CDRL_Portfolio.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: A002 title: Technical Report - Study/Services sub: Fault Isolation auth: DI-MISC-80508B ref: Block 16 req_ofc: A-10 SPO dd250: NO appcode: A dist: D freq: As Req asof: Block 16 firstsub: Block 16 subsub: Block 16 addressee1: AFLCMC/WWAPB draft1:

reg1:

repro1:

addressee2: 6067 Box Elder Lane draft2:

reg2:

repro2:

addressee3: Bldg 1284 draft3:

reg3:

repro3:

addressee4: Hill AFB Utah draft4:

reg4:

repro4:

addressee5: 84056-5811 draft5:

reg5:

repro5:

addressee6: Attn: Travis Kester draft6: 1 reg6:

repro6: 1 addressee7:

draft7:

reg7:

repro7:

addressee8: AFLCMC/WWAK draft8:

reg8:

repro8:

addressee9: 6036 Cedar Lane draft9:

reg9:

repro9:

addressee10: Bldg 1277 draft10:

reg10:

repro10:

addressee11: Hill AFB, Utah draft11:

reg11:

repro11:

addressee12: 84056-5812 draft12:

reg12:

repro12:

addressee13: Attn: Janae Bahner draft13:

reg13: 1 repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15: AFLCMC/WWAK draft15:

reg15:

repro15:

addressee16: 6072 Fir Avenue draft16:

reg16:

repro16:

addressee17: Bldg 1233 draft17:

reg17:

repro17:

addressee18: Hill AFB, Utah draft18:

reg18:

repro18:

addressee19: 84056-5820 draft19:

reg19:

repro19:

addressee20: Attn: Nathan Lee draft20:

reg20: 1 repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 2 total_repro: 1 remarks: Block 5: PWS paragraphs: 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.23.1.1.2.2, 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, 3.1.7, 3.1.8, 4.2.1

Block 9: Distribution Statement D: Distribution authorized to Department of Defense and US DoD contractors only; administrative/Operational Use; 17 January 2014. Other requests for this document shall be referred to the A-10 System Program Office Engineering Authority, Hill Air Force Base UT, 84056.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq.

Violation of these export laws are subject to severe criminal penalties.

Dissemination of this document is controlled under DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blocks 11 & 12: Initial submission shall be 20 business days after A-10 SPO request, with A-10 SPO approval. Contractor format is acceptable.

Block 13: Subsequent submission shall be within 7 business days after A-10 SPO request, with A-10 SPO approval. Contractor format is acceptable.

Block 14 continued: Electronic submissions are acceptable. E-mail addresses for distribution will be provided upon contract award.

group:

total_price:

prep_name: Marlene Dayton line_item: N/A exhibit: A xtdp: Off xtm: Off othercat: X (MGMT) system: A-10 ctr_no: FD2020-15-50354 contr:

remarksb:

Page2: 2

Reset:

2014-10-08T10:30:36-0600

DAYTON.MARLENE.1231478694

prep_date: 08 Oct 2014 app_by: Travis Kester

2014-02-03T10:22:53-0700

KESTER.TRAVIS.L.1268825793

app_date: 08 Oct 2014

Page: 1 of_pages: 3 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: A003 title: Test Plan sub: Fault Isolation auth: DI-NDTI-80566A ref: Block 16 req_ofc: A-10 SPO dd250: NO appcode: A dist: D freq: AS REQ asof: Block 16 firstsub: Block 16 subsub: Block 16 addressee1: AFLCMC/WWAPB draft1:

reg1:

repro1:

addressee2: 6067 Box Elder Lane draft2:

reg2:

repro2:

addressee3: Bldg 1284 draft3:

reg3:

repro3:

addressee4: Hill AFB Utah draft4:

reg4:

repro4:

addressee5: 84056-5811 draft5:

reg5:

repro5:

addressee6: Attn: Travis Kester draft6: 1 reg6:

repro6: 1 addressee7:

draft7:

reg7:

repro7:

addressee8: AFLCMC/WWAEA draft8:

reg8:

repro8:

addressee9: 6036 Cedar Lane draft9:

reg9:

repro9:

addressee10: Bldg 1277 draft10:

reg10:

repro10:

addressee11: Hill AFB, Utah draft11:

reg11:

repro11:

addressee12: 84056-5812 draft12:

reg12:

repro12:

addressee13: Attn: Janae Bahner draft13:

reg13: 1 repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15: AFLCMC/WWAK draft15:

reg15:

repro15:

addressee16: 6072 Fir Avenue draft16:

reg16:

repro16:

addressee17: Bldg 1233 draft17:

reg17:

repro17:

addressee18: Hill AFB, Utah draft18:

reg18:

repro18:

addressee19: 84056-5820 draft19:

reg19:

repro19:

addressee20: Attn: Nathan Lee draft20:

reg20: 1 repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 2 total_repro: 1 remarks: Block 5: PWS paragraphs: 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.2, 3.1.2, 3.1.5, 3.1.6, 3.1.7

Block 9: Distribution Statement D: Distribution authorized to Department of Defense and US DoD contractors only; administrative/Operational Use; 17 January 2014. Other requests for this document shall be referred to the A-10 System Program Office Engineering Authority, Hill Air Force Base UT, 84056.

Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq.

Violation of these export laws are subject to severe criminal penalties.

Dissemination of this document is controlled under DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blocks 11 & 12: First submission is due within 10 business days after A-10 SPO request, with A-10 SPO approval.

Block 13: Subsequent submission is due within 5 business days after A-10 SPO request, with A-10 SPO approval.

Block 14 continued: Electronic submissions are acceptable in PDF format. E-mail addresses for distribution will be provided upon contract award. If mailed, please provide submission on CD.

group:

total_price:

prep_name: Marlene Dayton line_item: N/A exhibit: A xtdp: Off xtm: Off othercat: X (NDTI) system: A-10 ctr_no: FD2020-15-50354 contr:

remarksb:

Page2: 2

Reset:

2014-10-08T10:31:10-0600

DAYTON.MARLENE.1231478694

prep_date: 08 Oct 2014 app_by: Travis Kester

2014-02-03T10:19:33-0700

KESTER.TRAVIS.L.1268825793

app_date: 08 Oct 2014

Page: 1 of_pages: 2 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: A004 title: Temporary Non-Standard Modification Documentation and Marking Requiremetns sub: Fault Isolation auth: DI-MISC-81562 ref: Block 5 req_ofc: A-10 SPO dd250: NO appcode: A dist: D freq: As Req asof: Block 16 firstsub: Block 16 subsub: Block 16 addressee1: AFLCMC/WWAPB draft1:

reg1:

repro1:

addressee2: 6067 Box Elder Lane draft2:

reg2:

repro2:

addressee3: Bldg 1284 draft3:

reg3:

repro3:

addressee4: Hill AFB Utah draft4:

reg4:

repro4:

addressee5: 84056-5811 draft5:

reg5:

repro5:

addressee6: Attn: Travis Kester draft6: 1 reg6:

repro6: 1 addressee7:

draft7:

reg7:

repro7:

addressee8: AFLCMC/WWAEA draft8:

reg8:

repro8:

addressee9: 6036 Cedar Lane draft9:

reg9:

repro9:

addressee10: Bldg 1277 draft10:

reg10:

repro10:

addressee11: Hill AFB, Utah draft11:

reg11:

repro11:

addressee12: 84056-5812 draft12:

reg12:

repro12:

addressee13: Attn: Janae Bahner draft13:

reg13: 1 repro13:

addressee14: Rodney Hammond draft14:

reg14: 1 repro14:

addressee15: AFLCMC/WWAK draft15:

reg15:

repro15:

addressee16: 6072 Fir Avenue draft16:

reg16:

repro16:

addressee17: Bldg 1233 draft17:

reg17:

repro17:

