Attachment_1-Salient_Characteristics_Shelving_Unit.pdf

Rolling Storage Unit (or Equal)

Shelving 10’ High by 490 ¼” 10 section shelving (Shelving to be 42 ¾” wide)

Picture below: Or Equal Item Acceptable- Please provide images and dimentions information.

FOUR POST SHELVING - UP TO 30"W X 15" D x 76" H Extended Description:

4Post Shelving Base Unit, 30"W X 15" D x 76" H, Supports Plain & Heavy-Duty Shelves, Single-Face, Heavy Duty, Shelf Reinforcements, Upright, Closed Tee, & Bin Front. Powder Coat Paint Finish.

FOUR POST SHELVING - +1 WIDTH INCREASE

Extended Description:

4Post Shelving +1 Width Increase, Supports Plain & Heavy-Duty Shelves, Single-Face, Heavy Duty, Shelf Reinforcements, Upright, Closed Tee, & Bin Front. Powder Coat Paint Finish.

FOUR POST SHELVING - +1 DEPTH INCREASE

Extended Description:

4Post Shelving +1 Depth Increase, Supports Plain & Heavy-Duty Shelves, Single-Face, Heavy Duty, Shelf Reinforcements, Upright, Closed Tee, & Bin Front. Powder Coat Paint Finish.

FOUR POST SHELVING - +1 HEIGHT INCREASE

Extended Description:

4Post Shelving +1 Height Increase, Supports Plain & Heavy-Duty Shelves, Single-Face, Heavy Duty, Shelf Reinforcements, Upright, Closed Tee, & Bin Front. Powder Coat Paint Finish.

FOUR POST SHELVING - INDIVIDUAL SHELF

Extended Description:

4Post Shelving Shelf, 12 Gauge Steel, Slotted. Powder Coat Paint Finish.

FOUR POST SHELVING - BACK PANEL

Extended Description:

4Post Shelving Back Panel, 14 Gauge Steel. Powder Coat Paint Finish.

MECHANICAL ASSIST SUB FLR

Extended Description:

L Rail Floor, 1 Square Foot X ¾” Thickness (19MM), 5-Ply Underlayment Grade Plywood

MECHANICAL ASSIST ADDER

Extended Description:

Mechanical Assist Carriage System, Adder Unit, Welded Steel Construction, Movable and anchored to rails, 5” Diameter drive wheels, Solid Steel synchronized drive shaft, 3,200 lbs Capacity

MECHANICAL ASSIST STARTER

Mechanical Assist Carriage System, Starter Unit, Triple arm operating wheel with rotating hand knobs, High pressure laminate vertical face plate, Welded Steel Construction, Movable and anchored to rails, 5” Diameter drive wheels, Solid Steel synchronized drive shaft, 3,200 lbs Capacity

MECHANICAL ASSIST RAILS

Extended Description:

ASTM/AISI Type 1035 Steel Rail, 12” L x 5/8” W, supports 1,000 lbs per linear foot. Includes 8,000 PSI non-shrink, non-staining hydraulic cement compound (grout).

MECHANICAL STATION ADDER

Extended Description:

Mechanical Assist Stationary Adder, Adder Unit, Fixed Carriage, Welded Steel Construction, 3,200 lbs Capacity. Supports 4Post or Widespan Shelving Types.

MECHANICAL STATION STARTER

Extended Description:

Mechanical Assist Stationary Starter Unit, Adder Unit, Fixed Carriage, Welded Steel Construction, 3,200 lbs Capacity. Supports 4Post or Widespan Shelving Types.

ACTIVRAC 7M

Extended Description:

ActiveRAC 7 Mechanical Assist Carriage System, Starter Unit, Triple arm operating wheel with rotating hand knobs, Structural steel side panels, Welded Steel Construction, Movable and anchored to rails, 5” Diameter drive wheels, Solid Steel synchronized drive shaft, 7,000 lbs Capacity

ACTIVRAC 7M-ADDER

Extended Description:

ActiveRAC 7 Mechanical Assist Carriage System, Adder Unit, Welded Steel Construction, Movable and anchored to rails, 5” Diameter drive wheels, Solid Steel synchronized drive shaft, 7,000 lbs Capacity

PALLET RACKING - STARTER UP TO 108"W X 42"D x 144"H - 3 TIERS Extended Description:

Hannibal I Series Pallet Rack, 108"W X 42"D x 144"H 3 Tiers, 2 Uprights, 14 Gauge Steel, 3/8 x 5” x 8” Foot Plate, 3 Pin Interchange Connector Standard Drop, Wire Decking W/ Front & Rear Waterfall Edge

PALLET RACKING - ADDER UP TO 108"W X 42"D x 144"H - 3 TIERS Extended Description:

Hannibal I Series Pallet Rack, 108"W X 42"D x 144"H 3 Tiers, 1 Upright, 14 Gauge Steel, 3/8 x 5” x 8” Foot Plate, 3 Pin Interchange Connector Standard Drop, Wire Decking W/ Front & Rear Waterfall Edge

1 each, Mechanical High Density Storage System to Consist of:

-1 Single face fixed carriage 40’ long x 24” wide with full backs -2 Back to back movable carriages 40’ long x 48” wide with full back panels and dual access -1 Single face movable carriage 40’ long x 24” wide with full backs, dual access, and hub locks -Seismic Track, Decking and ramp

Shelving is 113” H with overall height of 120” with track, and carriages. There is a 38” wide aisle.

All shelving units are 6 shelves/5 openings high and have between 18-3/4 and 22-3/4” clearance between shelves. All shelves are adjustable on 1.5” increments.

1,000 pound per foot capacity carriages Movable carriages on barrier free deck. Aisle Locks to protect operators. Easy to move with double gear reduction, 1 LB of effort moving 6,000 LBS.

See Image below: Or Equal Item acceptable.