Speed_camera_requirements.pdf

Speed camera requirements

Speed Measurement Device Equipment Consisting of 1 each of the following:

- Main unit Sensor with Digital camera

- Computer – Windows 10

- Control Unit with wireless remote control

- Data Transfer Adapter

- Monitor 22”

- Rechargeable batteries (12V/18Ah)

- Battery charger

- Transport case

- Data Transfer Software

- Evaluation Software with serial interface to OWIG System or external Evaluation Software

- Case review Software speed check

1 each of the Speed camera without evaluation software

3 each of the Rechargeable batteries 12 Volt / 38 Ah

3 each of the Charging unit 12V / 5A

1 each of the Tripod stand Libec TH-6SOHD

Flashing Accessories Consisting of 1 each:

- Photoflash lamp

- Control unit

- Wireless remote control

- Rechargeable battery

- Tripod stand

Must meet Physikalisch-Technische Bundesanstalt (PTB) certification for use in Germany.

EQUIPMENT:

1 each of cable extension 2 meters for flash radio triggering

TRAINING:

1 each of Training class to 7 students on the use of the equipment at Spandahlem Air Base

CAPABILITY:

To retrieve data stored on the camera device and transfer to stand alone computer.

Measurements from the hand, from the tripod and out of the vehicle.

Forgery-proof signature protects against manipulation of images and measurement data.

No attentive measuring operation required.

Short evaluation time. No additional signal conditioning instruments required.

System only saves the information, if the measured speed is greater than the set limit.

Compact measuring head, up to 4m from the computer unit deductible.

Measurement scene as a live image with 15 frames per second