addressee18: Hill AFB, Utah draft18:

reg18:

repro18:

addressee19: 84056-5820 draft19:

reg19:

repro19:

addressee20: Attn: Nathan Lee draft20:

reg20: 1 repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 3 total_repro: 1 remarks: Block 5: PWS paragraphs: 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.2, 3.1.2, 3.1.3, 3.1.4, 3.1.5, 3.1.6, Block 9: Distribution Statement D: Distribution authorized to Department of Defense and US DoD contractors only; administrative/Operational Use; 17 January 2014. Other requests for this document shall be referred to the A-10 System Program Office Engineering Authority, Hill Air Force Base UT, 84056.

Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq.

Violation of these export laws are subject to severe criminal penalties.

Dissemination of this document is controlled under DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Block 12: The First Submission is Due within 3 business days after A-10 SPO request, as required, and requires A-10 SPO approval.

Blocks 11,13: Subsequent Submission is due within 5 business days, as required, and requires A-10 SPO approval.

Block 14 continued: Electronic submissions are acceptable in PDF format. E-mail addresses for distribution will be provided upon contract award. If mailed, please provide submission on CD.

group:

total_price:

prep_name: Marlene Dayton line_item: N/A exhibit: A xtdp: Off xtm: Off othercat: X (MISC) system: A-10 ctr_no: FD2020-15-50354 contr:

remarksb:

Page2: 2

Reset:

2014-10-08T10:32:30-0600

DAYTON.MARLENE.1231478694

prep_date: 08 Oct 2014 app_by: Travis Kester

2014-02-03T10:19:33-0700

KESTER.TRAVIS.L.1268825793

app_date: 08 Oct 2014

Page: 1 of_pages: 2 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

MIL-STD-31000

TDP OPTION SELECTION WORKSHEET

SYSTEM: DATE PREPARED:

A. CONTRACT NO.

B. EXHIBIT/ATTACHMENT NO. C. CLIN D. CDRL DATA

ITEM NO(s).

1. TDP Level (X and complete as applicable .)

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCTION LEVEL

B. REMARKS:

2. TYPE AND FORMAT (X all that apply and complete as applicable .)

A.

TYPE 2D: 2D DRAWINGS

TYPE 3D: 3D MODELS ONLY

TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

B.

NATIVE CAD (SPECIFY TYPE) ____________________________________

ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

ISO 32000 PORTABLE DOCUMENT FORMAT ________________________

OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

HARDCOPY ___________________________________________________

REMARKS : ______________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. CONTRACTOR CAGE AND DOCUMENT NUMBERS

GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By:

B. USE CAGE CODE:

C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

CONTRACTOR FORMAT.

GOVERNMENT FORMAT.

REMARKS: ______________________________________________________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply )

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR - OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS

QUALITY ASSURANCE PROVISIONS

SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIAL TOOLING (ST) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LISTS

6. ASSOCIATED LIST (X and complete as applicable)

A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE

B. DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

C. INDEX LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) D. WIRING LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) E. INDENTURED DATA LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100

ENGINEERING DRAWING

PRACTICES

WITH APPENDICES:

B C D E

ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS

ASME Y14.34 ASSOCIATED LIST

ASME Y14.35M REVISION OF ENGINEERING

DRAWINGS AND ASSOCIATED LIST

ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA

PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

OTHER STANDARDS

APPLY AS

DESCRIBED:

COMPANY STANDARDS

PERMITTED YES NO

8. OTHER TAILORING (Attach additional sheets as necessary)

FIGURE 1: TDP Option Selection Worksheet

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT:

xTDP: Off xTM: Off

OTHER:

DSYSTEMITEM:

E_CONTRACTPR_NO:

FCONTRACTOR:

16_REMARKS_Continued: s. Original drawings are not required. If applicable, reproducible stable base copies of unidimensional drawings and master pattern drawings are required. See Block 14.

