FA520920U0050.pdf

COMBINED SYNOPSIS/SOLICITATION

FA520920U0050

Harris Radios

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR), subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; this is a Request for Quotation (RFQ) and a written solicitation will not be issued.

2. Solicitation number FA520920U0050 is issued as RFQ and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2020-07, DPN 20200702, and AFAC 2019- 1001.

3. The NAICS is 334220, Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing.

4. Contract Line Items:

See attachment 1. Pricing Schedule.

a. Description of Requirement: The contractor shall provide 2 PRC-117G's, 2 PRC-160's, power amplifiers, rack mounts, radio amplifiers, antenna couplers, antennas, rack mounts, cabling and support equipment.

b. Delivery: F.O.B. Destination to:

374th Communications Squadron Unit 5081 Bldg 307 Fussa Shi Yokota Air Base

c. Required Delivery Date/Period of Performance: 60286 days ARO

Primary: TSgt Tracy Scott – tracy.scott.2@us.af.mil

5. Response Date and time: Quotes must be provided on this form and be signed, dated and submitted by 191 Aug 2010, 1600 Japan Standard Time (JST), to both of the points of contact listed below.

6. Quotes must be valid through 30 Sep 2020.

7. It is the quoter’s responsibility to be familiar with all applicable clauses and provisions. All FAR/ DFARS/AFFARS clauses and provisions may be viewed in full text at http://farsite.hill.af.mil/ or https://www.acquisition.gov/browse/index/far. The following clauses and provisions apply to this acquisition:

8. Currency rate will be used $1.00= ¥111.1542

CLAUSES INCORPORATED BY REFERENCE

FAR Clauses:

52.203-3 Gratuities Apr 1984 52.204-7 System For Award Management Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance Jul 2016

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

Aug 2019

52.211-6 Brand Name or Equal Aug 1999 52.212-4 Contract Terms and Conditions – Commercial Items Oct 2018 52.225-14 Inconsistency Between English Version and Translation of Contract Feb 2000 52.228-3 Worker's Compensation Insurance (Defense Base Act) Jul 2014 52.232-37 Multiple Payment Arrangements May 1999 52.232-40 Providing Accelerated Payments to Small Business Subcontractors Dec 2013

DFARS Clauses:

252.203-7000 Requirements Relating to Compensation of Former DoD Officials Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights Sep 2013 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Information Oct 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting Dec 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support May 2016

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism

May 2019

252.222-7002 Compliance With Local Labor Laws (Overseas) Jun 1997 252.225-7012 Preference for Certain Domestic Commodities Dec 2017 252.225-7041 Correspondence in English Jun 1997 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports Dec 2018 252.232-7010 Levies on Contract Payments Dec 2006 252.243-7002 Request for Equitable Adjustment Dec 2012 252.244-7000 Subcontracts for Commercial Items Jun 2013 252.247-7023 Transportation of Supplies by Sea Feb 2019

CLAUSES IN FULL-TEXT

Addendum to FAR 52.212-4 Contract Terms and Conditions – Commercial Items (Oct 2018).

Paras (k) and (w) are only for Japan vendors

(k) Taxes. The text is deleted and replaced as follows:

(1) Unless otherwise provided in this contract, the contract price includes all applicable taxes and duties, except taxes and duties that the Government of the United States and the Government of Japan have agreed shall not be applicable to expenditures in Japan by or on behalf of the United States.

(2) The Status of Forces Agreement between the Japan and the United States and implementing the Japanese laws authorizes the United States exemption from certain Japanese taxes for materials, supplies, equipment and services procured for official purpose in Japan by the United States Armed Forces or by authorized agencies of the United States Armed Forces. Those taxes include (1) Consumption tax, (2) Gasoline tax and local road tax on gasoline, (3) Diesel oil tax, and (4) Liquefied petroleum gas tax.

(3) The Contractor will submit requests for gasoline or diesel oil tax exemption certificate to the Contracting Officer. This request will show the actual amount of gasoline or diesel oil used exclusively for the performance of this contract, with documentary evidence and detailed item breakdown to support the accurate consumption of gasoline or diesel oil, or other necessary information and data as may be required. The Contracting Officer will issue to the Contractor a tax exemption certificate for the actual amount of gasoline or diesel oil used exclusively for the performance of this contract.

