AIRSPEC.pdf

9/05/20018

AIRMUNITION SPECIFICATION

FD2020-19-50019 USAF, FD2020-19-50020 FMS

NSNs:

1377-01-055-9964ES, 1377-01-056-8642ES, 1377-01-056-8643ES, 1377-01-056-8644ES,

1377-01-073-9444ES, 1377-01-073-9445ES

Alt. NSNs:

1377-01-522-6385ES, 1377-01-522-6391ES, 1377-01-522-6387ES, 1377-01-522-6389ES,

1377-01-522-6388ES, 1377-01-522-6393ES

Kit NSNs:

1377-01-515-0934ES & 1377-01-515-0935ES

1. The contractor shall provide an advanced Report of Shipment (REPSHIP) to the consignee no later than 24 hours prior to the shipment arrival, and for ammunition shipments no later than two hours after shipment departure. A (REPSHIP) shall include all the following data in accordance with Attached REPSHIP.

2. Contractor shall contact their nearest Defense Contract Management Agency (DCMA) Office for transportation guidance and assistance for all Foreign Military Sales (FMS) deliveries prior to shipment; and ensure that the DCMA provides one information copy of completed Notice of Availability (NOA) including FMS case and requisition numbers by mail to:

AFLCMC/EBHMB Attn: FMS Transportation 6043 Elm Lane, Hill AFB, UT 84056-5819, or Fax to: (801) 777-1089 or Email to ooalc.gacp.transportation@us.af.mil.

3. Department of Defense Identification Code (DODIC):

1377-01-055-9964ES/1377-01-522-6385ES: ME52

1377-01-056-8642ES/1377-01-522-6391ES: ME53

1377-01-056-8643ES/1377-01-522-6387ES: ME54

1377-01-056-8644ES/1377-01-522-6389ES: ME55

1377-01-073-9444ES/1377-01-522-6388ES: ZY46

1377-01-073-9445ES/1377-01-522-6393ES: ZY47

4. Ammunition Data Cards (ADC) shall be filled out; input in accordance with Attachment 2, Statement of Work – Ammunition Data Cards; and state quantity/serial number of lot acceptance test units in the remarks block. One hard copy of the ADC shall accompany shipments to each shipping location. CDRL (DI-MISC-80043B)

5. Items shall be marked in accordance with CAD/PAD Item Marking Instruction Version 1.3, 19 Apr 2016, reference attachment.

mailto:ooalc.gacp.transportation@us.af.mil

6. Hazard Classification Information:

NSN 1377-01-055-9964ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX1988080307 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.0067 NEW Unit of Measurement: lbs.

NSN 1377-01-056-8642ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2008020509 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.006700 NEW Unit of Measurement: lbs.

NSN 1377-01-056-8643ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX1988080311 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008300 NEW Unit of Measurement: lbs.

NSN 1377-01-056-8644ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX1988080312 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008300 NEW Unit of Measurement: lbs.

NSN 1377-01-073-9444ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX1988080335 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008200 NEW Unit of Measurement: lbs.

NSN 1377-01-073-9445ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX1988080336 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008200 NEW Unit of Measurement: lbs.

NSN 1377-01-522-6385ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100193 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.007000 NEW Unit of Measurement: lbs.

NSN 1377-01-522-6391ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100199 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.007000

NSN 1377-01-522-6387ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100200 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW):

NEW Unit of Measurement: lbs. 0.008800

NSN 1377-01-522-6389ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100194 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008800 NEW Unit of Measurement: lbs.

NSN 1377-01-522-6388ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100195 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008800

NSN 1377-01-522-6393ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100196 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.008800

NSN 1377-01-515-0934ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100197 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.017600 NEW Unit of Measurement: lbs.

NSN 1377-01-515-0935ES

Hazard Class/Division: 1.4 Compatibility Group: S DOT Marking/EX Number: EX2014100198 DOT Shipping Labels: EXPLOSIVE 1.4S UN Serial No.: 0367 Proper Shipping Name: Fuzes, Detonating Net Explosive Weight per item (NEW): 0.031600 NEW Unit of Measurement: lbs.

NEW for all packaging/shipping documents shall reflect the NEW identified above per JHCS or IHC. If NEW is altered to adjust item performance and is greater than the weight listed, an ECP shall be submitted to the government prior to manufacturing or at least 60 days prior to shipping and shall include the SDS (formerly MSDS) and applicable supporting documentation.

7. All Engineering Change Proposals (ECPs), Notice of Revisions (NORs), and Request For

Variances (RFVs formerly RFD/RFWs) affecting the approved product baseline configuration, acceptance test procedures, or manufacturing process of any item(s) on this contract shall be in accordance with EIA-649-B. Major ECPs with NORs and Critical/Major RFVs shall be submitted to the responsible Government Engineering Authority for review/disposition by CCB.

