Attachment_1_-_Laser_Scan_Arm_Specification_Sheet.pdf

Laser Scan Arm Salient Characteristics

Base Requirement

1) IAW

a) Local/AAFB Environmental laws, OSHA and Safety regulations apply.

2) Scan arm must consist of:

a) Must include Scan arm with dimensions of at least 8.2 ft.(2.5m), with 7 Axis

b) Must be High Resolution Scanning

c) Must be capable of full color 3d modeling

d) Must have volumetric accuracy up to 75 microns

e) Must be able to high speed scan up to 600,000 points per second

f) Must have portable capabilities

g) Must support dual hot swappable batteries

h) Must come with Scan arm base plate

i) Must include 1 Year manufacturer warranty

j) Must be within CE Conformance

k) Must include LLP calibration plate

l) Must include Heavy duty case

m) Must include probe kit( universal iProbe base, 6mm and 8mm probes, 30mm and 50mm probes extensions and calibration fixture)

3) Calibration Standards/Capabilities must consist of:

a) 3D Scanner and Arm Must be calibrated in accordance with ISO 10360-8 Annex D.

b) Arm for tactile probing Must be calibrated in accordance with ISO 10360-12

Software Options and Upgrades

1) Must include Design X and Control X Suite:

a) Must include one full year of maintenance

b) Must include one full year of technical support and upgrades

2) Must include Magnetic Mount Kit:

a) Must include (1) 150.0 mm diameter magmount

b) Must include (1) hex wrench

c) Must include test certification

d) Must include operating manual

3) Must include (2) Geomagic dongle