FA3030-09-T-0021 Air Conditioning Pneumatic Controls.doc

Section SF 1449 - CONTINUATION SHEET

FACILITY OPERATIONS SUPPORT SERVICES

FFP

Base Air Conditioning Pneumatic Controls/Electric Temperature Control Systems Evaluation, Calibration, and Repair IAW the Statement of Work for 1 Oct 09-30 Sep 10.

FOB: Destination

NSN: S216-FA-COP-SSVC

PURCHASE REQUEST NUMBER: F1Z3129065A001

SIGNAL CODE: A

NET AMT

FFP

Base Air Conditioning Pneumatic Controls/Electric Temperature Control Systems Evaluation, Calibration, and Repair IAW the Statement of Work for 1 Oct 10-30 Sep 11.

FOB: Destination

NSN: S216-FA-COP-SSVC

PURCHASE REQUEST NUMBER: F1Z3129065A001

SIGNAL CODE: A

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

30-SEP-2010

JOSHUA ALLEN

460 EAST KEARNEY BLVD

GOODFELLOW AFB TX 76908

325-654-3435

FOB: Destination F1Z312

30-SEP-2011

FOB: Destination F1Z312

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil

(End of clause)

CLAUSES INCORPORATED BY REFERENCE

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JUN 2009) (DEVIATION)

(a) Comptroller General Examination of Record. The Contractor agrees to comply with the provisions of this paragraph (a) if the contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to the right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(b)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (DEC 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note).

(ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) Reserved.

(iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793).

(vii) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (DEC 2004) (E.O. 13201).

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (Not applicable until September 8, 2009.)

(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 15 days of the end of the performance period.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 15 days provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 30 months.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (APR 2009)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/services/contractingopportunities/sizestandardstopics/.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the rerepresentation required by paragraph (b) of this clause by validating or updating all its representations in the Online Representations and Certifications Application and its data in the Central Contractor Registration, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code 238220.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 1989)

In compliance with the Service Contract Act of 1965, as amended, and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

THIS STATEMENT IS FOR INFORMATION ONLY: IT IS NOT A WAGE DETERMINATION

Employee Class

Monetary Wage-Fringe Benefits

23410-Heating, Ventilation, And Air Conditioning Mechanic, WG-8, Step 3 $18.75

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.232-19 AVAILABILITY OF FUNDS FOR THE NEXT FISCAL YEAR (APR 1984)

Funds are not presently available for performance under this contract beyond 30 Sep 2010. The Government's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise for performance under this contract beyond 30 Sep 2010, until funds are made available to the Contracting Officer for performance and until the Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

United States law will apply to resolve any claim of breach of this contract.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Department of Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

When submitting a request for payment, the Contractor shall--

(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and

(b) Separately identify a payment amount for each contract line item included in the payment request.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JAN 2009) (DEVIATION)

(a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5) (Apr 2009) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract:

(End of clause)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (MAY 2002) ALTERNATE III (MAY 2002)

(a) Definitions. As used in this clause --

(1) "Components" means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

(2) "Department of Defense" (DoD) means the Army, Navy, Air Force, Marine Corps, and defense agencies.

(3) "Foreign flag vessel" means any vessel that is not a U.S.-flag vessel.

(4) "Ocean transportation" means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

(5) "Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

(6) "Supplies" means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea.

(i) An item is clearly identifiable for eventual use by the DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

(ii) "Supplies" includes (but is not limited to) public works; buildings and facilities; ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials; and components of the foregoing.

(7) "U.S.-flag vessel" means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if--

(i) This contract is a construction contract; or

(ii) The supplies being transported are--

(A) Noncommercial items; or

(B) Commercial items that--

(1) The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it contracts for f.o.b. destination shipment);

(2) Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or

(3) Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(c) The Contractor and its subcontractors may request that the Contracting Officer authorize shipment in foreign-flag vessels, or designate available U.S.-flag vessels, if the Contractor or a subcontractor believes that --

(1) U.S.-flag vessels are not available for timely shipment;

(2) The freight charges are inordinately excessive or unreasonable; or

(3) Freight charges are higher than charges to private persons for transportation of like goods.

(d) The Contractor must submit any request for use of other than U.S.-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, but the Contracting Officer's failure to grant approvals to meet the shipper's sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date;

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose.

(e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of Transportation, 400 Seventh Street SW., Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of the steamship company.

(f) The Contractor shall insert the substance of this clause, including this paragraph (f), in subcontracts that are for a type of supplies described in paragraph (b)(2) of this clause.

(End of clause)

5352.201-9101 OMBUDSMAN

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, Chief, Business Operations Branch, AETC/A7KB, 2035 1st Street West, Ste 1, Randolph AFB TX 78150-4304, phone (210) 652-7905, facsimile (210) 652-8348. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

CLAUSES INCORPORATED BY FULL TEXT

5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (MAY 1996)

(a) The contractor shall obtain base identification and vehicle passes for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a Goodfellow AFB Form 31 (GAFB Form 31) to the contracting officer for employees and subcontractor employees needing access to the base. A letter, on company letterhead, must be furnished specifying the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the GAFB Form 31 and the employee will then report to Visitor Center/Vehicle Registrar, Bldg 3005, for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license/government issued identification document, social security card, current vehicle registration, valid vehicle insurance certificate, and the completed GAFB Form 31 to obtain a vehicle and/or base identification document.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-209, the Air Force Resource Protection Program, and AFI 31-501, Personnel Security Program Management, as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Prior to submitting an invoice for final payment, the prime contractor shall obtain a clearance certification from the issuing office which states all base identification passes have been turned in, accounted for, or transferred to a follow-on contract. This certification shall be submitted to the contracting officer prior to submission of the final invoice for payment.

(g) Failure to comply with these requirements may result in withholding of final payment.

ADMINISTRATIVE AUTHORITY

(a) Following award, this contract will be administered by the 17th Contracting Squadron. The address, telephone number and fax number of the Contracting Officer are as follows:

17 CONS/LGCA

Attn: 1Lt Brian E. Williams

210 Scherz Blvd

Goodfellow AFB, TX. 76908-4705

Phone: (325) 654-5805

Fax: (325) 654-5149

E-mail: brian.williams@goodfellow.af.mil

(b) The Contracting Officer (CO) is the only person authorized to approve changes or modify any of the requirements under this contract and notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely with the CO. In the event the contractor effects any such change at the direction of any person other than the CO, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover increase in costs incurred as a result thereof.

(c) Contractual problems, of any nature, which might occur during the life of the contract must be handled in conformance with very specific public laws and regulations (e.g., Federal Acquisition Regulation), and must be referred to the CO for resolution. Only the CO is authorized to formally resolve such problems. Therefore, the contractor is hereby directed to bring all such contractual problems to the immediate attention of the CO.

(d) Any request for contract changes/modifications shall be submitted to the CO.

(e) The contractor and the government may agree to perform a no-cost field change. Field changes are made when the change appears to be mutually beneficial to all parties and would not require changing the negotiated line items. An example of a field changes is: rerouting planned location of sidewalk to avoid a tree (when quantities are not changed). All field changes must be approved by the CO prior to execution.

(f) All correspondence concerning this contract, such as requests for information, explanation of terms, and contract interpretations, shall be submitted to the CO.

NORMAL WORK HOURS

The contractor shall schedule all work to commence between the hours of 07:30 AM and 4:30 PM, Monday through Friday, except on the Federal Holidays and days designated as “Family Days” by Air Education and Training Command listed below. Permission to work outside these normal business hours may be granted by the Contracting Officer. Requests to work outside of the normal work hours must be submitted in writing to the Contracting Officer at least 3 working days in advance of the date requested.

Federal Holiday

New Year’s Day

1 January

Martin Luther King’s Birthday 3rd Monday in January

Presidents Day

3rd Monday in February

Memorial Day

Last Monday in May

Independence Day

4 July

Labor Day

1st Monday in September

Columbus Day

2nd Monday in October

Veterans Day

11 November

Thanksgiving Day

4th Thursday in November

Christmas Day

25 December

AETC Family Days

28 NOV 08

02 JAN 09

04 JAN 10

26 DEC 08

06 JUL 09

02 Jul 10

27 NOV 09

26 Nov 10

28 DEC 09

27 Dec 10

Any Holiday falling on a Saturday will be observed the preceding Friday. Any Holiday falling on a Sunday will be observed the following Monday.

UTILITIES

Not withstanding the provisions of contract clause FAR 52.236-14, Availability and Use of Utility Services, all reasonable required amounts of water, gas, electricity, etc., essential to contract performance shall be made available, at no cost to the contractor, from existing systems, outlets, and supplies. All temporary connections, outlets, and distribution lines as may be required will be installed by the contractor at the contractor’s own expense.

SMOKING IN AETC FACILITIES

Contractors are advised that the Commander has placed restrictions on the smoking of tobacco products in AETC facilities. AFI 40-102, Tobacco Use in the Air Force, and its AETC supplement 1, outline the procedures used by the commander to control smoking in our facilities. Contractor employees and visitors are subject to the same restrictions as government personnel. Smoking is permitted only in designated smoking areas. Additional information, to include locations of designated smoking areas, will be provided to the contractor at the pre-performance conference.

WIDE AREA WORK FLOW

WIDE AREA WORK FLOW DODAAC AND EMAIL DISTRIBUTION TABLE

Questions concerning payment should be directed to the Defense Finance Accounting Services (DFAS) Limestone at (800) 337-0371 or (800) 390-5620. Please have your order number and invoice number ready when calling about payment status.

The accounts payable mailing address can be located in Block 18a of your order. You can easily access payment information using the DFAS web site at https://myinvoice.csd.disa.mil//index.html.

Your purchase order/contract number or invoice will be required to inquire status of your payment. Go to DFAS, MyInvoice, on the web at: https://myinvoice.csd.disa.mil//index.html

Payments are to be submitted electronically via Internet through the Wide Area Work Flow (WAWF) system. For information on WAWF go to https://wawf.eb.mil .

NOTE: USE OF WAWF IS MANDATORY. USE OF WAWF WILL SPEED UP YOUR PAYMENT PROCESSING TIME AND ALLOW YOU TO MONITOR YOUR PAYMENT STATUS ONLINE. THERE ARE NO CHARGES OR FEES TO USE WAWF. FOR MORE INFORMATION CONTACT US AT 325-654-3800.

CONTRACTOR IS REQUIRED TO SUBMIT A “2 In 1” SERVICE INVOICE.

FAILURE TO COMPLY WITH THIS REQUIREMENT WILL RESULT IN DISAPPROVAL OF YOUR INVOICE WITHOUT FURTHER REVIEW.

The following codes will be required to route your invoices and additional emails correctly through WAWF.

CAGE CODE:

EMAIL POINT OF CONTACT LISTING: (Please send additional emails to all listed contacts):

LIST OF ATTACHMENTS

LIST OF ATTACHMENTS

ATTACHMENT

DESCRIPTION

PAGES

DATE

Attachment 1

Statement of Work

28 Jul 09

Attachment 2

Wage Determination

22 Jul 09

2005-2717 Rev 11

Attachment 3

Past Performance Questionnaire

28 Jul 09

STATEMENT OF WORK

STATEMENT OF WORK

28 JUL 09

BASE WIDE AIR CONDITIONING PNEUMATIC/ELECTRIC TEMPERATURE CONTROL SYSTEMS

ELECTRICAL MECHANICAL CONTROL SYSTEMS (EMCS)

The intent of this contract is to provide efficient base-wide air conditioning temperature control systems and provide hands-on field training for base maintenance personnel.

SCOPE OF WORK:

1. Discrepancies with the base-wide Air Conditioning Pneumatic /Electric Temperature Control Systems and the Electrical Mechanical Control Systems (EMCS) will be identified by base HVAC personnel and repaired by contractor personnel. During repair, hands-on training will be provided by the contractor to the base HVAC personnel on the systems and the repairs.

2. Provide assistance in integrating existing electric, electronic, and pneumatic HVAC control systems into base wide EMCS.

3. Evaluation of base-wide DDC (Direct Digital Control), pneumatic, & hybrid temperature control systems for further temperature control efficiency as identified by base maintenance personnel.

4. Develop control sequences and monitor installation of these changes performed by base personnel.

5. Calibration of base wide DDC (Direct Digital Control), pneumatic, & hybrid temperature control systems as identified by base maintenance personnel.

6. Labor to replace defective control components.

7. All services shall be provided by Automated Logic Corporation Certified Technicians.

INCLUDED IN THE SCOPE OF WORK:

1. 12 Monthly trips to Goodfellow A.F.B. for the purpose of performing evaluation, calibration, and repair of building Air Conditioning Pneumatic/Electric Control Systems and Electrical Mechanical Control Systems (EMCS).

2. Each monthly trip will include 24 hours (3 days) of control technician labor.

3. These monthly trips will be scheduled 5 working days in advance and are flexible, to meet base maintenance and controls contractor work schedules.

4. The contractor will indentify defective components to base HVAC personnel. The HVAC personnel will order any necessary components and provide them to the contractor for installation. The contractor will not provide and install any components as indicated below.

NOT INCLUDED IN THE SCOPE OF WORK:

1. The contractor will not provide any air conditioning pneumatic and electric control devises.

2. The contractor will not provide any control components (i.e. tubing, wiring, fittings, hangars, supports, etc.).

END OF DOCUMENT

WAGE DETERMINATION

REGISTER OF WAGE DETERMINATIONS UNDER THE SERVICE CONTRACT ACT

By direction of the Secretary of Labor

Shirley F. Ebbesen Director Division of Wage Determinations

U.S. DEPARTMENT OF LABOR

EMPLOYMENT STANDARDS ADMINISTRATION

WAGE AND HOUR DIVISION

WASHINGTON, D.C. 20210

Wage Determination No.:

2005-2517 Revision No.:

Date of Last Revision:

07/22/2009

States: New Mexico, Oklahoma, Texas

Area: New Mexico Counties of Curry, Lea, Quay, Roosevelt, Union Oklahoma Counties of Beaver, Cimarron, Texas Texas Counties of Andrews, Armstrong, Bailey, Borden, Brewster, Briscoe, Brown, Callahan, Carson, Castro, Childress, Cochran, Coke, Coleman, Collingsworth, Comanche, Concho, Cottle, Crane, Crockett, Crosby, Dallam, Dawson, Deaf Smith, Dickens, Donley, Eastland, Ector, Fisher, Floyd, Foard, Gaines, Garza, Glasscock, Gray, Hale, Hall, Hansford, Hardeman, Hartley, Haskell, Hemphill, Hockley, Howard, Hutchinson, Irion, Jeff Davis, Jones, Kent, Kimble, King, Knox, Lamb, Lipscomb, Loving, Lubbock, Lynn, Martin, McCulloch, Menard, Midland, Mitchell, Moore, Motley, Nolan, Ochiltree, Oldham, Parmer, Pecos, Potter, Presidio, Randall, Reagan, Reeves, Roberts, Runnels, Schleicher, Scurry, Shackelford, Sherman, Stephens, Sterling, Stonewall, Sutton, Swisher, Taylor, Terrell, Terry, Throckmorton, Tom Green, Upton, Ward, Wheeler, Winkler, Yoakum, Young

**Fringe Benefits Required Follow the Occupational Listing**

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I

01012 - Accounting Clerk II

01013 - Accounting Clerk III

01020 - Administrative Assistant

01040 - Court Reporter

01051 - Data Entry Operator I

01052 - Data Entry Operator II

01060 - Dispatcher, Motor Vehicle

01070 - Document Preparation Clerk

01090 - Duplicating Machine Operator

01111 - General Clerk I

01112 - General Clerk II

01113 - General Clerk III

01120 - Housing Referral Assistant

01141 - Messenger Courier

01191 - Order Clerk I

01192 - Order Clerk II

01261 - Personnel Assistant (Employment) I

01262 - Personnel Assistant (Employment) II

01263 - Personnel Assistant (Employment) III

01270 - Production Control Clerk

01280 - Receptionist

01290 - Rental Clerk

01300 - Scheduler, Maintenance

01311 - Secretary I

01312 - Secretary II

01313 - Secretary III

01320 - Service Order Dispatcher

01410 - Supply Technician

01420 - Survey Worker

01531 - Travel Clerk I

01532 - Travel Clerk II

01533 - Travel Clerk III

01611 - Word Processor I

01612 - Word Processor II

01613 - Word Processor III

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass

05010 - Automotive Electrician

05040 - Automotive Glass Installer

05070 - Automotive Worker

05110 - Mobile Equipment Servicer

05130 - Motor Equipment Metal Mechanic

05160 - Motor Equipment Metal Worker

05190 - Motor Vehicle Mechanic

05220 - Motor Vehicle Mechanic Helper

05250 - Motor Vehicle Upholstery Worker

05280 - Motor Vehicle Wrecker

05310 - Painter, Automotive

05340 - Radiator Repair Specialist

05370 - Tire Repairer

05400 - Transmission Repair Specialist

07000 - Food Preparation And Service Occupations

07010 - Baker

07041 - Cook I

07042 - Cook II

07070 - Dishwasher

07130 - Food Service Worker

07210 - Meat Cutter

07260 - Waiter/Waitress

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter

09040 - Furniture Handler

09080 - Furniture Refinisher

09090 - Furniture Refinisher Helper

09110 - Furniture Repairer, Minor

09130 - Upholsterer

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles

11060 - Elevator Operator

11090 - Gardener

11122 - Housekeeping Aide

11150 - Janitor

11210 - Laborer, Grounds Maintenance

11240 - Maid or Houseman

11260 - Pruner

11270 - Tractor Operator

11330 - Trail Maintenance Worker

11360 - Window Cleaner

12000 - Health Occupations

12010 - Ambulance Driver

12011 - Breath Alcohol Technician

12012 - Certified Occupational Therapist Assistant

12015 - Certified Physical Therapist Assistant

12020 - Dental Assistant

12025 - Dental Hygienist

12030 - EKG Technician

12035 - Electroneurodiagnostic Technologist

12040 - Emergency Medical Technician

12071 - Licensed Practical Nurse I

12072 - Licensed Practical Nurse II

12073 - Licensed Practical Nurse III

12100 - Medical Assistant

12130 - Medical Laboratory Technician

12160 - Medical Record Clerk

12190 - Medical Record Technician

12195 - Medical Transcriptionist

12210 - Nuclear Medicine Technologist

12221 - Nursing Assistant I

12222 - Nursing Assistant II

12223 - Nursing Assistant III

12224 - Nursing Assistant IV

12235 - Optical Dispenser

12236 - Optical Technician

12250 - Pharmacy Technician

12280 - Phlebotomist

12305 - Radiologic Technologist

12311 - Registered Nurse I

12312 - Registered Nurse II

12313 - Registered Nurse II, Specialist

12314 - Registered Nurse III

12315 - Registered Nurse III, Anesthetist

12316 - Registered Nurse IV

12317 - Scheduler (Drug and Alcohol Testing)

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I

13012 - Exhibits Specialist II

13013 - Exhibits Specialist III

13041 - Illustrator I

13042 - Illustrator II

13043 - Illustrator III

13047 - Librarian

13050 - Library Aide/Clerk

13054 - Library Information Technology Systems Administrator

13058 - Library Technician

13061 - Media Specialist I

13062 - Media Specialist II

13063 - Media Specialist III

13071 - Photographer I

13072 - Photographer II

13073 - Photographer III

13074 - Photographer IV

13075 - Photographer V

13110 - Video Teleconference Technician

14000 - Information Technology Occupations

14041 - Computer Operator I

14042 - Computer Operator II

14043 - Computer Operator III

14044 - Computer Operator IV

14045 - Computer Operator V

14150 - Peripheral Equipment Operator

14160 - Personal Computer Support Technician

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated)

15020 - Aircrew Training Devices Instructor (Rated)

15030 - Air Crew Training Devices Instructor (Pilot)

15050 - Computer Based Training Specialist / Instructor

15060 - Educational Technologist

15070 - Flight Instructor (Pilot)

15080 - Graphic Artist

15090 - Technical Instructor

15095 - Technical Instructor/Course Developer

15110 - Test Proctor

15120 - Tutor

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler

16030 - Counter Attendant

16040 - Dry Cleaner

16070 - Finisher, Flatwork, Machine

16090 - Presser, Hand

16110 - Presser, Machine, Drycleaning

16130 - Presser, Machine, Shirts

16160 - Presser, Machine, Wearing Apparel, Laundry

16190 - Sewing Machine Operator

16220 - Tailor

16250 - Washer, Machine

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room)

19040 - Tool And Die Maker

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator

21030 - Material Coordinator

21040 - Material Expediter

21050 - Material Handling Laborer

21071 - Order Filler

21080 - Production Line Worker (Food Processing)

21110 - Shipping Packer

21130 - Shipping/Receiving Clerk

21140 - Store Worker I

21150 - Stock Clerk

21210 - Tools And Parts Attendant

21410 - Warehouse Specialist

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder

23021 - Aircraft Mechanic I

23022 - Aircraft Mechanic II

23023 - Aircraft Mechanic III

23040 - Aircraft Mechanic Helper

23050 - Aircraft, Painter

23060 - Aircraft Servicer

23080 - Aircraft Worker

23110 - Appliance Mechanic

23120 - Bicycle Repairer

23125 - Cable Splicer

23130 - Carpenter, Maintenance

23140 - Carpet Layer

23160 - Electrician, Maintenance

23181 - Electronics Technician Maintenance I

23182 - Electronics Technician Maintenance II

23183 - Electronics Technician Maintenance III

23260 - Fabric Worker

23290 - Fire Alarm System Mechanic

23310 - Fire Extinguisher Repairer

23311 - Fuel Distribution System Mechanic

23312 - Fuel Distribution System Operator

23370 - General Maintenance Worker

23380 - Ground Support Equipment Mechanic

23381 - Ground Support Equipment Servicer

23382 - Ground Support Equipment Worker

23391 - Gunsmith I

23392 - Gunsmith II

23393 - Gunsmith III

23410 - Heating, Ventilation And Air-Conditioning Mechanic

23411 - Heating, Ventilation And Air Contditioning Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic

23440 - Heavy Equipment Operator

23460 - Instrument Mechanic

23465 - Laboratory/Shelter Mechanic

23470 - Laborer

23510 - Locksmith

23530 - Machinery Maintenance Mechanic

23550 - Machinist, Maintenance

23580 - Maintenance Trades Helper

23591 - Metrology Technician I

23592 - Metrology Technician II

23593 - Metrology Technician III

23640 - Millwright

23710 - Office Appliance Repairer

23760 - Painter, Maintenance

23790 - Pipefitter, Maintenance

23810 - Plumber, Maintenance

23820 - Pneudraulic Systems Mechanic

23850 - Rigger

23870 - Scale Mechanic

23890 - Sheet-Metal Worker, Maintenance

23910 - Small Engine Mechanic

23931 - Telecommunications Mechanic I

23932 - Telecommunications Mechanic II

23950 - Telephone Lineman

23960 - Welder, Combination, Maintenance

23965 - Well Driller

23970 - Woodcraft Worker

23980 - Woodworker

24000 - Personal Needs Occupations

24570 - Child Care Attendant

24580 - Child Care Center Clerk

24610 - Chore Aide

24620 - Family Readiness And Support Services Coordinator

24630 - Homemaker

25000 - Plant And System Operations Occupations

25010 - Boiler Tender

25040 - Sewage Plant Operator

25070 - Stationary Engineer

25190 - Ventilation Equipment Tender

25210 - Water Treatment Plant Operator

27000 - Protective Service Occupations

27004 - Alarm Monitor

27007 - Baggage Inspector

27008 - Corrections Officer

27010 - Court Security Officer

27030 - Detection Dog Handler

27040 - Detention Officer

27070 - Firefighter

27101 - Guard I

27102 - Guard II

27131 - Police Officer I

27132 - Police Officer II

28000 - Recreation Occupations

28041 - Carnival Equipment Operator

28042 - Carnival Equipment Repairer

28043 - Carnival Equpment Worker

28210 - Gate Attendant/Gate Tender

28310 - Lifeguard

28350 - Park Attendant (Aide)

28510 - Recreation Aide/Health Facility Attendant

28515 - Recreation Specialist

28630 - Sports Official

28690 - Swimming Pool Operator

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer

29020 - Hatch Tender

29030 - Line Handler

29041 - Stevedore I

29042 - Stevedore II

30000 - Technical Occupations

30021 - Archeological Technician I

30022 - Archeological Technician II

30023 - Archeological Technician III

30030 - Cartographic Technician

30040 - Civil Engineering Technician

30061 - Drafter/CAD Operator I

30062 - Drafter/CAD Operator II

30063 - Drafter/CAD Operator III

30064 - Drafter/CAD Operator IV

30081 - Engineering Technician I

30082 - Engineering Technician II

30083 - Engineering Technician III

30084 - Engineering Technician IV

30085 - Engineering Technician V

30086 - Engineering Technician VI

30090 - Environmental Technician

30210 - Laboratory Technician

30240 - Mathematical Technician

30361 - Paralegal/Legal Assistant I

30362 - Paralegal/Legal Assistant II

30363 - Paralegal/Legal Assistant III

30364 - Paralegal/Legal Assistant IV

30390 - Photo-Optics Technician

30461 - Technical Writer I

30462 - Technical Writer II

30463 - Technical Writer III

30491 - Unexploded Ordnance (UXO) Technician I

30492 - Unexploded Ordnance (UXO) Technician II

30493 - Unexploded Ordnance (UXO) Technician III

30494 - Unexploded (UXO) Safety Escort

30495 - Unexploded (UXO) Sweep Personnel

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide

31030 - Bus Driver

31043 - Driver Courier

31260 - Parking and Lot Attendant

31290 - Shuttle Bus Driver

31310 - Taxi Driver

31361 - Truckdriver, Light

31362 - Truckdriver, Medium

31363 - Truckdriver, Heavy

31364 - Truckdriver, Tractor-Trailer

99000 - Miscellaneous Occupations

99030 - Cashier

99050 - Desk Clerk

99095 - Embalmer

99251 - Laboratory Animal Caretaker I

99252 - Laboratory Animal Caretaker II

99310 - Mortician

99410 - Pest Controller

99510 - Photofinishing Worker

99710 - Recycling Laborer

99711 - Recycling Specialist

99730 - Refuse Collector

99810 - Sales Clerk

99820 - School Crossing Guard

99830 - Survey Party Chief

99831 - Surveying Aide

99832 - Surveying Technician

99840 - Vending Machine Attendant

99841 - Vending Machine Repairer

99842 - Vending Machine Repairer Helper

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.35 per hour or $134.00 per week or $580.66 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving…