Attachment_1_Pricing_worksheet.doc

Attachment 1: PRICING SCHEDULE

FA2823-16-Q-0039

Ea

***Shipping costs MUST be included within the unit price.*** ***Quotes must be good for a minimum of 60 days from close of solicitation*** Vendors may, at their discretion, provide additional time. THIS QUOTE EXPIRES ON:

Business Size:

Small Large Other:_

NOTE: The individual signing must be a signatory official for this Entity; signature constitutes agreement to all terms/conditions contained within this solicitation.

Filter Performance 3- Stage Filter System Performance Data (minimum requirement). NESHAP Method 319 and Paint Test documents must accompany solicitation reply. Test Paint must be Mil Spec MIL-PRF 23377(Deft 02-Y-040A)

1. NESHAP Method 319 Efficiency

a. 95 percent - 0.59-0.73 micron size KCL

b. 84.3 percent - 0.37-0.47 micron size Oleic Acid

2. Paint Fractional Efficiency

a. 98.1 percent - 0.20-0.30 micron size MIL-PRF 23377 (Deft 02-Y-040A)

3. Paint Arrestance MIL-PRF 23377 (Deft 02-Y-040A)

a. 1st stage CPA

i. 2741 g. (6.04 lbs) @ .642 fpd wg

b. 2nd stage ME/PT panel

i. 1958 g. (4.32 lbs) @ 1.075 fpd wg

c. 3rd stage XFP-6000 6 pkt bag

i. 2003 g. (4.42 lbs) @ 1.148 fpd wg

AJ Dralle “Or Equal” 24” X 24” X 1”, ME/PT Panel Filter (612 each) Specifications:

The filter will be constructed of two different layers of tackified polyester media, sealed together so that the tackified layers of each media touch in the center. Method of joining the media is with an RF “heat sealer”. In addition to the perimeter seal, the product must have additional sealing in the face in order to keep the two layers connected. Although the perimeter seals may be sewn, the center seals on the filter face must be heat-sealed.

The air entry layer is constructed of a multi-layered, multi-density polyester with a heavy, nonmigrating tackifer on the air leaving side. The air leaving media is heavy needled polyester, densified to ¼” thick, tackified on the air entry side with a weight of 0.42 ounces per square foot. The air leaving side will be inkjet printed for identification and proper installation.

Panels will have a galvanized nine-gauge wire frame with a minimum of one cross wire will be inserted into the panel so the wire is touching the tackified sides of both media. Initial pressure drop of 0-06 water gauge (w.g) at 150 feet per minute.

AJ Dralle “Or Equal” 24” X 24” X 12”, XFP-6000 6 Pocket Bag Filter (612 each) Specifications:

The 6 pocket bag filter is constructed of a composite pre-filter, melt blown and spun bound polyester fibers. The pockets are sewn together on the perimeter and two seams, forming threeair channels in each bag pocket. A “J” channel is inserted into each finished pocket, and individually placed into a header. The pockets are stapled and notched together and to the header to insure filter integrity. The galvanized header has a ¼” foam gasket on the air leaving side to prevent any paint bypass around the filter assembly.

AJ Dralle “Or Equal” 77”x125”x2.5”, CPA Blanket (42 each) Specifications:

The CPA paint overspray media is made from multi-layered, multi-density polyester, High efficiency and holding capacity. 1.2oz per sq foot. Open structure to collect paint overspray without restricting airflow.

52.211-6 -- Brand Name or Equal

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.