Engineering_instructions.pdf
PDF 64 KB Posted
- Attached to
- F-16 Viper MLV CFM Federal contract opportunity
- Solicitation number
- FA821224Q0007
About this file
This document provides engineering data requirements for the manufacture of a compact flash memory card for use in F-16 aircraft. The card must have a minimum of 490 MB of available space after flash and comply with Military Standard 130 for marking. The specifications and standards referenced in the document and control drawings must be followed without deviation unless approved by the cognizant engineering activity. Acceptable sources for materials must also be approved. The supplier must implement and document a counterfeit prevention plan in accordance with Data Item Description DI-MISC-81832 to prevent counterfeit electronic parts from entering the DoD supply chain.
The related federal contract opportunity is for compact flash memory cards to hold the VIPER aircraft operating system, with aluminum casings. The solicitation was issued by the Air Force Sustainment Center within the Air Force Materiel Command for use in F-16 aircraft.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Transportation.pdf | ||
| FA821224Q00070002.pdf | ||
| packaging..pdf | ||
| 807 (updated).pdf | ||
| FA821224Q00070001.pdf | ||
| SOW.pdf | ||
| Transportation.pdf | ||
| Manufacturing_Qualifications.pdf | ||
| 807.pdf | ||
| FA821224Q0007.pdf | ||
| Engineering_Data_List.pdf | ||
| CDRL.pdf | ||
| Packaging.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COMPACT FLASH MEMORY CARD. F-16
2. PART NUMBER:
8395969-1
3. NATIONAL STOCK NUMBER:
7025-01-529-4119WF
PREPARED BY:
KACEY ABBOTT
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
4 DECEMBER 2023
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130.
8. CARD MUST HAVE A MINIMUM OF 490 MB OF AVAILABLE SPACE AFTER FLASH.
9. COUNTERFEIT PREVENTION PLAN (CPP). CONTRACTORS THAT SUPPLY ELECTRONIC PARTS OR SYSTEMS THAT CONTAIN ELECTRONIC PARTS SHALL ESTABLISH POLICIES AND PROCEDURES TO AVOID, DETECT, MITIGATE AND DISPOSITION COUNTERFEIT ELECTRONIC PARTS TO PREVENT SUCH PARTS FROM ENTERING THE USAF/DOD SUPPLY CHAIN. THESE POLICIES AND PROCEDURES SHALL BE DOCUMENTED IN A CPP FOR SUBMISSION AND APPROVAL IN ACCORDANCE WITH DATA ITEM DESCRIPTION (DID) DI-MISC-81832 AND ACCOMPLISHED FOR ALL SPECIFIED CONTRACT ITEMS. DI-MISC-81832 IS APPLICABLE TO PARTS, MATERIAL AND PROCESSES SELECTION (PMPS) ASSOCIATED WITH DELIVERY OF SYSTEMS AND ASSEMBLIES TO THE USAF AND DOD. THE REQUIREMENTS ESTABLISHED BY DI-MISC-81832 ALSO APPLY TO ELECTRONICS COMPONENTS PROCURED IN SUSTAINMENT OF SUCH SYSTEMS AND ASSEMBLIES. THE REQUIREMENTS OF THE RECENTLY DOD-ADOPTED SAE 5553, AEROSPACE STANDARD, COUNTERFEIT ELECTRONICS
PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SHALL ALSO APPLY.
File details come from the government source that posted it. Updated .