(w) Conciliation. Except as otherwise provided in this contract, any disagreement arising under this contract which is not resolved by the parties to this contract may be submitted to the United States - Japan Joint Committee for conciliation in accordance with Paragraph 10, Article XVIII of the Status of Forces Agreement under Article VI of the Treaty of Mutual Cooperation and Security between Japan and the United States of America. Requests by the Contractor shall be made in accordance with the following procedures:

(1) In the event the Contractor desires conciliation after the decision of the Contracting Officer has been served upon him, he will first file his appeal from such findings of fact with the appropriate authority in accordance with the clause of this contract entitled, “Disputes” and within the time limits described therein before filing a request for conciliation with the Joint Committee and then request the appellate authority under the “Disputes” clause to suspend its action on his appeal until such time as the Joint Committee has had an opportunity for effecting conciliation.

(2) The request for conciliation will be submitted by the Contractor through the nearest Defense Facilities Administration Bureau, to the Contract Conciliation Panel of the Joint Committee. Upon the filing of the request with the Joint Committee, the Contractor will immediately notify the Contracting Officer in writing that the request for conciliation has been filed.

(3) In the event the disagreement submitted to the Joint Committee under subparagraph (2) above has been resolved through conciliation, it will be the responsibility of the Contractor to notify the appellate authority designated in the clause of this contract entitled, “Disputes”, of the settlement of the dispute and to withdraw his appeal.

(4) In the event the Contractor has submitted a request for conciliation to the Joint Committee under subparagraph (2) above desires, notwithstanding tendency of his request for conciliation, that action by the appropriate authority under the clause of this contract entitled, “Disputes”, be resumed on his appeal, it is his responsibility to so request the said authority in writing. The Joint Committee shall be immediately informed by the Contractor of his action taken hereunder.

(5) No request for conciliation can be submitted to the Joint Committee in the case of a dispute upon which the final decision of the appropriate authority under the clause of this contract entitled, “Disputes”, has been rendered. Pending the hearing of the conciliation panel, the Contractor shall proceed diligently with the performance of the contract in accordance with the Contracting Officer’s decision. The provisions of this clause shall not prejudice any right which the parties to the contract may have to file in a civil suit.

Para (x) is only for US vendors when performance is in Japan

(x) Status of Forces Agreement (SOFA). The text is added as follows:

(1) Contract to be Performed in Japan. The Status of Forces Agreement between the United States and Japan (SOFA) governs the rights and obligations of the United States armed forces in Japan. Unless a contractor is present in Japan solely to perform under a contract with the United States for the sole benefit of the United States armed forces in Japan and is accorded privileges under SOFA Article XIV, it and its employees shall be subject to all the laws and regulations of Japan. Certain contractor employees and their dependents not accorded privileges under SOFA Article XIV may be accorded privileges under SOFA Article I(b).

(2) The Contractor shall comply with the instruction of the Contracting Officer concerning the entry of its employees, equipment, and supplies into Japan, and shall comply with all applicable Japanese laws and regulations as well as United States Forces Japan (USFJ) and USFJ component policies and regulations during the performance of this contract.

(3) SOFA Article I(b) Status

(A) SOFA Article I(b) status. Contractor employees performing under contracts with the United States for the provision of services in support of U.S. armed forces in Japan, and whose presence is required in Japan to provide such services, may be determined eligible to acquire SOFA status in Japan as part of the civilian component under Article I(b) of the SOFA. Article I(b) does not create a lawful status in Japan for any entity other than individuals (e.g., the company employing the individual does not acquire SOFA status under Article I(b)). To qualify for SOFA status under SOFA Article I(b), such individuals must be:

(i) United States nationals,

(ii) not ordinarily resident in Japan,

(iii) present in Japan at the invitation of, and solely for the purpose of executing contracts with, the United States for the benefit of the United States armed forces, and (iv) not contractors or employees of a contractor whose presence in Japan is solely for the purpose of executing contracts within the definition of SOFA Article XIV.

(B) The contracting officer may determine a proposed contractor employee’s eligibility for recognition as a Member of the Civilian Component under Article I(b) of the SOFA by documenting on a Letter of Authorization (LOA) that the contractor employee is essential to the mission of the United States armed forces and has a high degree of skill of knowledge for the accomplishment of mission requirements by fulfilling one of the following:

(i) Acquiring the skill and knowledge through a process of higher education or specialized training and experience; or

(ii) Possessing a security clearance recognized by the United States to perform his or her duties;

or

(iii) Possessing a license or certification issued by a U.S. Federal Department or Agency, U.S.

State, U.S. Territory, or the District of Columbia to perform his or her duties; or

(iv) Identified by the United States armed forces as necessary in an emergent situation and will remain in Japan for less than 91 days to fulfill specialized duties; or

(v) Specifically authorized by the Joint Committee.

(C) Contractor employees shall present a valid LOA, signed by the Contracting Officer, to Japanese immigration officials upon entry into Japan to receive GOJ recognition as a Member of the Civilian Component under Article I(b) of the SOFA.

