Combined_Synopsis_Solicitation_Small_Wire_EDM.pdf

Combined Synopsis/Solicitation Small Wire Electrical Discharge Machining Machine

Tinker AFB, OK

General Information Document Type: Combined Synopsis/Solicitation Solicitation Number: FA8132-19-Q-1936 Posted Date: 11 April 2019 Response Date: 30 April 2019, 3:00 PM Central Standard Time Classification Code: 3541 Set Aside: Yes NAICS Code: 333517

Contracting Office POC Information:

Kristina Keenan Contracting Specialist Kristina.Keenan@us.af.mil

(405) 734-9592

Alternate Point of Contact:

Linda Murphy Contracting Officer Linda.murphy.2@us.af.mil

(405) 739-3147

Description

This is a Combined Synopsis/Solicitation (CSS) for commercial items prepared IAW the format in FAR Subpart 12.603, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued aside from the one posted here.

This solicitation is being issued as a request for quote (RFQ) IAW FAR Part 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-97, Defense Federal Acquisition Regulation Supplement Change Notice (DPN) 20171228, and Air Force Acquisition Circular

(AFAC) 2017-1003.

The associated North American Industrial Classification System (NAICS) code for this procurement is 333517, with a small business size standard of 500.

This acquisition is a 100% Small Business Set-aside.

Any quote from a large businesses is ineligible for award.

The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMC) at Tinker Air Force Base, Oklahoma, intends to award a Firm Fixed Price (FFP) contract for the acquisition of a quantity of one (1 EA) Fanuc

Robocut Small Wire Electrical Discharge Machining (EDM) machine and related items, or equivalent, with Hirschmann tooling or equivalent, training, and installation to be located within the Oklahoma City Air Logistic Complex (OC-ALC) in accordance with the attached Statement of Work (SOW). For a description of the items, see Section 2 – Supplies/Services and Price below. Award of the contract will be subject to the availability of funding.

The government will not provide government furnished property, labor, equipment tools, or material needed for delivery or installation of the items purchased.

This is a Brand Name (Fanuc and Hirschmann) or Equal acquisition. In accordance with clause 52.211-6, offerors proposing “equal” items to the required items must submit, along with the completed CSS, information on the equivalent items proposed, as required by 52.211-6. Such Information should include manufacturer name, part numbers, part description, and the parts’ capability to meet salient outlined characteristics.

NOTE: EDM MACHINES AND RELATED ITEMS OFFERED IN QUOTES AS EQUIVALENTS TO

FANUC ROBOCUT WIRE EDM C600iB -16” EDM MACHINE MUST USE A FANUC CONTROLLER.

QUOTE SUBMISSION INFORMATION

Quotes are due to the point of contact (POC) below by 30 April 2019/3:00 PM (Central Standard Time)

Primary POC Alt POC Kristina Keenan Linda W. Murphy Contracting Specialist Contract Officer kristina.keenan@us.af.mil linda.murphy.2@us.af.mil 405-734-9592 405-739-3147

TERMS, CONDITIONS, PROVISIONS, & CLAUSES

Payment terms will be Net 30. You may offer payment discounts for early payment, but this will not be considered in quote evaluation.

Offerors must be registered in the System for Award Management (SAM) database (available at:

https://www.sam.gov/portal/SAM/#1)

Please work the cost of shipping into your unit price on Contract Line Item Numbers described in Section 2 below (Products/Services). A separate charge for shipping is not allowed.

Invoices must be submitted in the Government’s invoicing, receipt, and acceptance online application, Wide Area Workflow, which can be found in the Wide Area Workflow e-Business Suite (WAWF; https://wawf.eb.mil). Payment will be made after the invoice is signed in WAWF and after the item is received and accepted by the Government; do not submit invoices until the items have been delivered.

Standard commercial warranties apply.

mailto:kristina.keenan@us.af.mil mailto:matthew.mcknight.1@us.af.mil https://wawf.eb.mil/

All items are FOB Destination at Tinker Air Force Base, Oklahoma 73145. Inspection and Acceptance are at Tinker

AFB.

Government location’s utilities: Government will furnish utilities within 25 feet of machine installation location.

