17-30776_SOW.pdf

STATEMENT OF WORK (SOW)

FOR

SET-UP CALIBRATION AND

FAMILIARIZATION FOR

U306270 LABMASTER UNIVERSAL (Model 175) NSN 5220-01-552-

0751, WITH 20" OPTIONAL PROBES

TASK ORDER XXXX

25 August 2016

1. BACKGROUND

Subject item is being procured as a result of a definitization conference for support of Romania’s F-16 Security Assistance Metrology Program. Romania Military Metrology Center (RMCC) requested to have this vendor offered training to be included with the acquisition of the item. The item is currently in the procurement stages. It will be delivered to the F16 CONSOLIDATION POINT, W1BG DLA DISTRIBUTION DEF DIST DEPOT, SUSQUEHANNA BLDG 891, New Cumberland PA 17070-0000, prior to being shipped to country where it will be delivered to the RMCC in Bucharest Romania. The set-up and Familiarization shall be performed at the RMCC and funded as part of the item procurement under case RO-D-QAH/039 and within 120 days after asset delivery.

2. APPLICABLE DOCUMENTS.

PRATT & WHITNEY Labmaster Universal Statement of Work Dated 23 August 2016

3. ROMANIA REQUIREMENTS CASE RO-D-QAH/039

3.1. Instrument Setup and Familiarization

3.1.1. The contractor shall perform on site turnkey system installation/checkout and provide three days of Familiarization with U306270 Labmaster Universal (Model 175) NSN 5220-01-552-0751.

3.1.2. Topics include: Mastering Routine, Dimensional Metrology measuring applications such as thread measuring, plug, pin, gage block, dial indicator, end standard, ring gage, taper gage.

3.1.3. Familiarization Include: Instrument training, basic dimensional Metrology training, software Training, and hands-on instrument training using the U306270 Labmaster. The work should be completed within seven calendar days.

3.1.4. Attendees (trainees) will be a minimum of 5, maximum of 10 either Electronic Technicians or Electronic Engineers

3.2. TRAVEL: Contractor will arrange travel and accommodations. Transportation to and from hotel/airport to end user facility can only be provided by host country if a representative of the USA Government is included in the party.

3.3. EXPORT REQUIREMENTS: The contractor shall be responsible for obtaining any required Technical Assistance Agreements, Manufacturing License Agreements, and/or Export Licenses if required for the deliverables specified in this SOW.

3.4. SHIPMENT PROCEDURES: Asset will be shipped in accordance with FMS government shipment guidance.

3.5. SECURITY CLEARANCE: N/A

4. WORK SITUATION

4.1. Task Order Location:

RMCC, UM 02550 L,

TEASCULUI STREET NO 2,

042098 BUCHAREST DISTRICT 4 ROMANIA, TEL 40 213 122 776

4.2. Acceptance of services performed will be by Georgescu Laurentiu, Deputy Program Director, Romania TEL 40 724 178 925

4.3. Points of contact: USAF POC is Felipe I. Concha, AFLCMC/WNMMI (AFMETCAL) DSN 366-5072, commercial (740) 788-5072; In Country POC is Col. Grigoras Vasile TEL 40 724 178 925

5. CERTIFICATES

5.1. The contractor shall provide a Certificate of Course Completion to each student.

6. REPORTING

6.1 The contractor shall provide the Government program manager via electronic media with a status report of personnel attending the familiarization presentation at task order location (para 4.1).