FA462019QA402.pdf

FA462019QA402

COMBINED SYNOPSIS/SOLICITATION

92d Aircraft Maintenance Squadron High Lift

FA462019QA402

FAIRCHILD AFB

July 23, 2019

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

2. This solicitation is being issues as a(n) Request For Quotation (RFQ).

3. This solicitation document and incorporated provisions and clauses are those in effect through:

a. Federal Acquisition Circular FAC 2019-03

b. Defense Federal Acquisition Circular DPN 20190531

c. Air Force Federal Acquisition Circular AFAC 2018-0525

4. This acquisition is reserved exclusively for small business concerns and shall be set aside in accordance with FAR 13.003(b)(1) under the NAICS code 333923, with a small business size standard of 1,250 employees. All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov. Lack of SAM registration will make an offeror ineligible for award. The Unit Small Business Specialist is Mr. Michael Gilbert (michael.gilbert.3@us.af.mil).

5. Pursuant to FAR 52.232-18, Availability of Funds, funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.

The government request quotes for the following items;

Supplies/Services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

Delivery Information: FOB Destination to Fairchild AFB WA, 99011. Shipping FOB destination must be included in the offered price

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC

Performance MUST be accomplished within 60 days from date of award.

1 Fairchild AFB - 92 MXG F1X2MT

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its

Line Item Item Description Specifications/Standards Qty Unit of Measure Unit Price ($) Extended Price ($)

0001 High Lift

The contractor shall provide a high lift as per the attached list of salient characteristics (Attachment 1).

1 Each

FA462019QA400

quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):

http://farsite.hill.af.mil/ https://www.acquisition.gov

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es):

http://farsite.hill.af.mil/ https://www.acquisition.gov

(End of clause)

CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE

52.204-7 System for Award Management. 2018-10 SEC L 52.204-16 Commercial and Government Entity Code Reporting. 2016-07 SEC K 52.204-18 Commercial and Government Entity Code Maintenance. 2016-07 SEC I 52.204-21 Basic Safeguarding of Covered Contractor Information Systems. 2016-06 SEC I 52.204-22 Alternative Line Item Proposal. 2017-01 SEC I 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a

Felony Conviction under any Federal Law.

2016-02 SEC I

52.212-1 Instructions to Offerors-Commercial Items 2018-10 52.212-3 Offeror Representations and Certifications-Commercial Items 2018-10 52.212-4 Contract Terms and Conditions – Commercial Items 2018-10 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 2018-10 SEC I 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 SEC I 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09 SEC I 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09 SEC I 252.203-7005 Representation Relating to Compensation of Former DoD Officials. As prescribed in 203.171-4(b), insert the following provision:

2011-11 SEC K

252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 2016-05 SEC I 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk

System in Past Performance Evaluations.

2018-03 SEC I

252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors. 2018-01 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2017-12 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2017-12 SEC I 252.225-7048 Export-Controlled Items. 2013-06 SEC I 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12 SEC G 252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12 SEC G 252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.243-7001 Pricing of Contract Modifications. 1991-12 SEC I 252.244-7000 Subcontracts for Commercial Items 2013-06 SEC I 252.247-7023 Transportation of Supplies by Sea. 2019-02 SEC I 5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODSs) 2003-04

CLAUSES INCORPORATED BY FULL TEXT

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JAN 2017) -- ADDENDUM

FAR 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition. As prescribed in FAR 12.301(b)(1), the following addendum is provided for this solicitation and hereby amends any language therein:

1. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Quotations in response to this Combined Synopsis/Solicitation must address the evaluation factors which include price and technical specification as defined herein.

2. Quote Specifics: All quotes must be provided on the solicitation on page 1 and the quote sheet (Attachment 2).

The quote sheet must be filled out in its entirety to include FAR 52.212-3(b). Questions and quotations must be sent via email to the points of contact listed on page 1 by the specific submission deadline.

a. Question Submission Deadline: No later than Thursday, August 1, 2019 at 2:00 PM PST.

b. Quote Submission Deadline: No later than Thursday August 8, 2019 at 2:00 PM PST.

(End of provision)

52.212-2 Evaluation-Commercial Items. (OCT 2014)

As prescribed in 12.301(c), the Contracting Officer may insert a provision substantially as follows:

Evaluation-Commercial Items (Oct 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price Past Performance

[Contracting Officer shall insert the significant evaluation factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.] Technical and past performance, when combined, are __N/A__ [Contracting Officer state, in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.]

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-

Commercial Items.

(MAY 2019)

As prescribed in 12.301(b)(4), insert the following clause:

Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (May2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (Aug 1996) (31U.S.C.3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78

(19U.S.C.3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] ____ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995)

(41U.S.C.4704 and 10U.S.C.2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41U.S.C.3509)).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L.