Page2: 2 of_pages:

Reset:

xtm: Off

1_DATA_ITEM_NO: A005

2_TITLE_OF_DATA_ITEM: Product Drawings and Associated Lists

3_SUBTITLE: Fault Isolation Follow-On

4_AUTHORITY_Data_Acquisit: DI-SESS-81000E

5_CONTRACT_REFERENCE: Block 5

6_REQUIRING_OFFICE: OO-ALC/WWAE

7_DID_250_REQ: WAWF

8_APP_CODE: A

DIST_STATEMENT: D

10_FREQUENCY: AS REQ

11_AS_OF_DATE: Block 11

12_DATE_OF_FIRST_SUBMISSI: Block 12

13_DATE_OF_SUBSEQUENT_SUB: Block 13 addressee1: WAWF draft1:

reg1:

repro1:

addressee2: DoDAACFA8202 draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4: AFLCMC/WWAPB draft4:

reg4:

repro4:

addressee5: 6067 Box Elder Lane draft5:

reg5:

repro5:

addressee6: Bldg 1284 draft6:

reg6:

repro6:

addressee7: Hill AFB, Utah draft7:

reg7:

repro7:

addressee8: 84056-5811 draft8:

reg8:

repro8:

addressee9: Attn: Travis Kester draft9: 1 reg9:

repro9: 1 addressee10:

draft10:

reg10:

repro10:

addressee11: AFLCMC/WWAEA draft11:

reg11:

repro11:

addressee12: 6036 Cedar Lane draft12:

reg12:

repro12:

addressee13: Bldg 1277 draft13:

reg13:

repro13:

addressee14: Hill AFB, Utah draft14:

reg14:

repro14:

addressee15: 84056-5812 draft15:

reg15:

repro15:

addressee16: Attn: Janae Bahner draft16:

reg16: 1 repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18: AFLCMC/WWAK draft18:

reg18:

repro18:

addressee19: 6072 Fir Avene draft19:

reg19:

repro19:

addressee20: Bldg 1233 draft20:

reg20:

repro20:

addressee21: Hill AFB, Utah draft21:

reg21:

repro21:

addressee22: 84056-5820 draft22:

reg22:

repro22:

addressee23: Attn: Nathan Lee draft23:

reg23: 1 repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25: OO-ALC/LZPEM draft25:

reg25:

repro25:

addressee26: 6020 Gum Lane draft26:

reg26:

repro26:

addressee27: Bldg 1218 draft27:

reg27:

repro27:

addressee28: Hill AFB, Utah draft28:

reg28:

repro28:

addressee29: 84056-5825 draft29:

reg29:

repro29:

addressee30: Attn: Wendy Heugly draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_repro: 1

16_REMARKS: Drawings shall be IAW ASME Y14.100-2013 (including Appendices B,C,D,E) ASME Y14.5, ASME Y14.3M, ASME Y 14.24, ASME Y14.34, ASME Y14.35 and A-10 Systems Program Office A-10 Drawing Practices Document (08-A10DOC-001). Tailoring to these documents as indicated on this DD1423.

Block 4: Tailoring of DI-SESS-81000E per information in this document and attached MIL-STD-31000 Technical data package option Selection Worksheet forms a part of this contract data requirements list.

Contractor may select the type of drawings, however the contractor shall prepare Source Control Drawings for existing Commercial-off-the -shelf (COTS) items. Two or more sources shall be identified.

Block 5: PWS Para 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.2, 3.1.2, 3.1.3, 3.1.5, 3.1.6, 3.1.7

Block 7: Electronic receiving report required via Internet Wide Area Work-flow (WAWF) (WAWF at: HTTPS://WAWF.EB.MIL). DoDAAC FA8202. The electronic receiving report shall be used only for this data item: Do not combine other data item submittal with this requirement.

Block 9: Distribution Statement D: Distribution authorized to Department of Defense and US DoD contractors only; administrative/Operational Use; 24 January 2014. Other requests for this document shall be referred to the A-10 System Program Office Engineering Authority, Hill Air Force Base UT, 84056.

Blocks 11, 12, 13: The First Submission is Due within 10 business days after A-10 SPO request as required in PWS Para 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.2, 3.1.2, 3.1.3, 3.1.5, 3.1.6, 3.1.7, and requires A-10 SPO approval.

Subsequent Submission is due within 5 business days after A-10 SPO request as required in PWS Para 3.1, 3.1.1, 3.1.1.1, 3.1.1.1.2, 3.1.1.2.1, 3.1.1.2.2, 3.1.2, 3.1.3, 3.1.5, 3.1.6, 3.1.7 as required, and requires A-10 SPO approval.

Warning - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq. Violation of these export laws are subject to severe criminal penalties. Dissemination of this document is controlled under DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Distribution Statement, Export Control and Destruction Notice shall be on the first sheet of each drawing and associated lists.

17_PRICE_GROUP:

ESTIMATED_TOTAL_PRICE:

G_PREPARED_BY: Wendy Heugly

H_DATE:

1_APPROVED_BY: Travis Kester

J_DATE:

Page: 1 reg38t: 2

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT:

xTDP: Yes

OTHER:

DSYSTEMITEM: A-10

E_CONTRACTPR_NO:

FCONTRACTOR:

of_pages: 3

Reset:

xTM: Off

16_REMARKS_Continued: 9. Tailoring to ASME’s as follows:

ASME Y14.100-2013

(1) (Application Data) para 4.6 - Application Data is required on firsts sheet of each Drawing and Associated List. General use or multi-use notations is allowed.

(2) (Drawing Notes) para 4.26 - Drawing Notes shall be on first sheet of each drawing.

(3) (Language) para 4.26.1 - Drawings and Associated Lists shall be in the English language.

(4) (Drawing Notes-Contents) para 4.26.6 (f) - Flag note symbol used shall be consistent throughout the entire TDP.

(5) (Drawing Verification and Approval) para 4.27 - For newly created Drawings and Associated Lists contractor signature block format is acceptable provided it meets the requirements of ASME Y14.1. In addition the following blocks shall be added to signature block: AF Authentication and Approval Date, AF Release and Approval Date. Contractor names shall be used for Checker, Engineer, Engineering Approval, and Drafter. AF names shall be used for AF Authentication and AF Release.

ASME Y 14.34M Associated Lists

ASME Y 14.35 M

(1) Redrawn Drawings shall be IAW para. 4.3, sub-para 4.3.2

(2) Revision column shall be IAW para 6.1, sub-para 6.1.2 & 6.1.3 Contractor shall maintain revision history in its entirety.

(3) Revision Letters shall be IAW para 7.1, sub-paras 7.1.1 (a), (b), (d), & (e), and para 7.2, sub-para 7.2.1 (a), (b), & (c).

(4) Revision History Block shall be IAW para 7.1, sub-para 7.1.2 (a) & (b).

(5) Revision status of sheets block shall be IAW para 7.4, sub-para 7.4.2 (a), (b), & (c).

(6) Adding sheets shall be IAW para 7.5, sub-para 7.5.1(a)

(7) Deleting sheets shall be IAW para 7.5, sub-para 7.5.2 (a)

ASME Y14.5M

Dimensioning and Tolerancing shall be IAW para 1.6 and shall be decimal inch.

ASME Y14.3-2003

Angle of projection shall be IAW para1.6.1 third angle projection.

ASME Y14.100-2013 INVOKED APPENDICES:

Appendix B- Non Commercial Drawing Practices Appendix C- Drawing Titles Appendix D- Numbering, Coding, and Identification Appendix E- Markings on Engineering Drawings Appendix E- for para E7 see DD1423 Block 9

JEDMICS REQUIREMENTS (Instructions ) for All documents (Drawings and Associated Lists) submitted in PDF Format.

