Item_Description.pdf

Item Description

Two (2) stationary hot ram coin dimplers with air coin post and two (2) sets of hot ram coin dimpler punch assemblies for cold and hot dimpling. Punch assemblies for fastener types and sizes are identified below. Hot dimplers shall have the salient characteristics listed below.

Two (2) Stationary Hot Ram Coin Dimplers with Air Coin Post:

• Shall have fully automatic electrical and pneumatic controls.

• Shall include operator, maintenance, and spare parts list manuals.

• Shall have 110VAC single phase with 60HZ input voltage.

• Shall operate in both cold and hot modes.

• Shall have pneumatic requirement range of 80-100 psi.

• Shall have throat height of 8".

• Shall have throat depth of 36".

• Shall have foot pedal with safety guard.

• Shall have digital dwell timer and temperature controller.

• Shall be capable of achieving a minimum of 700 degrees F.

• Shall have max pressure minimum of 20,000 lbs at 90 psi.

Coin Dimple Punch Assemblies:

2 ea. - PUNCH DIMPLE AN426 Rivet (100°) 3/32” 2 ea. - PUNCH DIMPLE AN426 Rivet (100°) 1/8” 2 ea. - PUNCH DIMPLE AN426 Rivet (100°) 5/32” 2 ea. - PUNCH DIMPLE AN426 Rivet (100°) 3/16” 2 ea. - PUNCH DIMPLE AN426 Rivet (100°) ¼” 2 ea. - PUNCH DIMPLE AN & NAS Screw (100°) #6 2 ea. - PUNCH DIMPLE AN & NAS Screw (100°) #8 2 ea. - PUNCH DIMPLE AN & NAS Screw (100°) #10 2 ea. - PUNCH DIMPLE AN & NAS Screw (100°) #1/4 2 ea. - PUNCH DIMPLE AN & NAS Screw (100°) #5/16 2 ea. - PUNCH DIMPLE Blind Rivet (100°) (Huck, Cherry) 1/8” 2 ea. - PUNCH DIMPLE Blind Rivet (100°) (Huck, Cherry) 5/32” 2 ea. - PUNCH DIMPLE Blind Rivet (100°) (Huck, Cherry) 3/16”

DEPARTMENT OF THE AIR FORCE

OKLAHOMA CITY AIR LOGISTICS COMPLES (OC-ALC)

TINKER AIR FORCE BASE OKLAHOMA