Stratasys_Fortus_450mc_Specs.pdf

Stratasys FORTUS 450MC GEN II SYSTEM 3D Printer

1. Fused Deposition Modeling Technology

2. Build Envelope (XYZ): 450mc: 406 x 355 x 406 mm (16 x 14 x 16 in.)

3. Material Delivery: Two bays each for material and support canisters, with Auto changeover between canisters

4. System Size and Weight: 129.5 cm x 90.2 cm x 198.4 cm (51 x 35.5 x 78.1 in.) 601 kg

(1325 lbs.)

5. Achievable Accuracy: Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ±

.0015 mm/mm (± .0015 in/in), whichever is greater). Z part accuracy includes an additional tolerance of -0.000/+slice height. Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield

6. Layer Thickness: Materials

0.330 mm (0.013 in): ABS-M30, ABS-M30i, Antero 800NA, ASA, FDM Nylon 12, PC (all types), ULTEM™ resin (all types, 450mc only), ST-130 (450mc only)

0.254 mm (0.010 in): ABS (all types), ASA, FDM Nylon 12, PC (all types), ULTEM™ resin (all types)

0.178 mm (0.007 in): ABS-ESD7, ABS-M30i, ASA, FDM Nylon 12, PC (all types)

0.127 mm (0.005 in): ABS-M30, ABS-M30i, ASA, PC (all types)

7. Network Communication: 10/100 base T connection. Ethernet protocol. RJ45 connector

8. Operator Attendance: Limited attendance for job start and stop required

9. Power Requirements: 208VAC 3 phase, 50/60 Hz, consumes 18 Amps

10. Regulatory Compliance: CE

11. Software: Stratasys Insight v11.x

12. Touchscreen Graphical User Interface

13. Noise emission (acoustic):

<65dBA when idle <66dBA when building

14. On-Site installation and operator training