Boat_Trailer_Specifications.pdf

Trailer must be built to accommodate a 30' long 10' wide Munson PAC CAT tri hull boat with two 250 H.P. Yamaha outboard motors GVRW must not be any lower that 15,600 lbs.

5th Wheel, Hot Dipped Galvanized Steel Triple Axle Boat Trailer Trailer Includes:

-Hot Dipped Galvanized Welded Steel Channel Frame -Fully welded Uni-frame design with welded cross members and completely adjustable bunk supports, delivering industry leading strength and durability.

-Self-Centering Double Bunk Hull Support System -Fully adjustable, inner and outer bunks. Heavy duty marine carpet. Laminated Kiln Dried Douglas Fir bunks.

-Rubber Bow Stop Roller -For additional hull support and positive retrieval stop. The most effective design for protecting and positioning boats onto trailers.

-Tie Down Eyes - Two at the tail of the trailer, for securing boat to trailer during road transportation.

-Winch Stand Custom Built Trailer for each boat for proper height and clearance not to exceed height of 13’6” high boat on trailer.

-Low energy storing 3” strap on 2-speed 3,700 lb. winch. Not a one size fits all winch stand.

-Walk on Fenders -Hot Dipped Diamond Plate fender.

-Triple 5,200 Torsion Axles with 6-Lug Hubs -Progressive spring rate for smoother ride. Less maintenance than leaf springs. Galvanized. 5 year warranty.

-Vault Sealed Bearing System 5 Year Unlimited Mileage Warranty -“Air-Tight” Pressurized Protectors -Positive pressure hubs, stainless steel wear band and “Viton” seal. Preventing water intrusion and bearing failures from water contaminated grease.

-Hydraulic Surge Brake Actuator -Disc Brakes on all 3 axles - 12” rotors, Aluminum calipers with stainless steel pistons, stainless steel bushing and guide bolts. Designed for marine use. Self- adjusting, low maintenance, 5 year limited warranty.

-Brake Lines - DOT and SAE approved with 1/8-inch hydraulic brake hose assemblies consisting of black polymeric outer cover, white nylon braid layer and white polymeric inner tube.

-Tires - LT235/80R16 tires, Load Range E, 3,520lb capacity each. Aluminum Wheels, 6-Lug -Powder coated for superior corrosion protection and air pressure retention -Tongue Jack, Heavy Duty 10,000lb Capacity Drop Leg -Higher vertical lifting range and durable heavy duty long lasting machined gears. Side Wind.

Wiring System -Heat Shrink butt connectors with active sealant. To prevent corrosion and electrical wiring failure, common with other connectors.

-LED (light emitting diode) Lighting -Electrical Plug, 7-Blade RV to match all major, light and medium truck manufactures electric receptacles.

2 Year Structural Warranty