52.212-1 -- Instructions to Offerors – Commercial Items (Oct 2018)

52.212-2 -- Evaluation -- Commercial Items

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation. The following two factors shall be used to evaluate offers:

Factor 1 – Technical

Technical Capability – the Government will evaluate the Contractor’s response on its ability to provide the following Brand Name (Fanuc and Hirschmann), or Equal, item listed below in Section 2 under CLINs 0001 through 0012, of this CSS, as set forth below and in accordance with the attached Statement of Work. The government’s evaluation shall include Contractor’s proposal on:

1. Small Wire EDM quoted must have the following salient characteristics:

X Axis Travel 23” minimum

Y Axis Travel 15” minimum

Z Axis Travel 16” minimum

UV Axes Travel +/- 3.5” minimum

Work piece thickness at taper angle +/- 45 degrees at 2.75”

Positional Accuracy (X,Y) +/- 0.0001” or better

Repeatability (X,Y) +/- 0.000050” or better

a. Machine must include a CORE-STITCH Slug Retention feature that holds the work piece in place when cutting stock.

b. Must include CADCAM software capable of posting to the machine:

FANUC ROBOCUT – CAMi software, or equivalent, to include:

i. Two (2) Axis XY single plane geometry with complete “T” code taper ability that includes G60-

G63 type corner modifications, four (4) Axes X, Y, Z, UV programming defined from two planes in any orientation in three dimensional space, involute gear generator, fitted “spline” curve generator

ii. CAD data input/output via DXF, IGES, and STEP files, communication software to send/receive G code programs to/from FANUC machine, and post processed data to run on FANUC Wire EDM machine.

ROBOCUT-CAMi specifications:

i. Operating Systems: Windows® 10

ii. CPU 32 Bit (x86) or 64 Bit (x64) at 1 GHz or higher

iii. RAM memory

iv. 1 GB (32 Bit)

v. 2 GB (64 Bit)

vi. Hard Drive: 16 GB minimum

vii. CD-ROM drive

viii. 2 button Mouse and keyboard

ix. Network Card with Ethernet Port

x. USB Port

xi. Display 1024 x 768 or higher resolution with 16 colors or more.

xii. (SVGA or XGA) (14” or larger)

xiii. 3D Video Accelerator Card – for rendering function

c. Minimum of three (3) months’ worth of consumables must come with the machine.

d. Machine also needs to include EDM tooling necessary for clamping across the entire work envelope.

e. NOTE: EDM MACHINES ITEMS OFFERED IN QUOTES AS EQUIVALENTS TO FANUC

ROBOCUT WIRE EDM C600iB -16” EDM MACHINE MUST USE A FANUC CONTROLLER.

2. Quotation shall describe the list of consumables that come with the EDM machine in offeror’s proposal, will include the Brand Name or Equivalent, which list shall provide the manufacturer, part description, and the spare part number.

3. In quotation of offerors proposing an equivalent to the Brand Name items specified by part number or model number, contractor shall identify by each CLIN, the manufacturer, description, the part number and CLIN unit price of the equivalent proposed. The description of the quoted EDM machine’s power regulation (Power transformer), shall be described in the quote.

4. Quotation shall state the EDM machine’s electric supply and utilities’ requirements. The government shall supply utilities within 25 feet of the machine install location.

5. Quotation shall include, for each Brand Name or Equal EDM machine, the machine’s footprint dimensions (length, width, and height in feet).

6. Offerors proposal shall reflect offeror’s understanding that products in CLINs 0001 through 0012 are for a turnkey installation of products provided, in accordance with the SOW, with offeror’s quotation representing the proposed price for fully operational capability of the machines and components supplied, delivered and installed at Tinker AFB, Oklahoma. The government will provide all required utility connections to within 25 feet of the machine installation location. The government will not be providing contractor any labor, parts, materials, tools, equipment, rigging, testing or training on the contract.

7. Offeror’s proposal shall include a description of the contractor’s ability to provide the following types of on-site training to five (5) government employees after delivery/installation/start-up of the equipment: Operational training, Software training, and System Maintenance training. All training is to be conducted by contractor at Tinker AFB, Oklahoma. Offeror’s proposal shall include a description of what training with be conducted in a classroom and what training will be on-the-job at the equipment’s location at Tinker AFB.

Rating Description Acceptable Proposal clearly meets the minimum requirements of the solicitation Unacceptable Proposal does not clearly meet the minimum requirements of the solicitation

Offeror proposal’s response to this portion, on Technical Capability, shall be no longer than 15 pages. This is a pass-or-fail factor.

