FA8125-15-Q-0024_AUG_04.pdf

FA8125-15-Q-0024

Combined Synopsis/Solicitation

(IAW FAR 12.603)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

The Oklahoma City-Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base, Oklahoma intends to negotiate a firm fixed price contract for the acquisition of non-personal services. This solicitation is being issued as a Request for Quotation (RFQ) FA8125-15-Q-0024, for a firm fixed type contract for Preventive & Remedial Maintenance and On-Site Technical support on the REFORM High Speed Grinder at Tinker AFB, OK. The Oklahoma City-Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma intends to award a sole source contract to

REFORM.

Contractor is required to sign this document and return 1 copy to issuing office. Contractor agrees to provide all services set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

Proposal Submission Information:

Proposals are due by 14 August 2015, 3:00 PM, Tinker AFB OK Central Standard Time (CST).

Contact the following individual for information regarding this solicitation:

NOTE: Emailed proposals are preferred John J. Juarez Contract Specialist John.juarez.1@us.af.mil Phone: (405) 739-2510

EVALUATION OF RESPONSES:

Award will be conducted and evaluated under the provisions of FAR Part 12, Commercial Items, FAR Part 13, Simplified Acquisition Procedures, and FAR Part 15, Contracting by Negotiation. The responsible offerors must be registered in the System for Award Management (SAM) database (available at: https://www.sam.gov/portal/public/SAM/ ) and submit a completed copy of the Offeror Representations and Certifications – Commercial Items with their proposal.

Lack of registration in SAM will qualify contractor as ineligible for award. All responsible sources may submit a proposal in response to this solicitation, which shall be considered. This solicitation is being issued as a Request for Quote (RFQ) for a firm fixed price type commercial contract. The Oklahoma City-Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma intends to issue a sole-source commercial contract for Preventive & Remedial Maintenance and On-Site Support maintenance support on the REFORM High Speed Grinder.

mailto:John.juarez.1@us.af.mil https://www.sam.gov/portal/public/SAM/

SIGNATURE OF OFFEROR:

DATE:

REQUISITION NUMBER:

F3YCEB5126AQ01

SOLICITATION NUMBER

SOLICITATION ISSUE DATE:

04 August 2015

SOLICITATION DUE DATE:

14 August 2015

THIS ACQUISITION IS:

Full and Open Competition

X Sole Source:

Service requires rights to proprietary only the OEM has.

SIZE STD:

500 Employees

FEDERAL SUPPLY CLASS:

J034

NAICS: 333517 DELIVERY:

X

SEE ITEM DESC

FOB DESTINATION

FOB ORIGIN

DPAS RATING:

METHOD OF SOLICITATION:

REQUEST FOR QUOTE

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Preventive & Remedial Maintenance

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform the Preventive and Remedial Maintenance (PM/RM) of the Reform High Speed Blade Tip Grinder to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A. Preventive Maintenance Includes: 1 REFORM CNC electronic / software technician, 1 REFORM CNC mechanic technician. Remedial Maintenance Includes: 1 REFORM CNC technician, 200 working hours, tele-service (if required) per year, 25 working hours (electric/software technician) Period of Performance (POP): 1 September 2015--31 August 2016.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for Preventive & Remedial Maintenance for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.2-1.4.

**Total FFP $:__________________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:________________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NSN: J034-15-JJJ-SVCS

PURCHASE REQUEST NUMBER: F3YCEB5126AQ01

SIGNAL CODE: A

NET AMT

0002 1 Lot On-Site Technical Support

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform on-site maintenance and technical support to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC) during a six (6) week period of Performance (PoP) to be determined tentatively October- November 2015 timeframe. Contractor shall provide 1 technician that meets the qualifications seven (7) days a week, eight (8) hours a day during specified six week period. Additionally, the Contractor shall provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.);

hearing and eye protection, to include prescription safety glasses; safety harnesses;

fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A which is the equipment list.

Period of Performance (POP): 1 September 2015--31 August 2016.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for On-Site Technical Support for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.5.

**Total FFP $:_______________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NSN: J034-15-JJJ-SVCS

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE TBN

0003 Lot Over & Above On-Site Maintenance

FFP

In accordance with (IAW) DFARS 252.217-7028, the Contractor shall provide Over & Above labor and materials for work within scope in support of regaining full operational capability status of the REFORM GRINDER. The contractor shall not initiate work prior to receiving Contract Officer authorization via an approved bilateral modification. All services shall be provided IAW the Performance Work Statement.

Period of Performance (POP): 1 September 2015--31 August 2016.

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

FOB: Destination

NSN: J034-15-JJJ-SVCS

1001 Lot OPTION Preventive & Remedial Maintenance

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform the Preventive and Remedial Maintenance (PM/RM) of the Reform High Speed Blade Tip Grinder to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A. Preventive Maintenance Includes: 1 REFORM CNC electronic / software technician, 1 REFORM CNC mechanic technician. Remedial Maintenance Includes: 1 REFORM CNC technician, 200 working hours, tele-service (if required) per year, 25 working hours (electric/software technician) Period of Performance (POP): 1 September 2016--31 August 2017.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for Preventive & Remedial Maintenance for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.2-1.4.

**Total FFP $:__________________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:________________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NSN: J034-15-JJJ-SVCS

1002 Lot OPTION On-Site Technical Support

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform on-site maintenance and technical support to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC) during a six (6) week period of Performance (PoP) to be determined tentatively October- November 2015 timeframe. Contractor shall provide 1 technician that meets the qualifications seven (7) days a week, eight (8) hours a day during specified six week period. Additionally, the Contractor shall provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.);

hearing and eye protection, to include prescription safety glasses; safety harnesses;

fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A which is the equipment list.

Period of Performance (POP): 1 September 2016--31 August 2017.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for On-Site Technical Support for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.5.

**Total FFP $:_______________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

1003 Lot OPTION Over & Above On-Site Maintenance

FFP

In accordance with (IAW) DFARS 252.217-7028, the Contractor shall provide Over & Above labor and materials for work within scope in support of regaining full operational capability status of the REFORM GRINDER. The contractor shall not initiate work prior to receiving Contract Officer authorization via an approved bilateral modification. All services shall be provided IAW the Performance Work Statement.

Period of Performance (POP): 1 September 2016--31 August 2017.

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

FOB: Destination

2001 Lot OPTION Preventive & Remedial Maintenance

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform the Preventive and Remedial Maintenance (PM/RM) of the Reform High Speed Blade Tip Grinder to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A. Preventive Maintenance Includes: 1 REFORM CNC electronic / software technician, 1 REFORM CNC mechanic technician. Remedial Maintenance Includes: 1 REFORM CNC technician, 200 working hours, tele-service (if required) per year, 25 working hours (electric/software technician) Period of Performance (POP): 1 September 2017--31 August 2018.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for Preventive & Remedial Maintenance for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.2-1.4.

**Total FFP $:__________________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:________________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

2002 Lot OPTION On-Site Technical Support

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform on-site maintenance and technical support to ensure proper operation and minimal downtime of the REFORM High Speed Blade Tip Grinder located at Post X-73, Building 3001 of the Oklahoma City–Air Logistics Complex (OC-ALC) during a six (6) week period of Performance (PoP) to be determined tentatively October- November 2015 timeframe. Contractor shall provide 1 technician that meets the qualifications seven (7) days a week, eight (8) hours a day during specified six week period. Additionally, the Contractor shall provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.);

hearing and eye protection, to include prescription safety glasses; safety harnesses;

fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS). The equipment is listed in Appendix A which is the equipment list.

Period of Performance (POP): 1 September 2017--31 August 2018.

***Pricing: Pricing is for a Firm Fixed Price (FFP) for On-Site Technical Support for the REFORM High speed Grinder to maintain operational status IAW PWS paragraph 1.5.

**Total FFP $:_______________

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

2003 Lot OPTION Over & Above On-Site Maintenance

FFP

In accordance with (IAW) DFARS 252.217-7028, the Contractor shall provide Over & Above labor and materials for work within scope in support of regaining full operational capability status of the REFORM GRINDER. The contractor shall not initiate work prior to receiving Contract Officer authorization via an approved bilateral modification. All services shall be provided IAW the Performance Work Statement.

Period of Performance (POP): 1 September 2017--31 August 2018.

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES

THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:_______________

FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 POP 01-SEP-2015 TO

31-AUG-2016

N/A F3YCEB

TERRI YOUNG

OC-ALC/OBWK

BLDG 3001 STAFF DR. DOOR G70 POST

N68

TINKER AFB OK 73145

405-582-9199 FOB: Destination

F3YCEB

0002 POP 01-SEP-2015 TO

31-AUG-2016

N/A (SAME AS PREVIOUS LOCATION)

F3YCEB

0003 POP 01-SEP-2015 TO

31-AUG-2016

N/A N/A

1001 POP 01-SEP-2016 TO

31-JUL-2017

1002 POP 01-SEP-2016 TO

31-AUG-2017

1003 POP 01-SEP-2016 TO

31-AUG-2017

2001 POP 01-SEP-2017 TO

31-AUG-2018

2002 POP 01-SEP-2017 TO

2003 POP 01-SEP-2017 TO

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions NOV 2013 52.203-3 Gratuities APR 1984 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(Sep 2006) -- Alternate I

OCT 1995

52.203-12 Limitation On Payments To Influence Certain Federal Transactions

OCT 2010

52.203-13 Contractor Code of Business Ethics and Conduct APR 2010

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier Subcontract

Awards

JUL 2013

52.204-13 System for Award Management Maintenance JUL 2013 52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

DEC 2014

52.209-5 Certification Regarding Responsibility Matters APR 2010 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

AUG 2013

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

DEC 2014

52.219-8 Utilization of Small Business Concerns OCT 2014 52.219-14 Limitations On Subcontracting NOV 2011 52.222-1 Notice To The Government Of Labor Disputes FEB 1997 52.222-3 Convict Labor JUN 2003 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-22 Previous Contracts And Compliance Reports FEB 1999 52.222-26 Equal Opportunity APR 2015 52.222-35 Equal Opportunity for Veterans JUL 2014 52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014 52.222-37 Employment Reports on Veterans JUL 2014 52.222-41 Service Contract Labor Standards MAY 2014 52.222-50 Combating Trafficking in Persons MAR 2015 52.222-55 Minimum Wages Under Executive Order 13658 DEC 2014 52.223-3 Hazardous Material Identification And Material Safety Data JAN 1997 52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011 52.223-11 Ozone-Depleting Substances MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

DEC 2012

52.229-3 Federal, State And Local Taxes FEB 2013 52.232-23 Alt I Assignment of Claims (May 2014) - Alternate I APR 1984 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-2 Service Of Protest SEP 2006 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-1 Site Visit APR 1984 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.237-3 Continuity Of Services JAN 1991 52.242-13 Bankruptcy JUL 1995 52.242-15 Stop-Work Order AUG 1989 52.247-34 F.O.B. Destination NOV 1991 52.253-1 Computer Generated Forms JAN 1991 252.201-7000 Contracting Officer's Representative DEC 1991

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7001 Prohibition On Persons Convicted of Fraud or Other Defense- Contract-Related Felonies

DEC 2008

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7012 Safeguarding of Unclassified Controlled Technical

Information

NOV 2013

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

DEC 2014

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials

SEP 2014

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.239-7001 Information Assurance Contractor Training and Certification JAN 2008 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.246-7000 Material Inspection And Receiving Report MAR 2008

CLAUSES INCORPORATED BY FULL TEXT

52.204-3 TAXPAYER IDENTIFICATION (OCT 1998)

(a) Definitions.

Common parent, as used in this provision, means that corporate entity that owns or controls an affiliated group of corporations that files its Federal income tax returns on a consolidated basis, and of which the offeror is a member.

Taxpayer Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service (IRS) to be used by the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number or an Employer Identification Number.

(b) All offerors must submit the information required in paragraphs (d) through (f) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the IRS. If the resulting contract is subject to the payment reporting requirements described in Federal Acquisition Regulation (FAR) 4.904, the failure or refusal by the offeror to furnish the information may result in a 31 percent reduction of payments otherwise due under the contract.

(c) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.

(d) Taxpayer Identification Number (TIN).

___ TIN:.--------------------------------------------------------

___ TIN has been applied for.

___ TIN is not required because:

___ Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;

___ Offeror is an agency or instrumentality of a foreign government;

___ Offeror is an agency or instrumentality of the Federal Government.

(e) Type of organization.

___ Sole proprietorship;

___ Partnership;

___ Corporate entity (not tax-exempt);

___ Corporate entity (tax-exempt);

___ Government entity (Federal, State, or local);

___ Foreign government;

___ International organization per 26 CFR 1.6049-4;

___ Other--------------------------------------------------------

(f) Common parent.

___ Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision.

___ Name and TIN of common parent:

Name-------------------------------------------------------------------

TIN--------------------------------------------------------------------

(End of provision)

CLAUSES INCORPORATED BY FULL TEXT

52.204-7 SYSTEM FOR AWARD MANAGEMENT (JULY 2013)

(a) Definitions. As used in this provision--

Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc.

(D&B) to identify unique business entities.

Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.)

This 4-character suffix may be assigned at the discretion of the business concern to establish additional System for Award Management records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same parent concern.

Registered in the System for Award Management SAM database means that--

(1) The offeror has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see Subpart 4.14) into the SAM database;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number--

(i) Via the Internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and Zip Code.

(iv) Company Mailing Address, City, State and Zip Code (if separate from physical).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of clause)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (APR 2014)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

https://www.acquisition.gov/

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers.

Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone

(215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,000, and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management https://assist.dla.mil/online/start/ http://quicksearch.dla.mil/ http://assistdocs.com/ https://assist.dla.mil/wizard/index.cfm

(SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address. The DUNS +4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (MAR 2015)

ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision--http://www.acquisition.gov/

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ . [Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern.