ELOP_SOW.pdf

STATEMENT OF WORK (SOW)

FOR

ELOP HUD TPS PRODUCTION

7/21/2017

Revision 01

Prepared By

516 SMXS/MXDPE

ATE Software Maintenance Squadron Hill Air Force Base, UT 84056

DISTRIBUTION D: Distribution authorized to department of defense and U.S. DOD contractors only:

administrative or operational use. 2015 April 06. Refer other requests for this document to 516 SMXS/MXDEE, Hill AFB, UT 84056.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DISCLOSURE NOTICE: This document will not be disclosed to any person or organization outside of the organizations identified on the approval sheet of this SOW.

APPROVAL SHEET

11/2/2017

X Kent Davis, TPM

Signed by: DAVIS.KENT.L.1273599084

TABLE OF CONTENTS

1 PURPOSE AND SCOPE

2 REQUIREMENTS

2.1 Technical Requirements

2.1.1 Part Numbers and Quantities to be produced

2.1.2 Period of Performance

2.1.3 Delivery Address:

3 ASSUMPTIONS AND GROUND RULES

3.1 Assumptions

3.2 Ground Rules

4 ACRONYMS

DOCUMENT CHANGE HISTORY

Revision Date Point of Contact Change Number: Title: Description

00 1/12/2017 Charlotte Beeman Original

01 7/21/2017 Kent Davis Update for contracting

02 10/30/2017 Kent Davis/May-Lin

Robbins

Removed PAL Cable P/N 32-01426-01

1 PURPOSE AND SCOPE

The purpose of this Statement of Work (SOW) is to describe the effort required by the

Contractor/Supplier for production of items listed in the parts list which make up the ELOP HUD TPS.

2 REQUIREMENTS

2.1 Technical Requirements

2.1.1 Part Numbers and Quantities to be produced.

The following parts list shall be produced and assembled by the Supplier for the quantity shown according to the drawing number.

Table 1

Part List

Line

Item

Part Number Description Qty. Notes: Drawing

Number

1 201126311-30 ITA Set, ELOP 1 Includes production of all subassemblies.

201126311

2 201226694-10 Image Sensor Kit 1 Camera Parts can be obtained through RMA

Electronics (Cage code

1S5J4).

201226694

3 201306707-10 Firmware Cable 1 Spec DWG 2013067017 201306707

4 201610028-10 Translator Fixture Kit 6 This is in addition to the one included with P/N:

201126311-30

201610028

5 16U4722-7 Housing Assembly 1 This is in addition to the one that is included in

201126311-30

16U4722

6 16U4722-11 Cover 1 This is in addition to the one that is included in

201126311-30

16U4722

2.1.2 Inspection

All test and inspection activities will be performed by the government (516 SMXS/MXDPE).

No QA will be required by the vendor prior to shipment.

2.1.3 Period of Performance

Line Items should be delivered within 6 months of award.

2.1.4 Delivery Address:

C/O: Kent Davis

6137 Wardleigh Rd.

Hill AFB, Utah 84056

3 ASSUMPTIONS AND GROUND RULES

3.1 Assumptions

a. The drawings are obtainable via JEDMICS.

b. GFP will be provided for the following parts (see attached GFP_Doc.pdf):

a. Connector Retainer Standoff P/N 16VA189-3A

i. Used in drawing number 201126312, Interface Test Adapter Assembly.

b. Flexible Circuit P/N 16U4492-801,

i. Used in drawing number 201126312, Interface Test Adapter Assembly.

3.2 Ground Rules

a. Requirement changes will be managed via a modification request through the PCO.

b. Suitable Substitution for parts in drawings will be managed via a modification request through the PCO.

4 ACRONYMS

ATE Automatic Test Equipment

DR Design Review

ECP Engineering Change Proposal

EDP Engineering Data Package

ELOP Electro Optical

ESD Electrostatic Discharge

GFP Government Furnished Property

HUD Heads Up Display

ITA Interface Test Adapter

JEDMICS Joint Engineering Data Management and Information Control System

LRU Line Replaceable Unit

OC-ALC Oklahoma City Air Logistics Complex

OO-ALC Ogden Air Logistics Complex

PCO Procuring Contracting Officer

PMR Program Management Review

SOW Statement of Work

TIM Technical Interchange Meeting

TPS Test Program Set

TRD Test Requirements Document

UUT Unit Under Test