Factor 2 – Cost/Price

Price – the Government will award this requirement to a technically-capable offeror based on the lowest total evaluated price of contract line items CLINs 0001 through 0012 described in Section 2 below (Products/Services).

The Offeror’s proposal shall provide a firm fixed price on a unit price for the EDM Machine, and associated requirements set forth in CLINs 0001 through 0012.

(c) Evaluation Methodology. The Government will evaluate the three lowest-priced offers for technical capability.

Then, price will be evaluated for the technically-capable offers and they will be listed from lowest to highest price based on the total evaluated price.

If one of the three lowest-priced offers’ technical capability is determined to be unacceptable, it will be rejected, and the next lowest-priced offer will be selected for evaluation.

Award will be made to the offeror with the lowest total evaluated price that met the acceptability standards for technical capability.

(d) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party.

Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 -- Offeror Representations and Certifications -- Commercial Items.

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-4 -- Contract Terms and Conditions -- Commercial Items

a. The following clause is included as addenda to FAR 52.212-4:

FAR 52.252-1, Solicitation Provisions Incorporated by Reference, (February, 1998)

52.212-5 -- Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items The following clauses within 52.212-5 are included but not limited to:

52.203-6, Restrictions on Subcontractor Sales to the Government 52.203-13, Contractor Code of Business Ethics and Conduct 52.204-10, Reporting Executive Compensation and First-Tier Subcontract 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-14, Limitations on Subcontracting 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor

52.222-19, Child Labor—Cooperation with Authorities 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports 52.222-40, Notification of Employee Rights Under the National Labor Relations 52.222-50, Combating Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving On Base

Clauses/Provisions IAW FAR 12.30:

52.204-16, Commercial and Government Entity Code Reporting 52.204-18, Commercial and Government Entity Code Maintenance 52.209-5, Certification Regarding Responsibility Matters 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.211-6, Brand Name or Equal 52.225-18, Place of Manufacture 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran— Representation and Certificates 52.232-1, Payments 52.232-18, Availability of Funds 52.232-39, Unenforceability of Unauthorized Obligations 52.247-34, FOB Destination 52.252-1, Solicitation Provisions Incorporated by Reference 52.232-40, Providing Accelerated Payments to Small Business subcontractors

The following DFARS clauses are included but not limited to:

252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7003, Agency Office of the Inspector General 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7000, Buy American—Balance of Payments Program Certificate 252.225-7001, Buy American and Balance of Payments Program 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payments 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7022, Representation of Extent of Transportation by Sea

5352.201-9101 Ombudsman 5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS)

5352.223-9001 Health and Safety on Government Installations (NOV 2012)

All clauses and provisions can be found on the following websites:

Federal Acquisition Regulation (FAR) – http://farsite.hill.af.mil/vffara.htm Defense Federal Acquisition Regulation Supplement (DFARS) – http://farsite.hill.af.mil/vfdfara.htm

Air Force Federal Acquisition Regulation Supplement (AFFARS) – http://farsite.hill.af.mil/vfaffara.htm

------------------------------------------------------- CONTRACTOR NOTES -------------------------------------------------------

PACKAGING

Items shall be packaged in accordance with the Contractor’s commercial best practice to ensure undamaged arrival at destination. Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length shall be packaged on skidded crates or palletized to allow handling by forklift.

The exterior container shall be marked (readable from 24 inches), “NOT FOR OUTSIDE STORAGE.”

TRUCK GATE INFORMATION

IMPORTANT DELIVERY INFORMATION

Tinker Air Force Base has a Truck Entry Gate (Gate 33), which is located at the corner of 59th Street and Air Depot Blvd (southwest corner of the base). Gate 33 shall be used for all deliveries by truck to this base. Trucks will not be allowed to gain access through any other gate. Since your firm’s delivery on this order is affected, please advise your delivery carrier to use the new gate. This should minimize the impact of your delivery.

DELIVERIES TO BUILDING 3001 (B / 3001)

Be advised that delivery vehicles destined for B / 3001 are prohibited from using Staff Drive.

Delivery vehicles may make deliveries only in designated unloading areas.

Since your firm’s delivery may be affected, ensure that your delivery carrier receives proper instructions on delivery / unloading requirements for B / 3001. Unloading in designated unloading areas will minimize any inconvenience, and, attendant ramifications, which may accrue, to your delivery / delivery carrier for failure to adhere to this requirement.

