C24-011 DILS CMXG Tools - Item Description.pdf

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

7 December 2023

MEMORANDUM FOR RECORD

SUBJECT: Item Description, C23-056 DILS CMXG Tools

1. The 76 CMXG is requesting utilization of funds for the purchase of DILS TOOLS.

2. The requested equipment item descriptions/specifications are outlined below.

a. The items listed below are required to fulfill this requirement.

1. Three (3) 10 drawer toolbox, steel, 2 fixed with locks casters, 2 swivel casters, 50"x25 1/4"x41." Dimensions need to be exact. Prefer Red color for standardization.

2. Three (3) 7 drawer toolbox, 27"x22 3/8"x28", top chest, no casters, steel.

Dimensions need to be exact. Prefer Red color for standardization.

3. Two (2) 3'x2'x6' Bin Cabinet, 126 bins. Dimensions need to be within 6 inches.

4. One (1) 7 1/4" Blade Dia Circular Saw

5. One (1) 7 1/4" Metal Cutting Saw Blade, 48 teeth, 5/8" arbor size, carbide tipped.

6. One (1) 9.5mm countersink bit, 3/8” body diameter, ¼” shank diameter, 7/8” shank length, 1 3/4” overall length, high speed steel, bright (uncoated). Dimensions need to be exact.

7. One (1) Air Driven Rivet Gun/Tool, 9/16" stroke length, 1940 lb-force pulling force, able to pull blind rivet diameters 3/32”, 1/8”, 5/32”, 3/16”.

8. One (1) 4-Way Digital Caliper 0" to 8" +/-.001" Accuracy

9. One (1) Deburring tool, rotary style, cuts 3/16” and above on aluminum

10. One (1) Drill bit 5.2mm, TiN finish, spiral flute, 52.00 mm flute length, 34.00 mm shank length, 86.00 mm overall length. Dimensions need to be exact.

11. One (1) Drill bit 6mm, TiN finish, spiral flute, 57.00 mm flute length, 36 mm shank length, 93.00 mm overall length. Dimensions need to be exact.

12. One (1) Hook wrench, 3/4" to 2" capacity

13. One (1) METRIC ALLEN (Hex) SET 9 PC SET with ball ends, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm.

14. One (1) METRIC ALLEN (Hex) WRENCHES- 3/8" SOCKET bit set METRIC 4, 5, 6, 7, 8, 9, 10 mm. 1-5/8” insert length, 2-23/32” overall length, alloy steel

15. Four (4) 30"x27 3/4"x59" modular drawer cabinet, 5 drawers, steel work surface, dimensions need to be within 6 inches

16. Three (3) Pneumatic RIVETER CHERRY MAX GUN 9/16" stroke length, 2100 lb-force pulling force, able to pull blind rivet diameters 3/32”, 1/8”, 5/32”, 3/16”.

17. Two (2) Pneumatic Screwdriver 13-70 IN/LB, 1/4", 1000 rpm

18. One (1) Rivet Tool, remove blind rivets sized 3/32", 1/8", 5/32", 3/16"

19. One (1) Flexible steel ruler, 2' long, 10ths and 100ths on one side, 32nds and 64ths on other, all inches

OC-ALC OBCA 2

20. Two (2) 12'x5'x8' (LxWxH) Maximum/8’x4’x5’ (LxWxH) Minimum 3-4 Rack Wire Shelves, steel frames and beams, boltless assembly, adjustable shelves with 2” increments, at least 1,000 lb capacity

21. One (1) Socket, 3/8" Drive, 8 mm, 12-point, tether ready, steel

22. One (1) Split (or lock) Ring Pliers, 0-degree tip angle

23. One (1) Stainless steel brush, wire scratch brush, stiff bristles, 10-1/2” overall length, 5” brush length, dimensions can be approximate

24. Three (3) Utility cart, 2 shelves, 750 lb load capacity, 46 1/2" shelf length, 25" shelf width, 33 1/4" top shelf height, 18 7/8" between shelves, 2 rigid/2 swivel, 4-sided lipped shelves, polypropylene. Dimensions need to be within 6 inches.

25. Four (4) 8'x3' (LxW) Table, Steel, at least 1,000 lb Capacity, at least 3’ Height, Length and Width dimensions need to be within 6 inches.

26. Three (3) Swivel Stool, 23 1/2" height, pneumatic lever, 22 1/2" min to 26 3/4" max, round, foam padding. Dimensions need to be within 6 inches.

27. Three (3) Tool tray, 29" length, 20" width, 38" to 48" height range, steel.

Dimensions need to be within 6 inches.

28. Six (6) ESD Laminate Workbenches 60” X 30” equipped with

a. 60” uprights

b. Overhead Light Frame 60X

c. 12 in shelf for 60X30 in Benches

d. Bin Rail: 30 in Overall Ht, 60 in Overall Wd, 1 1/2 in Overall Dp

e. Power Strip: 60 in Overall Wd, 1 1/2 in Overall Dp

29. Four (4) Modular Drawer Cabinet, 9 drawers, 59" H x 30" L x 27 3/4" W

30. Two (2) Black/Red Cabinet 48" L X 24" W X 78" H

31. Six (6) Galvanized Shelf Truck 48X24 48" L x 24" W X 69" H, 300-400 Lb.

Capacity per shelf, with wheels

32. Four (4) Utility Cart 45" L X 25" W X 33" H

33. One (1) Soldering Rework Station

a. Capable of Soldering, desoldering,

b. Be capable of supplying hot air without requiring shop air.

c. 3 independently controlled channels that can be used simultaneously.

d. digital controls

e. Must Include PS-90 iron, SX-100 desoldering iron and TT-65 tweezer.

f. Auto-off and temperature setback preserves tip life.

g. Have a self-contained Power supply.

34. Four (4) Warehouse Teardrop pallet racks shelving, 144" W x 48" D x 144-180" H and 5970 lbs. capacity

35. Two (2) Pallet Jack Manual, Standard Fork, 48 x 27". 5500 lbs. Minimum load capacity

36. Two (2) Instrument Cart/Workstation Mobile Instrument Platform; Equipped with surge protection power strip and 25' extension cord; Instrument Restraining Strap;

loading capacity of 75 lb. per shelf.

37. Four (4) Packing Station monitor Arm Support Flexible/adjustable.

38. Ten (10) Pneumatic Heavy Duty Casters, Min 3,120 Lbs. weight capacity per caster, able to lock into standard container ISO corner block

OC-ALC OBCA 3

2. Point of contact for this memorandum is Brett Stroud at (405) 736-2360 or e-mail at brett.stroud.1@us.af.mil.

Brett A Stroud, GS-11, DAF Program Management Specialist

OC-ALC OBCA

mailto:brett.stroud.1@us.af.mil