(D) SOFA Article 1(b) privileges and benefits. Persons granted authority to enter Japan under SOFA Article I(b) and their dependents (defined as spouse, children under 21, and, if dependent for over half their support upon an individual having SOFA Article I(b) status, parents and children over 21) may be accorded the following benefits of the SOFA. These privileges are personal to the employee/dependent and to not inure to the employer.

(i) Access to and movement between facilities and areas in use by the United States armed forces and between such facilities and areas and the ports or airports of Japan as provided for in SOFA Article V, paragraph 2;

(ii) Entry into Japan and exemption from Japanese laws and regulations on the registration and control of aliens as provided for in SOFA Article IX;

(iii) Acceptance as valid by Japan, without a driving test or fee, a U.S. Forces, Japan Operator’s Permit for Civilian Vehicle as provided for in SOFA Article X. Issuance of such permit shall be subject to applicable military regulation;

(iv) Exemption from customs duties and other such charges on materials, supplies, and equipment which are to be incorporated into articles or facilities used by the United States armed forces furniture, household goods for private use imported by person when they first arrive to work in Japan, vehicles and parts imported for private use, and reasonable quantities of clothing and household goods for everyday private use which are mailed into Japan through United States military post offices as provided for in SOFA Article XI, paragraphs 2 and 3;

(v) Exemption from the laws and regulations of Japan with respect to terms and conditions of employment as provided for in SOFA Article XII, paragraph 7, except that such exemption shall not apply to the employment of local nationals in Japan;

(vi) Exemption from Japanese taxes to the Government of Japan or to any other taxing agency in Japan on income received as a result of their service with the United States armed forces as provided for in SOFA Article XIII. The provisions of Article XIII do not exempt such persons from payment of Japanese taxes on income derived from Japanese sources;

(vii) If authorized by the installation commander or designee, the right to use exchanges, commissaries, messes, social clubs, theaters, newspapers and other non-appropriated fund organizations regulated by United States military authorities as provided for in SOFA Article XV;

(viii) The transmission into or outside of Japan of United States dollar or dollar instruments realized as a result of contract performance as provided for in SOFA Article XIX, paragraph 2;

(ix) The use of postal facilities as provided for in SOFA Article XXI;

(x) Exemption from taxation in Japan on the holding, use transfer by death, or transfer to person or agencies entitled to tax exemption under the SOFA, of movable property, tangible or intangible, the presence of which in Japan is due solely to the temporary presence of these persons in Japan, provided such exemption shall not apply to property held for the purpose of investment or the conduct of other business in Japan or to any intangible property registered in Japan.

(xi) Japan authorities have the right to exercise jurisdiction over SOFA personnel in relation to offenses committed in Japan and punishable by the law of Japan. In those cases in which the Japanese authorities have the primary right to exercise jurisdiction but decide not to do so, the United States shall have the right to exercise such jurisdiction as is conferred on it by the law of the United States.

(xii) Logistic Support. Contractor, contractor personnel, and in the case of personnel granted SOFA Article I(b) status, dependents, shall, subject to availability as determined by the installation commander or designee, be provided logistic support including, but not limited to, the items below.

(1) Base Exchange, including exchange service stations, theaters, and commissary (Article I.b. personnel/dependents and Article XIV personnel only);

(2) Laundry and dry cleaning;

(3) Military banking facilities (Article I(b) personnel/dependents and Article XIV personnel only);

(4) Transient billeting facilities;

(5) Open mess (club) membership, as determined by each respective club;

(6) Casualty assistance (mortuary services) on a reimbursable basis;

(7) Routine medical care on a reimbursable basis for U.S. citizens and emergency medical care on a reimbursable basis for non-U.S. citizens;

(8) Dental care, limited to relief of emergencies on a reimbursable basis;

(9) Department of Defense Dependent Schools on a space-available and tuition-paying basis;

(10) Postal support, as authorized by military postal regulations;

(11) Local recreation services on a space-available basis;

(12) Issuance of U.S. Forces, Japan Operator’s Permit;

(13) Issuance of vehicle license plates.

(4) Conduct. Civilian personnel supporting the U.S. armed forces in Japan are guests in a foreign country and must at all times conduct themselves in an honorable and credible manner. Criminal conduct and dishonorable personal behavior committed either on or off duty adversely impacts U. S. and Japanese relations, tarnishes the image of the DoD and USFJ, and hampers the Force’s military readiness.

