Attachment_2_PPQ.docx

For Official Use Only When completed, this document is Source Selection Information IAW FAR 2.101 and 3.104.

Past Performance Questionnaire The 1st Special Operations Contractng Squadron at Hurlburt Field, FL is in the process of competitively selecting a source for Credential Services.

One of the considerations in the evaluation is the verification of the offerors' past performance on contracts or other work efforts which reflect the offeror's ability to perform on the proposed effort. We depend on information received from organizations such as yours, which have had first-hand experience with the offeror, for the evaluation of the offeror's performance on those contracts or work efforts.

Our areas of interest regarding the offeror are summarized in the enclosed questionnaire. In order to meet the acquisition milestones, we request your written response no later than 14 August 2017. This schedule will allow us sufficient time to analyze the data.

To assist you in preparing your response and expediting your reply, the questionnaire may be filled out electronically and e-mailed to william.farr@us.af.mil and cecile.bodison@us.af.mil. Please confirm receipt of the questinnaire. For questions, please contact SSgt William Farr at (850) 884-3265 or Cecile Bodison at (850) 884-7692. Your completed questionnaire will become part of the official source selection records.

Your assistance is greatly appreciated and your prompt response will be one of the keys to the successful and timely completion of this Source Selection.

CECILE A. BODISON

CONTRACTING OFFICER

Section 1: Contract Identification

A. Contractor (Company/Division):

B. Contractor Cage Code:

C. Contract Number:

D. Contract Type (e.g., FFP, FPIF, CPIF, CPFF, etc.):

E. Program Title:

F. Program Description:

G. Period of Performance

1. Original Schedule (assuming all options exercised):

Beginning Date _________ through ____________

2. Current Schedule (assuming all options exercised):

Beginning Date _________ through ____________

3. Reason for difference (if applicable):

H. Contract Dollar Value

1. Original maximum contract dollar value (assuming all options exercised): $

2. Current maximum contract dollar value (assuming all options exercised): $

3. Reasons for difference between original and current contract dollar value (if applicable):

I. Description of work performed:

J. Was this a competitively awarded contract? ☐ Yes ☐ No

K. Contractor’s Role: ☐ Prime Contractor ☐ Subcontractor ☐ Key Personnel

Note: If offeror holds or has held other contracts for Credential Services with your agency/organization in the last three (3) years, please complete separate Past Performance Questionnaire forms for those contracts as well.

Section 2: Customer or Agency Identification

A. Customer or agency name:

B. Customer or agency description (if applicable):

C. Geographic description of work performed under this contract (i.e., local, nationwide, worldwide, other Commands):

Section 3: Respondent Identification

A. Respondent’s name:

B. Respondent’s title:

C. Respondent’s phone/fax number/e-mail address:

D. Length of time (number of years/months) respondent worked on subject contract and description of responsibility/position/role:

E. Other suggested points of contact:

Section 4: Performance Information

In the table below, indicate your rating for the contractor’s performance by placing an “X” in the appropriate block to the right of each question. Provide supporting information for each response in the space provided. Attach additional pages if more space is needed. The performance rating scale is defined as follows:

Code Performance Rating

E Exceptional – Performance meets contractual requirements and exceeds many requirements to the Government’s benefit. The contractual performance being assesed was accomplished with few minor problems for which corrective actions taken by the contractor were highly effective.

V Very Good – Peformance meets contractual requirements and exceeds some requirements to the Government’s benefit. The contractual performance being assesed was accomplished with some minor problems for which corrective actions taken by the contractor were effective.

S Satisfactory – Performance meets contractual requirements. The contractual performance being assesed contains some minor problems for which corrective actions taken by the contractor appear or were satisfactory.

M Marginal – Performance does not meet some contractual requirements. The contractual performance being assessed reflects a serious problem for which the contractor has not yet identified corrective actions or the contractor’s proposed actions appear only marginally effective or were not fully implemented.

U Unisatisfactory – Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance being assessed contains serious problem(s) for which the contractor’s corrective actions appear or were ineffective.

N/A Not Applicable – Unable to provide a rating. Contract did not include performance for this aspect, performance was not observed, or information was not available. Do not know.

1. Demonstrated the ability to hire, maintain, and replace, if necessary, qualified personnel during the contract period.

SUPPORTING INFORMATION:

Describe position name and qualifications required, if any.

2. Provided sufficient qualified personnel to meet contract requirements?

3. Did the contractor resolve human resource problems effectively and/or timely?

4. How would you rate the contractor's overall performance on this contract?

5. Was the contractor ever issued a letter of concern, cure notice, or show cause notice under the referenced contract? If yes, explain.

EXPLANATION:

6. Would you award another contract to this contractor? Please explain.

EXPLANATION:

Additional remarks:

[click and pick the date]

Respondent’s Signature Date

Thank you for your prompt response and assistance!

Please return this completed questionnaire to:

E-Mail to: william.farr@us.af.mil and cecile.bodison@us.af.mil

FA4417-17-T-0013

Attachment 2