salient_characteristics_10_May_2018.pdf

10 May 2018

1. The Government requests that delivery of JLG H340AJ Articulating boom lift or equal be made to

Eglin AFB Duke Field.

796 CES/CEORV

Building 3031 Clay Street (Duke Field)

Eglin AFB, FL. 32542

POC will be provided at time of contract award.

2. The vendor shall call Government points of contact to schedule delivery during the hours of

(0645 to 1630) not later than one business day in advance of anticipated delivery. At which time, the Government will provide the exact location for this particular delivery. Upon delivery, a certified sales representative/trainer will be present on site to provide hands on training and set up an operational instruction to Government personnel. This is a hard requirement, no exceptions.

3. The Government is requesting the purchase of one (1) name brand or equal JLG H340AJ articulating boom lift conforming to the technical criteria listed in this document. The lift shall be a current production model and must be delivered in a fully operational ready-to-work condition.

The lift shall conform to the latest revisions of the following standards:

1. ANSI A92.5-2006

2. JIC H-1-73

3. OSHA Chapter XVII, Part 1910, Subpart F, Section 1910.67

4. OSHA Chapter XVII, Part 1910, Subpart F, Section 1926.556

5. ANSI/AWS D1.1-1990

6. ANSI/ASME B15.1-1984

These are the minimal requirements that the Government is willing to accept in order to successfully complete these projected projects within the time and budget that has been allotted.

1. Shall be a self-propelled articulating boom lift with no outriggers or tracks. This is a hard requirement, no exceptions.

2. Articulating boom lift shall be a four wheel drive unit with drive power being supplied by four brushless AC motors.

3. Each drive wheel shall be equipped with an electric released spring applied disc type brake and shall be applied automatically anytime the drive function is deactivated.

4. The lift shall consist of pneumatic all-terrain non-marking tires and a minimum of 10 inches of ground clearance to be able to handle soft sand along with various other rough terrain.

5. The lift shall have a minimum grade ability of 45% to allow usage on various different grades of terrain. A tilt sensor shall be mounted in the turntable and shall illuminate a light in the platform when the machine is tilted 5 degrees or more. In addition, if the platform is out of the stowed position, encountering a slope of 5 degrees or more shall sound an audible alarm and cause all functions to go into “creep” mode. Machine must also be drivable at full elevation. This is a hard requirement, no exceptions.

6. The overall machine dimensions shall be no longer than 19 feet and shall not exceed 6 foot 4 inches from the outsides of the tires to accommodate the use of a standard 20 foot heavy equipment The overall “stowed position” height (the position in which the lift is all the way down) shall not exceed 6 foot 7 inches to allow clearance under standard height freight doorways.

7. The overall machine weight shall be 10,000 pounds or less.

8. Lift shall have a maximum platform height of 35 feet but no less than 30 feet and a maximum working height of 40 feet but no less than 38 feet. The horizontal outreach and

“up and over height” must be 24 feet or less. This is a hard requirement, no exceptions.

9. The working platform on the lift must have a minimum weight capacity of 500lbs. to accommodate 2 working personnel and have a minimum of 30 inch by 60 inch basket dimension to allow access into tight areas. The platform floor shall be constructed of steel expanded metal mesh and shall not exceed 3/8 inch openings.

Platform kick plate height around the perimeter shall be a minimum of 6 inches to keep tools and materials within the platform.

10. The platform shall consist of a hardwired foot switch which must be depressed to enable operation of controls from the platform. The platform shall be made of steel.

11. Lift must also have a minimum 4 foot jib capacity and shall pivot to allow for versatility. This is a hard requirement, no exceptions.

12. The platform controls shall possess highly visible graphics with easy to understand pictographs.

13. Steering shall be accomplished with a thumb switch positioned on top of the drive control lever..

14. Boom lift and turntable swing must use a common multifunction joystick control and must be fully proportional and operable while driving. Boom telescope, platform level and override functions shall be toggle switch operated and shall be varied in speed with a function speed control dial. Five degree tilt light, horn button, and red-illuminated mushroom-type emergency cut off switch shall be standard equipment.

15. Lift shall consist of a ground control panel that is selected by a key switch to allow operation from the ground level in the event of a mishap or loss of control in the platform.

This is a hard requirement, no exceptions.

16. The lift shall consist of a 10 horsepower Hybrid diesel engine or greater. The diesel engine shall have the capability of being turned off for operation on electric power only, or of turning on automatically when the batteries state of charge requires it. This is a hard requirement, no exceptions.