CONTRACT HOLIDAYS

(a) The Government will not be billed for holidays, except when services are required by the Government and are actually performed on a holiday. Holidays in addition to those reflected in this contract, which are designated by the Government, will be billable provided the assigned Contractor employee was available for performance and was precluded from such performance.

(b) The following days are contract holidays: New Year's Day, Martin Luther King, Jr. Day, President's Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and Christmas Day.

LIST OF ATTACHMENTS

# OF

FORM # DESCRIPTION DATE PAGES

Attachment 1 Statement of Work 04 February 2019 7 “Statement of Work for Small Wire Electrical Discharge Machining Machine” http://farsite.hill.af.mil/vffara.htm http://farsite.hill.af.mil/vfdfara.htm http://farsite.hill.af.mil/vfaffara.htm

QUOTE SUBMISSION INFORMATION

Contractor is required to fill in Sections 1, 2 and 3 at the end of this Combined Synopsis/Solicitation (pages 09 to 13), sign this document, and return 1 copy of this Combined Synopsis/Solicitation (without its attachments), with any contractor supporting information to issuing office.

Quotes are due from offerors to the point of contact (POC) below by 30 April 2019, at 3:00 PM Central Standard Time (CST).

Submit proposals to the following individual. Contact the following individuals for information regarding this solicitation: Kristina Keenan kristina.keenan@us.af.mil Linda Murphy linda.murphy.2@us.af.mil

NOTE: Emailed proposals are preferred

This is a combined synopsis/solicitation for Brand Name or Equal products as defined herein. The government intends to award a purchase order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions set forth herein.

Submission shall be received at the Contracting Office listed above not later than 30 April 2019, 3:00 PM Central Standard Time. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f).

E-mailed submissions are accepted and are the preferred form of submission. Receipt will be verified by the date/time stamp on fax or e-mail. Any questions or concerns regarding this solicitation should be submitted in writing via e-mail to: Kristina Keenan kristina.keenan@us.af.mil and Linda Murphy linda.murphy.2@us.af.mil

SECTION 1 – OFFEROR INFORMATION

Company Name Address

CAGE Code and DUNS Number The Government cannot enter into contracts or agreements with contractors not registered in SAM. For registration information, visit the SAM website (https://www.sam.gov/) and follow the instructions in the Quick Start Guide For SAM

Registration, which can be found under the Help Tab and User Guides submenu.

Small Business Size Web Page URL Point of Contact POC Phone # and email address

SECTION 2 –SUPPLIES/SERVICES AND PRICE

All items are FOB Destination at Tinker Air Force Base, Oklahoma 73145

CLIN

Description/Product

Qty

Unit Price

Total Price

FOR ITEMS 0001 through 0012 below, the following is applicable:

Firm Fixed Price Brand Name or Equal FOB Destination only, Tinker AFB, OK New Manufacture Material In accordance with Statement of Work attached Contract award will be subject to funds availability. Quotes shall be valid for no less than 90 days, in US dollars.

Inspection/Acceptance: Government at Destination Standard commercial warranty applies.

0001 FANUC ROBOCUT wire EDM C600iB -16” EDM machine, or equivalent, with the following salient characteristics:

• X Axis: 23” minimum

• Y Axis: 15” minimum

• Z Axis: 16” minimum

• UV Axes travel: +/- 3.5” minimum

• Work Piece Thickness @ Taper Angle: +/- 45 degrees @

2.75”

• Positioning Accuracy (X,Y): +/- 0.0001” or better

• Repeatability (X,Y): +/- 0.000050” or better

1 EA $ $

• Must include a CORE-STITCH Slug Retention feature that holds the work piece in place when cutting stock

• Must include CADCAM software capable of posting to the machine

FANUC ROBOCUT – CAMi software, or equivalent, to include:

• Two (2) Axis XY single plane geometry with complete

“T” code taper ability that includes G60-G63 type corner modifications, four (4) Axes X, Y, Z, UV programming defined from two planes in any orientation in three dimensional space, involute gear generator, fitted “spline” curve generator

• CAD data input/output via DXF, IGES, and STEP files, communication software to send/receive G code programs to/from FANUC machine, and post processed data to run on FANUC Wire EDM machine.