Final Delivery

(b) Contractor shall submit Drawings and Associated Lists to BLK 14 addressees. All updated/ revised Drawings and Associated Lists shall be delivered with all outstanding Engineering Change Orders (ECOs) incorporated. Government requires forty five (45) working days for final inspection and acceptance of delivery. CD-ROM label(s) shall be marked with Date, Contract Number, Company Name, Data Item Number and System.

Page2: 2

Page4: 3

Block16_Cont:

2:

A CONTRACT NO:

B EXHIBITATTACHMENT NO:

C CLIN:

D CDRL DATA ITEM NOs:

1 TDP Level X and complete as applicable:

CONCEPTUAL LEVEL: Off

DEVELOPMENTAL LEVEL: Off

PRODUCTION LEVEL: On

B REMARKS:

2 TYPE AND FORMAT X all that apply and complete as applicable:

TYPE 2D 2D DRAWINGS: On

TYPE 3D 3D MODELS ONLY: Off

TYPE 3D 3D MODELS WITH: Off undefined:

NATIVE CAD SPECIFY TYPE: Off

ISO 10303 STEP FORMAT Specify STEP PROTOCOL AP203 AP 214 etc: Off

ISO 32000 PORTABLE DOCUMENT FORMAT: On

OTHER ELECTRONIC FORMAT SPECIFY TYPE: Off

HARDCOPY: Off undefined_2:

undefined_3:

undefined_4:

undefined_5:

REMARKS:

CONTRACTOR CAGE AND DOCUMENT NUMBERS: On

GOVERNMENT CAGE COMPLETE 3B 3C OR 3D: Off

B USE CAGE CODE:

C USE DOCUMENT NUMBERS:

D To Be Assigned By:

4 DRAWING FORMATS X one and complete as applicable:

CONTRACTOR FORMAT: On

GOVERNMENT FORMAT: Off

REMARKS_2:

5 TDP ELEMENTS REQUIRED X all that apply:

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR OR THE FOLLOWING ARE REQUIRED: Off

CONCEPTUAL DRAWINGSMODELS AND ASSOCIATED LISTS: Off

DEVELOPMENTAL DESIGN DRAWINGSMODELS AND ASSOCIATED LISTS: Off

PRODUCT DRAWINGSMODELS AND ASSOCIATED LISTS: On

COMMERCIAL DRAWINGSMODELS AND ASSOCIATED LISTS: Off

QUALITY ASSURANCE PROVISIONS: Off

SPECIAL INSPECTION EQUIPMENT SIE DRAWINGSMODELS AND ASSOCIATED LISTS: Off

SPECIAL TOOLING ST DRAWINGSMODELS AND ASSOCIATED LISTS: Off

SPECIFICATIONS: Off

SOFTWARE DOCUMENTATION: Off

SPECIAL PACKAGING INSTRUCTIONS SPI DRAWINGSMODELS AND ASSOCIATED LISTS: Off

6 ASSOCIATED LIST X and complete as applicable:

A PARTS LIST X ONE:

undefined_6: On

1 INTEGRAL: On

2 SEPARATE:

undefined_7: Off

B DATA LISTS X ONE:

undefined_8: Off

1 NOT REQUIRED: Off

2 REQUIRED SPECIFY LEVELS OF ASSEMBLY: Off

C INDEX LISTS X ONE:

undefined_9: Off

1 NOT REQUIRED_2: Off

2 REQUIRED SPECIFY LEVELS OF ASSEMBLY_2: Off

D WIRING LISTS X ONE: Off

1 NOT REQUIRED_3: Off

2 REQUIRED SPECIFY LEVELS OF ASSEMBLY_3: Off

E INDENTURED DATA LISTS X ONE: Off

1 NOT REQUIRED_4: Off

2 REQUIRED SPECIFY LEVELS OF ASSEMBLY_4: Off

F APPLICATION LISTS X ONE: Off

1 NOT REQUIRED_5: Off

2 REQUIRED SPECIFY LEVELS OF ASSEMBLY_5: Off

F APPLICATION LISTS X ONERow1:

