The file's text, extracted by GovTribe without its formatting.
Commodity Item Description for the Electric Stand Up Tugs
| A |
| Quantity required – four (4) each Raymond Part Number 8610 or Equivalent |
| B |
| Must be design for use with the operator riding in the standing position |
| C |
| Must not require the operator to walk behind the unit for operation |
| D |
| Must be Type “E” Underwriters’ Laboratories (U.L.) approved |
| E |
| Must include new battery rated at 500 Ah minimum |
| F |
| Must include on-board automatic 110 volt charger |
| G |
| Must have a capacity rating of 10,000 lb. or more |
| H |
| Must have a minimum draw bar pull capacity of 700 lbs |
| I |
| Must have a turning radius of 56 inches or less |
| J |
| Must be equipped with brakes |
| K |
| Must have an electric horn |
| L |
| Must have audible alarm for reverse operations |
| M |
| Must have tilt steering or adjustable steering |
| N |
| Must have power/assist steering |
| O |
| Drive tire must be polyurethane or rubber |
| P |
| Must include heavy duty castors |
| Q |
| Must not require a key to operate – Key-less operation |
| R |
| Must operate on 24 volts |
| S |
| Speed must be able to be governed down to a maximum speed of 5 MPH |
| T |
| Must have cushioned knee pads and back pads |
| U |
| Must include parts/maintenance/operator manual(s) |
| V |
| Must include plate and bolts to give ability to add pintle hook |
20 December 2016 Page 1 of 1