT PACK

LENGTH

UNIT PACK

WIDTH

UNIT PACK

DEPTH

UNIT PACK

CUBE OPI

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Williams, Cedric E

PHONE NUMBER:

478-397-3490 / 497-3490

SIGNATURE:

//SIGNED//Williams, Cedric E

DATE:

18180 - 29 JUN 2018

Page 2 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 02 Jul 2018

ENGINEERING DATA LIST

DATE:

02 APR 2013

REVISION: 1 *HISTORY*

CAGE:

77445

PAGE:

NSN:

5180013894021

DATA TECH:

McLeod, Keith E

END ITEM:

SUPPORT EQUIPMENT

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

UNITED TECHNOLOGIES CORPORATION

REFERENCE NUMBER:

PWA57810

NOUN:

TOOL KIT,AIRCRAFT M

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 77445 PWA57810 H S D TOOL SET

L 77445 PWA397 J S D CLASSIFICATION OF

CHARACTERISTICS

McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA16 BC S D WELDING McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA57653 M S D TOOL SET McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA57600 D S D PULLER McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA55938 S C ROD ASSY McLeod, Keith E 02 APR 2013

C/O FROM PWA57600.

NAME: DATE:

L 77445 PWA57525 C S D PULLER McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA57809 E S D ADAPTER McLeod, Keith E 02 APR 2013

C/O FROM PWA57810.

NAME: DATE:

L 77445 PWA57528 D S D ADAPTER McLeod, Keith E 02 APR 2013

C/O FROM PWA57809.

NAME: DATE:

L 98752 200415485 C S A GENERAL ENGINEERING

NOTES

McLeod, Keith E 02 APR 2013

1, 3, AND 12 APPLY.

NAME: DATE:

STANDARD ENGINEERING TEXT

McLeod, Keith E 02 APR 2013

For general engineering notes, see document number 200415485.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 1EDL Version 1Generated by PRPS using Jasper Reports on 02 Jul 2018