109-282) (31U.S.C.6101note).

____ (5) [Reserved].

____ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

____ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

__X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31U.S.C.6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018)

(41U.S.C. 2313).

____ (10) [Reserved].

____ (11)

(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15U.S.C.657a).

(ii) Alternate I (Nov 2011) of 52.219-3.

____ (12)

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15U.S.C.657a).

____ (ii) Alternate I (Jan 2011) of 52.219-4.

____ (13) [Reserved] __X__ (14)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15U.S.C.644).

(ii) Alternate I (Nov 2011).

____ (iii) Alternate II (Nov 2011).

____ (15)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15U.S.C.644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Oct2018) (15U.S.C.637(d)(2) and (3)).

____ (17)

(i) 52.219-9, Small Business Subcontracting Plan (Aug2018) (15U.S.C.637(d)(4)) ____ (ii) Alternate I (Jan 2017) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9

____ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15U.S.C.644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15U.S.C.637(a)(14)).

____ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15U.S.C.637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15U.S.C.657f).

__X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15U.S.C.632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Dec 2015) (15U.S.C.637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec2015) (15U.S.C.637(m)).

__X__ (25) 52.222-3, Convict Labor (June 2003) (E.O.11755).

__X__ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2018) (E.O.13126).

__X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

____ (28)

(i) 52.222-26, Equal Opportunity (Sept 2016) (E.O.11246).

(ii) Alternate I (Feb 1999) of 52.222-26.

(29)

(i) 52.222-35, Equal Opportunity for Veterans (Oct2015) (38U.S.C.4212).

(ii) Alternate I (July 2014) of 52.222-35.

(30)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29U.S.C.793).

(ii) Alternate I (July 2014) of 52.222-36.

____ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38U.S.C.4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

__X__ (33)

(i) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22U.S.C.chapter78 and E.O. 13627).

____ (ii) Alternate I (Mar 2015) of 52.222-50 (22U.S.C.chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____(35)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008)

(42U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____(ii) Alternate I (May 2008) of 52.223-9 (42U.S.C.6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____(36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun

2016) (E.O. 13693).

____(37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(Jun2016) (E.O. 13693).

____ (38)

(i) 52.223-13, Acquisition of EPEAT?-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Oct 2015) of 52.223-13.

____ (39)

(i) 52.223-14, Acquisition of EPEAT?-Registered Televisions (Jun2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun2014) of 52.223-14.

(40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42U.S.C.8259b).

____ (41)

(i) 52.223-16, Acquisition of EPEAT?-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and

13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

__X__ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

____ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

(44) 52.223-21, Foams (Jun2016) (E.O. 13693).

____ (45)

(i) 52.224-3 Privacy Training (Jan2017) (5 U.S.C. 552 a).

____ (ii) Alternate I (Jan 2017) of 52.224-3.

____ (46) 52.225-1, Buy American-Supplies (May 2014) (41U.S.C.chapter83).

____ (47)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014)

(41U.S.C.chapter83,19U.S.C.3301 note, 19U.S.C.2112 note, 19U.S.C.3805 note, 19U.S.C.4001 note, Pub. L. 103- 182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

(iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (Aug 2018) (19U.S.C.2501, et seq., 19U.S.C.3301 note).

__X__ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42U.S.C.5150).

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007)

(42U.S.C.5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41U.S.C.4505, 10U.S.C.2307(f)).

____ (54) 52.232-30, Installment Payments for Commercial Items (Jan2017) (41U.S.C.4505, 10U.S.C.2307(f)).

__X__ (55) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018)

(31U.S.C.3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013)

(31 U.S.C.3332).

____ (57) 52.232-36, Payment by Third Party (May 2014) (31U.S.C.3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5U.S.C.552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15U.S.C.637(d)(13)).

____ (60)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46U.S.C.Appx.1241(b) and 10U.S.C.2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] ____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495).

____ (2) 52.222-41, Service Contract Labor Standards (Aug 2018) (41U.S.C.chapter 67).

____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29U.S.C.206 and

41U.S.C.chapter 67).

____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple

Year and Option Contracts) (Aug 2014) (29U.S.C.206 and 41U.S.C.chapter 67).

____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014)

(29U.S.C.206 and 41U.S.C.chapter67).

____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41U.S.C.chapter67).

____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services-Requirements (May 2014) (41U.S.C.chapter67).

____ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42U.S.C.1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41U.S.C.3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15U.S.C.637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (May2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sept 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38U.S.C.4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul2014) (29U.S.C.793).

(x) 52.222-37, Employment Reports on Veterans (Feb2016) (38U.S.C.4212)

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug2018) (41U.S.C.chapter 67).

(xiii)

(A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22U.S.C.chapter78 and E.O 13627).

(B) Alternate I (Mar2015) of 52.222-50(22U.S.C.chapter78 and E.O 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May2014) (41U.S.C.chapter67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services-Requirements (May2014) (41U.S.C.chapter67).

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix)

(A) 52.224-3, Privacy Training (Jan 2017) (5U.S.C.552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section

862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42U.S.C.1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46U.S.C.

Appx.1241(b) and 10U.S.C.2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

252.211-7003 Item Unique Identification and Valuation. (MAR 2016)

As prescribed in 211.274-6(a)(1), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier;

the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Governments unit acquisition cost means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Governments unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Governments unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description (If items are identified in the Schedule, insert See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology International symbology specification Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with

ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall

(A) Determine whether to

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier

Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of Clause)

5352.201-9101 OMBUDSMAN (APRIL 2014)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsmen, Mrs.

Susan Madison, AFICA OL AMC, 507 Symington Drive, Scott AFB, IL 62225-5022, 618-229-0267, fax 618-256- 6668, email: susan.madison@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman levels, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

End of Clause

Attachments:

1. Salient Characteristics

2. Quotation Sheet

SALIENT CHARACTERISTICS FOR HIGH LIFT FOR 92 AMXS

Aircraft Maintenance squadron personnel will use this High lift to access the following out of reach areas.

Communications and Navigation will need the High lift to access the HF Long wire, HF #1 Coupler, Lightening Arrestor, HF Probe, VOR/ILS Antenna’s, VOR/ILS Splitter, and SATCOM Antenna. IFCS will require the High lift to access the Rudder PCU. Electrical and Environmental will need the High lift to access the A/R Floodlight on the top of the tail, the strobe light on top of the aircraft and for the tail navigation lights. The acquisition of this High lift will greatly improve maintenance response and repair times and allow us to reach areas of the aircraft that we are unable to access at this time.

The high lift shall have the following salient characteristics:

• High lift shall provide an Articulating Boom Lift

• High lift must have a minimum platform height of 61 feet

• High lift must be safe to use in winds up to 28 mph or in accordance with manufacturer recommendations.

• High lift must have a minimum platform rotation between 160 and 180 degrees

• High lift must have a minimum vertical jib rotation between 130 and 150 degrees

• High lift must have a turntable rotation of 360 degrees continuous

• High lift must have a minimum lift capacity of 500 pounds

• High lift shall have 4-wheel drive capability

• High lift must have an hour meter, low fuel level indicator and engine pre-heater with light indicator

• High lift must have a cold weather package to include o Freeze plug heater o Platform control board heater o Platform manifold recirculation

• High lift must have a flashing beacon and travel alarm

• High lift must have a diesel engine

• High lift shall provide a towing package.

• High lift must have AC power to platform

• High lift must have a tilt alarm minimum of 5 degrees

• High lift should not exceed 40 feet in length and 10 feet in width stowed

• High lift must have a minimum of 55W platform lighting for night operation

• High lift must have a minimum ground clearance between 12 and 15 inches

• High lift must have a platform (upper basket) size of 8 feet x 3 feet

• High lift must have both platform (upper basket) and lower controls to maneuver.

• High lift may be any industry or manufacturers standard color

Quotation Sheet (Firm Fixed-Price) Requirement Title:

Solicitation Number:

Solicitation Issue Date:

Response Deadline:

Point(s) of Contact:

92d Aircraft Maintenance Squadron High Lift

FA462019QA402

Tuesday, July 23, 2019

Thursday August 8, 2019 at 2:00 PM PST

Sterling J. Doiron, SSgt, USAF (sterling.doiron@us.af.mil) Zachary P. Slamon, SrA, USAF (zachary.slamon@us.af.mil)

Company Name Address

Point of Contact Position

Phone Number Email

CAGE DUNS Number

Offerors and quoters are required to be registered in SAM at the time an offer or quotation is submitted in order to comply with the annual representations and certifications requirements.

Delivery Date/Period of Performance Start Date Requested

TOTAL OFFERED PRICE

52.212-3 Offeror Representations and Certifications – Commercial Items.

(b)(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-- Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________________.

[Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

The full text of this provision can be found at http://farsite.hill.af.mil/.

Line Item Item Description Specifications/Standards Qty Unit of Measure Unit Price ($) Extended Price ($)

0001 High Lift

The contractor shall provide a high lift in accordance with the attached list of salient characteristics (Attachment 1).

1 Each

Company Information

Quotation Information mailto:sterling.doiron@us.af.mil mailto:zachary.slamon@us.af.mil http://www.sam.gov/