ROBOCUT-CAMi specifications:

• Operating Systems: Windows 10

• CPU 32 Bit (x86) or 64 Bit (x64) at 1 GHz or higher

RAM memory

• 1 GB (32 Bit)

• 2 GB (64 Bit)

• Hard Drive: 16 GB minimum

• CD-ROM drive

• 2 button Mouse and keyboard

• Network Card with Ethernet Port

• USB Port

• Display 1024 x 768 or higher resolution with 16 colors or more (SVGA or XGA; 14” or larger)

• 3D Video Accelerator Card – for rendering function

• Must include minimum of 3 months’ worth of consumables for FANUC ROBOCUT wire EDM C600iB -16” EDM machine, or equivalent, set out in list in quote.

• Must include EDM tooling necessary for clamping across the entire work envelope.

• State machine’s power and utilities’ requirements in quote.

NOTE: EDM MACHINES ITEMS OFFERED IN QUOTES AS

EQUIVALENTS TO FANUC ROBOCUT WIRE EDM C600iB -

16” EDM MACHINE MUST USE A FANUC CONTROLLER

0002 Hirschmann Tooling: HE-4941-24, PRESETTING WORK STATION or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0003 Hirschmann Tooling: BSP.FA13, BASIC-PLUS FRAME / BEAM SYSTEM or Equivalent, compatible with CLIN 0001.

Firm Fixed Price

1 EA

0004 Hirschmann Tooling: H4000, MANUAL CLAMPER or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0005 Hirschmann Tooling: H4110M, 3D ADJUSTING PALLET FOR MANUAL CLAMPERS or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0006 Hirschmann Tooling: H4312/H4312.1, CROSS BEAM VISE KIT -SET or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0007 Hirschmann Tooling: H4538. VERTICAL VISE or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0008 Hirschmann Tooling: H2850, CLAMPING JAW SET or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0009 Hirschmann Tooling: H4631 PRISM VISE or Equivalent, compatible with CLIN 0001

1 EA

0010 Hirschmann Tooling: H4366, SET of 3, SUPPORTING PLATES or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0011 Hirschmann Tooling: A04B-0325-J041#D, WIRE CHOPPER or Equivalent, compatible with CLIN 0001. Firm Fixed Price

1 EA

0012 FANUC ROBOCUT wire EDM C600iB -16” machine TRANSFORMER, or Equivalent, compatible with CLIN 0001.

Firm Fixed Price

1 EA

0013 Turnkey Installation/Start-Up of CLINs 0001 through 0012

Firm Fixed Price The contractor shall provide all labor, tools, parts, equipment, facilities, travel, transportation and incidentals to deliver and install the EDM Machine and associated items in CLINs 0001 through 0012 in accordance with the Statement of Work (SOW) and manufacturer’s specifications, at Tinker AFB, OK. Includes IUID marking. The government will not be providing any transportation, labor, parts, materials, tools, equipment, rigging, testing or training on the contract. The Contractor shall make the all necessary adjustments to the Fanuc Robocut wire EDM C600iB -16” EDM machine, or equivalent, and associated items in CLINs 0001 through 0012, until it is fully operational in accordance with (IAW) the Original Equipment Manufacturer (OEM) specifications and to what is stated in the Statement of Work (SOW). Performance

LOT

Payment Terms / Discount Terms

NET 30 / _______% In _______ Days After Invoice Submission in WAWF

NOTES:

All quotes are valid for no less than 90 days.

Verification and certificate of calibration shall be provided by contractor IAW SOW. The Government will provide utilities within 25’ of the machine installation location.

0014 On-Site Training at Tinker Air Force Base

Firm Fixed Price Offeror shall provide three days of basic training to FIVE government employees per training class- as set forth in the Statement of Work, on operation, software and maintenance applicable to the items in CLINs 0001 through 0012. All training is to be conducted by contractor at Tinker AFB, Oklahoma, within one week after start-up of the equipment in CLINs 0001 through 0012.

LOT

TOTAL PRICE

SECTION 3 – CERTIFICATION OF RESPONSE

Contractor Statement (Check/Fill as applicable):

______The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition.

OR

______The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Offeror shall list exception(s) and rationale for the exception(s):

NAME OF OFFEROR’S REPRESENTATIVE TITLE

SIGNATURE DATE

Contractor is REQUIRED to sign this Combined Synopsis/Solicitation document and return 1 copy of this document to issuing office. Contractor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein. Contractor is required to provide commercial product literature for all items quoted above as required/requested.