Minor/Administrative ECPs with NORs and Minor RFVs shall be processed by the:

COGNIZANT GOVERNMENT ENGINEER

ECPs -- CDRL (DI-SESS-80639D) NORs – CDRL (DI-SESS-80642D) RFVs – CDRL (DI-SESS-80640D)

Distribution Statement: B, Reason: Administrative or Operational (ref. DoD 5230.24)

8. The contractor shall provide the Lot Acceptance Test Plan (LATP/ATP) for this item(s) in accordance with the contractual data requirements. No changes to previously approved government Acceptance Test Plans shall be made without prior government approval. The Lot Acceptance Test Plan provided must be approved by HAFB engineering at least 90 days prior to commencement of Lot Acceptance Testing allowing for 30 days approval time after submission.

CDRL (DI-QCIC-80553A)

9. Lot Acceptance Test Requirements are IAW latest Government approved ATP- Contractor.

10. The contractor shall furnish a Lot Acceptance Test/Inspection Report in the WAWF system.

CDRL: (DI-NDTI-80809B)

11. LOT ACCEPTANCE TEST: In the event of an end item failure, the contractor shall notify the

PCO/ACO and Air Force Engineering Organization within 1 business day.

Air Force Engineering Organization: AFLCMC/EBHJ Organization E-mail: Quinn.Tidwell@us.af.mil

12. In the event of test failure(s), a Failure Analysis and Corrective Action Report with proposed corrective actions/recommendations is required. CDRL: (DI-SESS-80255A)

13. If Hexanitrostilbene (HNS) explosive material is used in the manufacture of this item, the HNS shall meet the requirements of Government Document WS5003F (or latest revision), Purchase Description of HNS Explosive; and maximum particle size shall not exceed 250 microns.

14. The age of the energetic materials and components (i.e. ALL explosives, propellants, pyrotechnics, cartridges, and/or initiators) used in the manufacture of these items or sub-components shall not exceed 24 months based on the original manufacturing date. All energetic materials and components must be traceable to the original DoD qualified manufacturer and compliant with the ITAR part 120 and 121 (http://www.pmddtc.state.gov/regulations_laws/itar.html).

15. Raw (non-blended) ingredients & materials used in blended/mixed energetic materials such as, but not limited to: fuels, oxidizers, binders, curatives, sensitizers, plasticizers, stabilizers etc., shall not exceed 24 months since date of manufacture and comply with original manufacture’s Specification or MIL-STD. The government may waive the energetic and constituent material requirements listed above or portions thereof, on a case-by-case basis (when acceptable to the government) provided the contractor furnishes all details of the reason for the waiver and the age, lot numbers, traceability, and other pertinent information/ test data and Certificate of Analysis/ Conformance (COA/COC) of the subject materials or components. The waiver shall be submitted as a RFV and may be subject to, but not limited to, conditions such as sensitivity testing, stabilizer and analysis and/or dehumidification at vendor’s cost; therefore, vendor must plan accordingly. RFV not required provided vendor has approved energetic material and constituent management and recertification plan approved by HAFB technical authority for this specific contract and contract is executed with materials in compliance with said plan.

Recertification test data for materials shall be provided by vendor upon request at no additional charge to the government. All raw ingredients, materials and components must be traceable to the original DoD qualified manufacturer and compliant with the ITAR part 120 and 121.

http://www.pmddtc.state.gov/regulations_laws/itar.html

16. Percussion primers shall have been certified /recertified by performing sensitivity (all- fire/no fire) and dud testing per applicable specification within the past 24 months unless they are Navy certified and have a 2 year certification. Primers shall be stored in a temperature and humidity controlled environment and in a sealed container with desiccant from time of primer manufacturing, shipping, storage and through final installation in end item. All primers shall be X-rayed in top and side views for critical defects prior to use.

17. This item is designated as a Critical Safety Item (CSI). Documentation for critical characteristics may be found in the contract, TDP, assembly/inspection procedures or QALI.

MRB approval authority shall be retained by government engineer.

18. Approval from government engineer is required prior to rework and repair of nonconforming material (see Attachment Clause ES7034)

19. First Article Test/Inspection Report IAW AFMC form 260 (FAT-Contractor Test)

CDRL (DI-NDTI-80603A)

20. Vendor shall submit a bill of Materials (BOM) for Diminishing Manufacturing Sources and Material Shortages (MDSMS) Management. CDRL (DI-PSSS-81656A)

21. Contracts involving ammunition and explosives (AE) will contain:

- DFARS Title 48 Part 252.223-7002, Safety Precautions for Ammunition and Explosives

- DFARS Title 48 Part 252.223-7003, Change in Place of Performance - Ammunition and Explosives Additionally, if the scope of work includes air shipment of explosives, the safety specification should require contractor compliance with:

- AFMAN 24-204(I), Preparing Hazardous Materials for Military Air Shipments