1 NOT REQUIREDRow1:

2 REQUIRED SPECIFY LEVELS OF ASSEMBLYRow1:

ASME Y14100 ENGINEERING DRAWING PRACTICES WITH APPENDICES B C D E:

ASME Y14100: On

ASME Y1424 TYPES AND APPLICATIONS OF: On

OTHER STANDARDS: Off

ASME Y1434 ASSOCIATED LIST: On

ASME Y1435M REVISION OF ENGINEERING: On

B: On

C: On

D: On

E: On

ASME Y1441 DIGITAL PRODUCT DEFINITION DATA: On

COMPANY STANDARDS: NO

ASME Y145 DIMENSIONING AND TOLERANCING: On

8 OTHER TAILORING Attach additional sheets as necessary:

2014-01-24T15:12:21-0700

HEUGLY.WENDY.T.1231478198

2014-02-03T10:24:37-0700

KESTER.TRAVIS.L.1268825793

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: A001 title: Contractor Progress, Monthly Status Report sub: Fault Isolation auth: DI-MGMT-80227 ref: Block 16 req_ofc: A-10 SPO dd250: NO appcode: A dist: D freq: MONTHLY asof: Block 16 firstsub: Block 16 subsub: Block 16 addressee1: AFLCMC/WWAPB draft1:

reg1:

repro1:

addressee2: 6067 Box Elder Lane draft2:

reg2:

repro2:

addressee3: Bldg 1284 draft3:

reg3:

repro3:

addressee4: Hill AFB Utah draft4:

reg4:

repro4:

addressee5: 84056-5811 draft5:

reg5:

repro5:

addressee6: Attn: Travis Kester draft6: 1 reg6:

repro6: 1 addressee7:

draft7:

reg7:

repro7:

addressee8: AFLCMC/WWAK draft8:

reg8:

repro8:

addressee9: 6036 Cedar Lane draft9:

reg9:

repro9:

addressee10: Bldg 1277 draft10:

reg10:

repro10:

addressee11: Hill AFB, Utah draft11:

reg11:

repro11:

addressee12: 84056-5812 draft12:

reg12:

repro12:

addressee13: Attn: Janae Bahner draft13:

reg13: 1 repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15: AFLCMC/WWAK draft15:

reg15:

repro15:

addressee16: 6072 Fir Avenue draft16:

reg16:

repro16:

addressee17: Bldg 1233 draft17:

reg17:

repro17:

addressee18: Hill AFB, Utah draft18:

reg18:

repro18:

addressee19: 84056-5820 draft19:

reg19:

repro19:

addressee20: Attn: Nathan Lee draft20:

reg20: 1 repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 2 total_repro: 1 remarks: Block 5. PWS Paragraphs 4.2.1, 4.2.2, 4.2.3, 7.0

Block 9. Distribution Statement D: Distribution authorized to Department of Defense and US DoD contractors only; administrative/Operational Use; 17 January 2014. Other requests for this document shall be referred to the A-10 System Program Office Engineering Authority, Hill Air Force Base UT, 84056.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., APP. 2401, et seq.

Violation of these export laws are subject to severe criminal penalties.

Dissemination of this document is controlled under DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blocks 10, 11, 12, & 13: Submission frequency shall be 30 calender days ARO and monthly on the tenth working day thereafter. Contractor format is acceptable.

Block 14 continued: Electronic submissions are acceptable. E-mail addresses for distribution will be provided upon contract award.

group:

total_price:

prep_name: Marlene Dayton line_item: N/A exhibit: A xtdp: Off xtm: Off othercat: X (MGMT) system: A-10 ctr_no: FD2020-15-50354 contr:

remarksb:

Page2: 2

Reset:

2014-10-08T10:29:13-0600

DAYTON.MARLENE.1231478694

prep_date: 08 Oct 2014 app_by: Travis Kester

2014-02-03T10:22:53-0700

KESTER.TRAVIS.L.1268825793

app_date: 08 Oct 2014

Page: 1 of_pages: 3 app: Adobe Professional 8.0