FA441724Q0054 - Q and A (04 Mar 24).pdf

PDF 67 KB Posted

Attached to
MAKO Breathing Air System Federal contract opportunity
Solicitation number
FA441724Q0054
Issued by
Department of the Air Force Special Operations Command

About this file

This document contains questions and answers regarding solicitation number FA441724Q0054 for a MAKO Breathing Air System replacement. The solicitation is for replacing an older breathing air system unit at Building 90540 on the northern backside/outside at an existing compressor room. Power for the new unit will be provided by the Base CE/Electrical Shop. An existing insulated room with floor fans and exhaust fans is available for installation. A forklift will also be available on site for lifting the new equipment.

View the file

Other files for this federal contract opportunity

Other files attached to MAKO Breathing Air System, newest first.
File Type Posted
FA441724Q0054 - Existing Compressor Comp Data (04 Mar 24).pdf PDF
FA441724Q0054 - Exisiting Compressor Photo (04 Mar 24).pdf PDF
RFQ - FA441724Q0054 (Amendment 1 - 01 Mar 24).pdf PDF
RFQ - FA441724Q0054.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MAKO Breathing Air System Q&A

FA441724Q0054

(Answers are highlighted in yellow)

1. What power source do you need? 230V or 440V, 60Hz? (230V).

2. What phase do you need single or three phase? (3 phase).

3. Can you take a picture of where the unit is going to go? (On Northern backside/outside

BLDG. 90540).

4. Can you share a general layout within the room for installation purposes? (Existing compressor room, insulated with floor fan and exhaust fans installed for present use).

5. If power is not already run you will you have to get a contractor to perform this work.

(Power provided by Base CE/Electrical Shop).

6. Is this a new installation or a replacement of an existing unit? (Replacement of an older unit).

7. Do the hoses and the control panel need to be cleaned IAW MIL-STD-1622B? (Already installed, meets MIL-STD instruction.)

8. A Forklift is required for equipment lifting. Would a Forklift be available? (Yes, a Forklift is available in the building next door to us).

File details come from the government source that posted it. Updated .