FA5270-17-R-0006_-_Amendment__1_Statement_of_Changes.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to include the dimensions of the items due to safety reasons. The new dimensions of CLIN 0001 is listed by w idth, depth, then height in inches. The dimensions are not to exceed 50"x76"x70". The dimensions of CLIN 0002 are not to exceed 50"x54"x89". The solicitation close date is now 18 May, 12 PM JST (Japan Standard Time).

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-May-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X FA527017R0006

X 9B. DATED (SEE ITEM 11)

02-Mar-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-May-2017

CODE

18 CONS/LGCA

POC: RUSSELL WALTON

UNIT 5199, BLDG 99 KADENA AB

APO AP 96368

FA5270 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

FA527017R0006

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 03-Apr-2017 12:00 AM to 18-May-2017 12:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

WASHER/EXTRACTORIndustrial Type 100 lbs capacity with water conservation technology.Cylinder volume,

15.3 cubic feet (434L).High extraction capability, 200-766 rpm. Extraction G-Force, 300Gs.Control: Programmable Microprocessor.Drive motor, 10 HP (7.45 kw), 7 speeds, inverter.Voltage: 208 Volts 60 Hertz 3 Phase.Mfr: Pellerin Milnor Corporation. Model:36026 V7Z or equal.

To:

WASHER/EXTRACTORIndustrial Type 100 lbs capacity with water conservation technology. Depth must not exceed 76 Inches. Height must not exceed 70 Inches.

Width must not exceed 50 Inches.Cylinder volume, 15.3 cubic feet (434L).High extraction capability, 200-766 rpm.

Extraction G-Force, 300Gs.Control: Programmable Microprocessor.Drive motor, 10 HP (7.45 kw), 7 speeds, inverter.Voltage: 208 Volts 60 Hertz 3 Phase.Mfr: Pellerin Milnor Corporation. Model:36026 V7Z or equal.

CLIN 0002

The CLIN extended description has changed from:

DRYER/TUMBLERSteam Heated Industrial Type120 lbs capacity.Programmable Microprocessor control.Basket Drive Motor-1 HP.Airflow-cfm (cmm) 2,800 (79.2).Heat input-btu/hr (kcal-hr)415,000 (104,580).Voltage: 208 Volts 60 Hertz 3 Phase.Mfr: Pellerin Milnor Corporation. Model: M122 or equal.

To:

DRYER/TUMBLERSteam Heated Industrial Type120 lbs capacity. Width must not exceed 50 Inches. Depth must not exceed 54 Inches.

Height must not exceed 89 Inches.Programmable Microprocessor control.Basket Drive Motor-1 HP.Airflow-cfm (cmm) 2,800 (79.2).Heat input-btu/hr (kcal-hr)415,000 (104,580).Voltage: 208 Volts 60 Hertz 3 Phase.Mfr: Pellerin Milnor Corporation. Model: M122 or equal.

(End of Summary of Changes)