Scissor_Lift_product_description.pdf

U.S Air Force

Product Description and Specifications for Explosion Proof Scissor Lift

POC: Vergel Palacio (801) 777-6848 6/14/2016

Description and Specifications for Explosive Proof Scissor Lift

The 709th Paint and Blast are in need of an Explosive Proof Scissor Lift that is designed for Class 1, Division 1, hazardous environments. It has been deemed unsafe by safety inspectors to be using the rolling ladders to work on missile trailers that are 16-20 feet tall for example. It needs to be a self-propelled, battery powered lift that doesn’t require an external air source.

Explosive Proof Scissor Lift Specifications:

Must be rated Class 1, Division 1 (approved and certified to be used inside paint spray booths)

Must be explosive proof, battery powered and self-propelled

Must have a working height of 25 feet

Must have a raised platform height of 19 feet

The platform size inside needs to be approximately 24 x 65

Weight capacity of at least 500 pounds

Needs the deck extensions to be 3 feet

Needs to have 4 x 6V 250 amp rechargeable batteries

Needs to have a 20 amp automatic SCR Charger

Needs to have 25% grade ability

Must come with operator and maintenance manuals

Training for at least 10 employees

Additional Gate

CONTRACTUAL REQUIREMENTS

Delivery:

The contractor shall deliver the equipment to the following address located at Hill Air Force Base:

309 MXSG

5832 H Ave.

Bldg. 843 Bay J

Attn: Vergel Palacio

Hill AFB, Utah 84056-5825

Warranty:

The contractor shall provide any OEM pass through warranty and standard commercial warranties applicable to the products being purchased at no cost. This shall apply to new, refurbished, and remanufactured equipment.