FA811714R0013.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8117-14-R-0013

6.SOLICITATION ISSUE DATE

6 FEB 2014

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336413

8(A) SIZE STANDARD: 1,000

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

Sole Source to BAE Systems Control Inc. Cage Code:63760

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) (1 ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *120

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8117

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Estimated

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Other Aircraft Part and Auxiliary Equipment Manufacturing

9.

LATE OFFERS ARE SUBJECT TO LATE PROPOSAL PROVISIONS INCORPORATED HEREIN. ALL OFFERS ARE SUBJECT TO SUCH PROVISIONS, REPRESENTATIONS, CERTIFICATIONS AND SPECIFICATIONS AS ARE ATTACHED OR INCORPORATED BY REFERENCE.

SOLICITATION: OFFERS WILL BE RECEIVED AT THE ISSUING OFFICE UNTIL

10-MAR-2014 3:00PM

X

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZABA

3001 STAFF DR STE 1AC4 97E

TINKER AFB OK 73145-3015

BUYER: Stefanie Wiles/AFSC/PZABA stefanie.wiles@tinker.af.mil Phone: (405) 739- 4408 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

SOLICITATION NO. FA811714R0013

DUE: 10 MAR 2014 3:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Stefanie Wiles/AFSC/PZABA

DEPARTMENT OF THE AIR FORCE, AFSC PZABA

3001 STAFF DR STE 1AC4 97E

TINKER AFB OK 73145-3015

Request for Proposal FA8117-14-R-0013

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Repair - Computer Fuel Manager - Informational

Item No.

Firm Fixed Price

CLIN ACRN ACRN Total

0001 AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Applicability: KC-135R ;

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 8 EA *45 Calendar Days

Proposed Delivery

B SW3211 8 EA

Delivery shall be 8 ea every 45 calendar days after reciept or order or repairable assets, whichever is later, until order has been fullfilled. Early delivery is acceptable. Transportation Account Code: F2RS

Repair - Computer Fuel Manager - Base Year

Item No.

0001AA

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

40 EA

CLIN ACRN ACRN Total

0001AA AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 8 EA *45 Calendar Days

Proposed Delivery

B SW3211 8 EA

Delivery shall be 8 ea every 45 calendar days after reciept or order or repairable assets, whichever is later, until order has been fullfilled. Early delivery is acceptable. Transportation Account Code: F2RS

Repair - Computer Fuel Manager - Option Year 1

Item No.

0001AB

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

40 EA

CLIN ACRN ACRN Total

0001AB AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 8 EA *45 Calendar Days

Proposed Delivery

B SW3211 8 EA

Delivery shall be 8 ea every 45 calendar days after reciept or order or repairable assets, whichever is later, until order has been fullfilled. Early delivery is acceptable. Transportation Account Code: F2RS

Repair - Computer Fuel Manager - Option Year 2

Item No.

0001AC

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

40 EA

CLIN ACRN ACRN Total

0001AC AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 8 EA *45 Calendar Days

Proposed Delivery

B SW3211 8 EA

Delivery shall be 8 ea every 45 calendar days after reciept or order or repairable assets, whichever is later, until order has been fullfilled. Early delivery is acceptable. Transportation Account Code: F2RS

No Fault Found - Computer Fuel Manager - Informational

Item No.

Firm Fixed Price

CLIN ACRN ACRN Total

0002 AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 1 EA *30 Calendar Days

Proposed Delivery

B SW3211 1 EA

Delivery shall be 1 ea every 30 calendar days after reciept or order or repairable assets, whichever is later. Early delivery is acceptable. Transportation Account Code: F2RS

No Fault Found - Computer Fuel Manager - Base Year

0002AA

Firm Fixed Price

No Fault Found - Computer Fuel Manager - Base Year

Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

CLIN ACRN ACRN Total

0002AA AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 1 EA *30 Calendar Days

Proposed Delivery

B SW3211 1 EA

Delivery shall be 1 ea every 30 calendar days after reciept or order or repairable assets, whichever is

No Fault Found - Computer Fuel Manager - Option Year 1

0002AB

No Fault Found - Computer Fuel Manager - Option Year 1

Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

CLIN ACRN ACRN Total

0002AB AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 1 EA *30 Calendar Days

Proposed Delivery

B SW3211 1 EA

Delivery shall be 1 ea every 30 calendar days after reciept or order or repairable assets, whichever is

No Fault Found - Computer Fuel Manager - Option Year 2

0002AC

No Fault Found - Computer Fuel Manager - Option Year 2

Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

CLIN ACRN ACRN Total

0002AC AA

NSN: 6610-01-435-2935

COMPUTER,FUEL MANAG

The FMAC uses measured aircraft data and crew-supplied flight plan information to compute and display continuous fuel quantity, Center of Gravity (CG), Air Refueling (AIR fuel transfer, and in-flight advisories to minimize fuel consumption.

Metallic titanium Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Physical Item Markings:

IAW MIL-STD-130

Latest Cost Amount: $60,652.05 Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

B SW3211 1 EA *30 Calendar Days

Proposed Delivery

B SW3211 1 EA

Delivery shall be 1 ea every 30 calendar days after reciept or order or repairable assets, whichever is

Over and Above

Quantity U/I Unit Price Amount

Over and Above

1 LO To be Negotiated To be Negotiated

CLIN ACRN ACRN Total

0003 AA

Over and Above Associated Document(s) Line Item(s)

FD20301400397 0003

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Type / Ship To PACRN Mark For

B SW3211 PAD

Type / Ship To Quantity (U/I) To be determined_ Req No / Pri

Required Delivery

B SW3211 1 LO TBD

Proposed Delivery

B SW3211 1 LO

Non-Recurring Item Identification and Valuation

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

CLIN ACRN ACRN Total

0004 AA

NOTE: DCMA will complete inspection/acceptance of Item Identification and Valuation at the time of final inspection of the first asset.

NSN: 6610-01-435-2935

FUEL MANAGEMENT ADV

COMPUTES FUEL MANAGEMENT OF EACH TANK, INCLUDING CENTER OF GRAVITY, FUEL WARNING, THRUST AND FUEL MANAGEMENT, MISSION PLANNING, NAVIGATION, AND BUILT-IN TEST.DIMENSIONS:

9.800 INCHES HIGH BY 9.220 INCHES LONG. CONTENT: CAST ALUMINUM. AIRCRAFT: KC135.

Manufacturer Part Number 07690 490200-05-01 Associated Document(s) Line Item(s)

FD20301400397 0004

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Class I ODS Substance Application/Use Quantity

OZONE

none

Data

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO Not Separately Priced Not Separately Priced

CLIN ACRN ACRN Total

0005 AA

Data Data: Not seperately priced IAW DD1423 Associated Document(s) Line Item(s)

FD20301400397 0005

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Wide Area Work Flow Quality Assurance: Standard Inspection

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: B SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION C

DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK

252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS

(NOV 2005)

(IAW DFARS 211.273-4)

(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).

(d) (Offeror insert information for each SPI process)

SPI Process: _____________________________________________________

Facility: _________________________________________________________

Military or Federal Specification or Standard: ____________________________

Affected Contract Line Item Number, Subline Item Number, Component, or Element:

(Applicable when procuring previously developed items that exceed the micro-purchase threshold)

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

ITEM IDENTIFICATION MARKING AND SHELF LIFE ITEM PROVISIONS (FEB 1998)

(IAW AFMCI 23-102 Chapter 6 Para 6.2.7.3) Requirements set forth below shall apply to any contract issued thereon and will take precedence over other inconsistent requirements herewith. All standards, bulletins, and publications referenced herein shall be of the issue in effect on the date of this document.

1. PHYSICAL MARKING OF ITEMS:

MIL-STD-130: Items shall be marked in accordance with MIL-STD-130. The National Stock Number (NSN), and when assigned, the Configuration Item Identifier (CII), serial number, and military type designation information shall be marked on major assemblies, units, groups, and sets. Special attention must be given to requirements governing the application of the actual manufacturer's Federal Supply Code for Manufacturers (FSCM) to the physical item. Items which are excluded in accordance with paragraph 1.1 of MIL-STD-130, Revision M, shall be marked in accordance with the appropriate document.

2. PACKAGE AND CONTAINER MARKING: Shipments will not be made until the NSN has been assigned, unless specifically authorized by the Contracting Officer.

MIL-STD-129/ASTM-D-3951:

a. Interior packages and shipping containers shall be marked in accordance with MIL-STD-129 when Military packing is specified and ASTM-D-3951 when commercial packaging is specified. The requirements of paragraph 2.h apply regardless of which packaging is utilized.

(1) Design manufacturer's name, trademark or manufacturer's code (from Cataloging Handbook H4-1 or H4-2), identifying number, and serial number, when applicable, shall be included in the identification marking.

(2) When applicable, the Air Force project designator code shall be included as the last line of the address marking and the project name related to the project code shall be marked in the clear on the exterior shipping container.

b. Tags and labels, when required, shall be contractor's tags or labels conforming to the requirements of MIL-STD-129 or as approved by the procuring activity. Contractor's forms which indicate serviceable condition shall not be any shade of green or red. Labels are authorized to be used on metal containers.

Items requiring technical order (T.O.) certification shall be annotated on inner and outer container tags or label with T.O. compliance.

c. When dummy containers are used in a unitized load, the dummy containers shall be clearly marked "DUMMY CONTAINER" and located in the load so that the marking will be plainly visible to receiving and storage personnel.

d. All interior packages and shipping containers for articles and materials classified as hazardous or restricted under provisions of Title 49, Code of Federal Regulations, or AFR 71-4/DLAM 4145.3/TM 38-250/NAVSUP PUB 505/MCO P 4030.19 shall be marked, regardless of exemption for mode of transportation, with proper shipping name of item; flash point of all liquids having a flash point of 200 degrees F. or below; and percentage concentration of acids and corrosive liquids. In addition, the quantity of each hazardous or restricted material included in a container shall be annotated adjacent to the shipping name of the item, e.g., Acetic Acid (80% concentration) -- 1 qt.

e. On shipments of firearms regardless of mode of transportation, selected elements of identification and contractor data markings shall be omitted or obliterated in accordance with the requirements of MIL-STD-129 regarding sensitive items and packing lists shall be placed only inside the containers.

f. Special markings for packages and containers when specified on AFMC Form 158 shall be complied with as a part of MIL-STD-129.

g. All special coated terneplate containers shall be marked with the legend "CAUTION--DO NOT REUSE AS

FOOD CONTAINERS."

h. Bar code markings in accordance with MIL-STD-129 shall apply to all units, intermediate and exterior containers for all items going into stock regardless of package size or levels of package specified (including commercial packaging). In addition to the NSN/NATO stock number, the exterior shipping container shall include the 13 digit contract number (plus, if applicable, the four digit call number). Excluded from Bar Code Marking are:

(1) Foreign Military Sales.

(2) Direct Vendor Delivery (DVD)/Government Furnished Equipment (GFE) shipments.

(3) Multipack Exterior Shipping Containers. (Unit and intermediate containers do require a bar coded NSN/NATO stock number. However, the next container (unit or intermediate) inside the multipack will also require a bar coded NSN/NATO stock number and contract number with call number, if applicable, in the lower right hand corner).

(4) All unpacked or uncrated items; e.g., vehicles, tires, etc.

i. Shipments of wheeled items weighing 2,000 pounds or more and scheduled for transportation by military aircraft will be marked with the individual axle weights in accordance with MIL-STD-129.

3. WARRANTED ITEMS: When the contract contains warranty requirements, warranty information shall be applied on containers and items as follows:

a. Container markings shall be as specified in MIL-STD-129. The period or conditions of the warranty shall be specifically stated, i.e., landings, flight hours, operating hours, days from shipping date, etc.

b. Items shall be marked in accordance with requirements of MIL-STD-130. Markings shall be located in a manner so as to be conspicuous to the person removing the item from service. When no deleterious effect or functional degradation is caused, the markings shall be black letters on yellow FED-STD-595 color 13655) background. The marking shall include the same period or condition required on the containers.

4. SHELF LIFE ITEMS

a. MARKING

(1) Shelf life items shall be marked in accordance with MIL-STD-129.

(2) Mark items controlled in MIL-STD-1523, or in specifications furnished as a part of the contract or purchase order, with the cure or assembly dates specified therein.

b. DELIVERY. Unless specified otherwise in the contract, shelf life items shall have a minimum of 90% of the "storage period" remaining at the time of delivery to the Government.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.304)

(Applicable for fixed-price services, or supplies furnishing services over the simplified acquisition threshold)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999)

(IAW FAR 46.311, DFARS 246.202-4(1))

The Contractor shall comply with the higher-level quality standard selected below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).

Item No(s): 0005

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

(Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

_________Invoice and Receiving Report___________________________________________________ (Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

________Source________________________________________________________ (Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Page 1, Block 14 Issue By DoDAAC FA8117 Admin DoDAAC Page 1, Bock 12 Inspect By DoDAAC Cognizant DCMA Office DoDAAC Ship To Code See Schedule Ship From Code Contractor Facility Code

Mark For Code See Schedule Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

______________james.blackstone@us.af.mil____________________________________________ (Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

____________john.surret@tinker.af.mil___________________________________________________ (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(The above Clause/Provision has been modified.)

(Applicable when 252.232-7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

ACRN TOTAL $ 0.00

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (NOV 2012)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, interested party may contact the ombudsman, AFSC/PZC at 405 736 -3273 , FAX 000 000 -0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU or AFISRA ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number

(571) 256-2397, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (APR 1984)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (OCT 2010)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (JAN 1997)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (JAN 1997)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO

INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013)

(IAW FAR 3.908-9)

(Applicable to solicitations and contracts that exceed the simplified acquisition threshold)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUL 2013)

(IAW FAR 4.1403(a))

(Applicable over $25,000, unless not required to be reported in FPDS)

252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013)

(IAW DFARS 204.404-70(a)) (Applicable when the contractor will have access to or generate unclassified information that may be sensitive and inappropriate for release to the public)

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (DEC 1991)

(IAW DFARS 204.7104-1(b)(3)(iv)) (Applicable to all not separately priced subline items)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b)) (Applicable to all orders issued hereunder)

252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION

(NOV 2013)

(IAW DFARS 204.7303)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(AUG 2013)

(IAW FAR 9.409)

(Applicable when exceeding $30,000)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A TERRORIST COUNTRY (DEC 2006)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(vi))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of not to exceed the estimated quantity as specified in Section B;

(2) Any order for a combination of items in excess of not to exceed the estimated quantity as specified in Section B; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 30 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-21 REQUIREMENTS (OCT 1995)

(IAW FAR 16.506(d)(1))

(f) the Contractor shall not be required to make any deliveries under this contract after 90 days beyond the expiration of the ordering period unless otherwise agreed upon by both parties.

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from the effective date of the contract to one year for the basic year. If applicable, any options that are exercised will extend the contract ordering period by twelve months..

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 3 year

(Applicable when the Government gives the contractor a preliminary written notice of its intent to extend the contract, or an extension of the contract includes an extension of the option, or a there is a specified limitation on the total duration of the contract)

252.217-7028 OVER AND ABOVE WORK (DEC 1991)

(IAW DFARS 217.7702)

(Applicable when containing requirements for over and above work, except as provided for in Subpart 217.71)

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (JUL 2013)

(IAW FAR 19.708(a)) (Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(d))

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

(Applicable in solicitations and contracts exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas)

52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)

(IAW FAR 22.103-5(a), AFFARS 5322.101-1) (IAW FAR 22.101-1(e), Applicable when the head of the contracting activity designates programs or requirements for which it is necessary that contractors be required to notify the Government of actual or potential labor disputes that are delaying or threaten to delay the timely contract performance (see 22.103-5(a)).

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

(Applicable when performance is in the U.S., Puerto Rico, Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands, unless subject to the Walsh-Healey Public Contracts Act, purchase is from Federal Prisons Industries, Inc., or purchase is from any State prison of finished supplies that may be secured in the open market/existing stocks, as distinguished from supplies requiring special fabrication, and exceeds the micro-purchase threshold)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999)

(IAW FAR 22.810(a)(1)) (Applicable when exceeding $10,000, except those exempted by FAR 22.807 (b) which includes those for work to be performed outside the U.S. by employees who were not recruited within the U.S.)

52.222-26 EQUAL OPPORTUNITY (MAR 2007)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (SEP 2010)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1)) (Applicable when the expected value is $100,000 or more except when work is performed outside the United States by employees recruited outside the United States or the Director, Office of Federal Contract Compliance Programs, has waived, in accordance with 22.1305(b), all of the terms of the clause)

52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

(IAW FAR 22.1408(a)) (Applicable over $15,000 except when performance of work and recruitment of workers will occur outside the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island, or the agency head has waived, in accordance with 22.1403(a) or 22.1403(b) all the terms of the clause)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (SEP 2010)

(IAW FAR 22.1310(b)) (Applicable when the expected value is $100,000 or more and workers were recruited within the United States)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR

RELATIONS ACT (DEC 2010)

(IAW FAR 22.1605)

(Applicable to all solicitations and contracts except under the simplified acquisition threshold, for work performed exclusively outside the U.S., or covered in their entirety by an exemption granted by the Secretary)

52.222-41 SERVICE CONTRACT ACT OF 1965 (NOV 2007)

(IAW FAR 22.1006(a)) (Applicable to services over $2,500)

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 1989)

(IAW FAR 22.1006(b)) This Statement is for Information Only:

It is not a Wage Determination

Employee Class Monetary Wage Fringe Benefits

23.43 36.25% Aircraft Quality Control Inspector 24.45 36.25% Electronics Technician, Maintenance III

23.43 36.25%

Production Control Clerk 16.89 36.25% Shipping/Receiving Clerk 16.90 36.25% Supply Technician 18.77 36.25%

(Applicable to service items over $2,500)

52.222-43 FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT ACT--PRICE

ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS) (SEP 2009)

(IAW FAR 22.1006(c)(1))

52.222-50 COMBATING TRAFFICKING IN PERSONS (FEB 2009)

(IAW FAR 22.1705(a))

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(IAW FAR 23.505)

(Applicable when the simplified acquisition threshold is exceeded except if performance is entirely outside the U.S.

and its outlying areas)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306)

(Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a)) (Applicable to supplies or services involving the furnishing of supplies unless an exception applies)

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013)

(IAW DFARS 225.7002-3(a)) (Applicable when exceeding the simplified acquisition threshold for food; clothing; tents, tarpaulins or covers; cotton and other natural fiber products; woven silk or woven silk blends; spun silk yarn for cartridge cloth; synthetic fabric, coated synthetic fabric; canvas products; wool; or any item of individual equipment (FSC 8465) manufactured from or containing such fibers, yarns, fabrics, or materials; to waste and byproducts of cotton or wool used in the production of propellants and explosives)

252.225-7013 DUTY-FREE ENTRY (OCT 2013)

(IAW DFARS 225.1101(4))

(Applicable to contracts requiring duty free entry of goods into the United States)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1)) (Applicable except when both complete performance and delivery are outside the United States)

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (DEC 2007)

(IAW FAR 27.201-2(b))

(Applicable when the simplified acquisition threshold is exceeded except when both complete performance and delivery are outside the United States unless supplies are ultimately to be shipped into one of those areas)

52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)

(FEB 2013)

(IAW FAR 29.401-3(b))

(Applicable when the simplified acquisition threshold is exceeded and fixed-price noncompetitive, and performed wholly or partly within the United States, its possessions or territories, Puerto Rico or the Northern Mariana Islands)

52.232-1 PAYMENTS (APR 1984)

(IAW FAR 32.111(a)(1)) (Applicable to fixed-price supply or services and non-regulated communication services).

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1)) (Applicable to fixed-price supply or fixed-price service)

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2)) (Applicable to fixed-price supply, fixed-price service, or transportation)

52.232-17 INTEREST (OCT 2010)

(IAW FAR 32.611(a), FAR 32.611(b)) (Applicable when exceeding the simplified acquisition threshold)

52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986)

(IAW FAR 32.806(a)(1)) (Applicable when the micro-purchase threshold is exceeded, unless the contract will prohibit the assignment of claims (see 32.803(b))

52.232-25 PROMPT PAYMENT (JUL 2013)

(IAW FAR 32.908(c))

(a) Invoice payments—

(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance.