QuestionsAnswers_FA7000-16-T-0146.docx

QUESTIONS AND ANSWERS RECEIVED FOR SOLICITATION fa7000-16-T-0146 REGARDING BAXTER MODEL OVENS OV500G2-EE GAS OVENS OR EQUAL

1. Inside delivery can be interpreted many ways. It could mean within 5’ of loading dock or inside to the location where installation is to take place. If it is where installation is to take place I will need below answered per Baxter-

Door opening at dock: (needed – regardless of above choice)

If room of where service is to take place see below (room of choice or full service section).

Delivery Site Info is Mitchell Hall

Answer:

Full size overhead door at dock level, dock is full size with ramp. Delivery to dock and installer should transport from truck to install location, second floor kitchen.

2. The manufacturer would like to know what are the dimensions of the freight elevator?

Answer:

Freight elevator to second floor only is 8 ft. H x 9.9 Ft w x 13.1 ft. D with a max weight if 13,500 lbs. The elevators that will be used to get pieces from second floor to kitchen level are slightly smaller with a 7500 lb. capacity. Machine will need to be assembled on site.

3. The serial numbers provided do not match up to the previous units sold per the manufacturer. Please advise.

Answer:

These are the serial numbers taken directly off the ovens, these are the exact same numbers I sent before. These may not match the most recent units purchased as we purchased three ovens for our renovation project that are located in another part of the facility.

1. 24-1043106

2. 24-1043107

3. 24-1043108

4. 24-1043109

The racks we have are not Baxter racks, they are aftermarket racks slightly modified to fit the oven lifts. At the time the racks were ordered, did not

1. 3 1/2 wheels

2. 70 1/4 inches high to top of channel (ground level to top of channel)

3. 36 inches deep (double rack)

4. 28 1/2 inches wide.