Description_and_Specifications_for_Utility_Vehicle_27_July_2015_-_Copy.pdf

U.S Air Force

Product Description and Specifications for 4 x 4 Utility Vehicle

Jill Smith 7/27/15

Utility Vehicle Description and Specifications

New Utility Vehicle’s to be used for the new MXSG Production Support Branch for the 11 plus

Tool Monitors, Tool Inspectors and Tool Trainers to inspect, deliver/retrieve tools to numerous facilities all over the base.

Vehicle needs to include the following specifications:

Type: 3-cylinders, 4-cycle, diesel, OHV. Displacement of 904 to 1125 and 24 to 25 horsepower with a liquid cooled motor with speed from 0-25 miles per hour.

Parking brake and 2-point seat belts included

Vehicle factory installed unibody A/C and heated cab. The fully enclosed cab with air conditioning, defroster, and heating systems as standard equipment will be used for the transportation of tools and tool monitors around to the various locations on base.

Windshield of tempered glass complying with 49 CFR Part 571.500 (ANSI/SAE Z26.1-

1996)

Require color orange, or other bright color as it is also operated at night and orange is a highly visible color for safety concerns/reasons.

Required add-ons to comply with AFI24-302 (49 CFR Part 571.500)

Turn Signal/Hazard Lights

Back Up Alarm

Visor

Mirrors

Reflectors for rear and sides of bed (to be added after delivery)

CONTRACTUAL REQUIREMENTS

Delivery: 60 days.

The contractor shall deliver the equipment to the following address located at Hill Air Force

Base:

309 MXSG Production Support Branch

5832 H. Ave.

Bldg. 843 Bay G

Attn: Nathan Dean

Hill AFB, Utah 84056-5825

Warranty:

A minimum 12 month standard warranty on the machines.