VEHICLES_WEAPONSS_RACK_STATEMENT_OF_WORK.docx

DOCX document 22 KB Posted

Attached to
Vehicle Weapons Rack Federal contract opportunity
Solicitation number
FA2823-15-Q-3009
Issued by
Department of the Air Force Materiel Command Test Center

About this file

Statement of Work - Vehicle Weapons Rack

View the file

Other files for this federal contract opportunity

Other files attached to Vehicle Weapons Rack, newest first.
File Type Posted
Questions_and_Answers.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

VEHICLES WEAPONS RACKS STATEMENT OF WORK

96 SFS

Eglin AFB, FL 7 May 2015

1. GENERAL REQUIREMENTS:

The work consists of providing all labor, materials and equipment as required to install forty- nine (QTY 49) Dual -Mounted Weapons Racks provided by the contractor in patrol vehicles located at the 96th Security Forces Squadron (96th SFS) on Eglin AFB.

2. SCOPE OF WORK:

The 96th SFS requests forty-nine (QTY 49) Dual – Mounted Weapons Racks to be installed in existing patrol vehicles to include sedans, SUVs, and trucks. The Dual-Mounted Weapons Racks must hold M4A1 Rifle. These vehicle year models range from 2001-2014.

BRAND NAME OR EQUAL. Santa Cruz SC-915-D-55-A or EQUAL.

Salient Characteristics

· Vehicle Dual – Mounted Weapons for QTY forty- nine (49) different vehicle models of security vehicles utilized by the 96 SFS.

· Electric Solenoid - with manual key override – 12 volt power source

· Interior of lock - Cast aluminum insert surrounded by steel C Plates with Rubber Coating

· 2 x SC-5 gun locks

· Specific key: handcuff key - 2 with each lock

· Installation Instructions included

3. LOCATION:

302 W D Ave., Eglin AFB, FL 32542. (Bldg. 272)

Install must be completed on Eglin AFB, as these vehicles belong to first responders and are subject emergency recalling procedures at any time. The 96 SFS cannot support having multiple vehicles being non-operational for an extended period of time outside the installation. In the event, vehicles are unavailable, and then an alternate location will be agreed upon by the contractor and customer.

4. OBJECTIVES:

1. Dual – Mounted Weapons Racks must secure M4A1 Carbine Rifle with specific handcuff keys to open (or release) and secure.

2. Dual – Mounted Weapons Racks must prohibit (by mechanical restriction) the ability to chamber a round while the weapons are secured in the Racks.

3. Each Dual – Mounted Weapons Racks must not interfere with spare tire access or other electrical equipment located in the rear of the vehicle.

4. The Dual – Mounted Weapons Racks must prevent the ability to remove the magazine from the Weapons while it is secured in the Racks.

5. Dual – Mounted Weapons Racks must be capable of being locked into place by a key system.

6. Dual – Mounted Weapons Racks provider must provide approximately 49 Dual – Mounted Weapons Racks within a 90 day timeline with FOB destination.

7. The Dual – Mounted Weapons Racks must be secured in such a way to not tip over with weapons stored in the Racks and for one Racks to be opened at a time.

8. The Dual – Mounted Weapons Racks must be capable of being expanded with little effort, but to also have a safety mechanism that once opened are capable of staying where stopped keeping them from rolling freely back to the closed position.

9. Each Dual – Mounted Weapons Racks must accommodate all of the following weapon systems:

i. M4A1 Carbine Rifle - Dual rifles into place

ii. Rifles include M68 sight optic, Pac 15 IR, gun light, and full loaded magazine assembled

iii. Adjustable Butt Stock

iv. Weapons weight is 16.41 pounds

v. Weapons length is 40.87 inches

Installation:

1. Installation for Chevy Impala and Ford Interceptor Sedan.

1. Vehicle Year Models 2007 - 2015

i. Each Dual – Mounted Weapons Racks must be mounted on the trunk lid, the upper trunk deck, or inside the trunk of the sedan. The Dual – Mounted Weapons Racks may also be mounted inside the roof or of the vehicle. Each Dual – Mounted Weapons Racks must accommodate Dual – Mounted Weapons Racks for each sedan.

2. Installation for Chevy Tahoe, Ford Expedition, and Ford Escape Sports Utility Vehicle (SUV).

1. Vehicle Year Models 2007- 2014

i. Each Dual – Mounted Weapons Racks must be mounted in the cargo area or the interior roofing of the vehicle. Each Weapons Racks must accommodate Dual – Mounted Weapons Racks for each SUV.

3. Installation for Chevy Silverado 3500HD, Ford F-350, Ford F-250, and Chevy 1500.

1. Vehicle Year Models 2001- 2009

i. Each Dual – Mounted Weapons Racks must be mounted on the interior roofing or the floor board of the vehicle. Each Weapons Racks must accommodate Dual – Mounted Weapons Racks for each truck.

5. PARTS REQUIRED:

Technical Requirements for the criteria listed for QTY 49 dual-mounted gun Racks and the installation of the gun Racks for various vehicles operating at the 96 SFS. Each vehicle will hold a dual gun Racks mount with manual handcuff locks that will either be located in the trunk or cargo area in a vehicle. Furthermore, the interior roofing of a vehicle or the rear floorboard of a truck can be utilized as well. These vehicles range from a sedan, SUV, or truck and each mount will require a different location and size to install the gun Racks inside the vehicle. The configuration must be able to switch any Dual – Mounted Weapons muzzle up. The gun Racks must have the capability to secure Dual (2 qty. each) M4A1 into place. (See below for equipment)

Equipment:

Dual Mounted Gun Racks:
Quantity
Ford F250/ F350
Ford

Escape

Ford Interceptor
Ford

Expedition Chevy 3500/1500

Chevy Tahoe
Chevy

Impala

Location Installation
Floor/Roof
Cargo Area/Roof
Trunk/Roof
Cargo Area/Roof
Floor/Roof
Cargo Area/Roof
Trunk

/Roof

2 x gun locks
6
3
3
4
8
6
19
2 x butt plate
6
3
3
4
8
6
19
2 x 18” long flat bars
6
3
3
4
8
6
19
2 x bottom hinges
6
3
3
4
8
6
19

File details come from the government source that posted it. Updated .