(A) Compliance with laws and regulations. The Contractor shall comply with, and shall ensure that its personnel are familiar with, and comply with, all applicable—

(i) United States, host country, and third country national laws;

(ii) Treaties and international agreements;

(iii) United States regulations, United States Armed Forces directives, instructions, policies, and procedures; and

(iv) Orders, directives, and instructions issued by supported commanders, including those relating to force protection, security, health, safety, liberty policies, alcohol-related incidents, or relations and interaction with local nationals, should serve as guideposts in all on and off duty conduct and will be used as general principles in the application of the government’s discretion with regard to paragraph (B), below.

(B) Removal and replacement of Contractor personnel. The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor personnel who fail to comply with or violate applicable requirements of this contract, including those stipulated in this section. Such action may be taken at the Government’s discretion without prejudice to its rights under any other provision of this contract, including the termination for default or cause.

(5) Contractors shall comply with the policies and procedures described in DFARS 225.370, DFARS PGI 225.370(c)(i), USFJI 64-100, "Contract Performance in Japan," and USFJI 36- 2811, "Indoctrination Training Programs."

(End of Clause)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Status or Executive Orders

– Commercial Items (Jul 2020).

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108- 78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

(4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(8) 52.209-6, Protecting the Government’ Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

(25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

(26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

(27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(28) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212)

(30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793)

(31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212)

(32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

(33) (i) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O.

13627).

(42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011).

(48) 52.225-5, Trade Agreements (Aug 2018) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

(49) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(55) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Oct 2018)

(56) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Jan 2019) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or

Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2019) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec

2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and

E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to

Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xviii) 52.222-62, Paid sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States

(Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46

U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

52.232-18 Availability of Funds (Apr 1984)

Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.

(End of clause)

252.211-7003 Item Unique Identification and Valuation.

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause— Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government s unit acquisition cost means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor s estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description (If items are identified in the Schedule, insert See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions (Dec 2018).

(a) Definitions. As used in this clause--

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

2-in-1

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Fast Pay requests are only permitted when FAR 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F87700 Issue By DoDAAC FA5209 Admin DoDAAC FA5209 Ship To Code F4G3D5 Service Approver (DoDAAC) F4G3D5 Service Acceptor (DoDAAC) F4G3D5

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. Contracting POC: justin.williams.18@us.af.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

AFFARS 5352.201-9101 Ombudsman (Jun 2016).

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman.

AFICC/KH (Chief Enlisted Manager) 25 E Street, Suite B-100

JBPH-H, HI 96853-5427

Phone: (808) 449-8569

FAX: (808) 449-8571

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer..

PROVISIONS INCORPORATED BY REFERENCE

FAR Provisions:

52.204-16 Commercial and Government Entity Code Reporting Jul 2016 52.212-1 Instructions to Offerors—Commercial Items Jun 2020

DFARS Provisions:

252.203-7005 Representation Relating to Compensation of Former DoD Officials Nov 2011 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls Oct 2016 252.215-7007 Notice of Intent to Resolicit Jun 2012 252.215-7008 Only One Offer Oct 2013 252.225-7031 Secondary Arab Boycott of Israel Jun 2005

252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism

Dec 2018

PROVISIONS IN FULL-TEXT

Addendum to 52.212-1 Instructions to Offerors – Commercial Items (Jun 2020).

*If offerors fail to submit the followings, offerors are considered as non-responsive and ineligible for contract award.

(i) Offerors shall complete Attachment 1, Pricing Schedule (Including Terms & Conditions, Shipping and Company's Information.)

(ii) Offerors shall complete the registration to have their own access for System for Award Management (https://www.sam.gov/portal/SAM/).

(iii) Quotations must be valid through 30 September 2020.

(iv) Quotations shall contain following items:

(a) Attachment 1, Price Schedule

(b) Attachment 2, Technical Product Information

(c) Attachment 3, FAR 52.212-3 (Jun 2020) Alt I (Oct 2014) (except SAM Registered Vendor)

Addenda to the following paragraphs of 52.212-1 are:

(a) All quotes are due on or before 16:00 PM Japan Standard Time (JST), 19 Aug 2020. Electronic quotes are highly encouraged. Submission may be made via email to justin.williams.18@us.af.mil and loren.farnam.3@us.af.mil. Hand carried or mailed proposals must be addressed to the address below (see part b of this addenda for additional information on paper submissions). Quotes must reference the solicitation number. It is the responsibility of the contractor to confirm receipt of quote by the Government.

374th Contracting Squadron/Airlift Wing Acquisition Flight (374 CONS/PKBB) Attn: TSgt Justin Williams, Contract Specialist Bldg. 620, Yokota Air Base Fussa-shi, Tokyo 197-0001 Japan

(b) For paper/hand carried submissions, the sealed envelope or package used to submit your proposal must show the time and date specified for receipt, the solicitation number, and the name and address of the offeror.