Exhibits A-E.pdf

PDF 606 KB Posted

Attached to
Socket Head Cap Screws, Socket Head Jacking Cap Screws, and Special Socket Head Cap Screws. Federal contract opportunity
Solicitation number
SPMYM323Q6021
Issued by
Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI ·

This document contains five Contract Data Requirements Lists (CDRLs) for the procurement of socket head cap screws, socket head jacking cap screws, and special socket head cap screws. The CDRLs require the submission of Certificates of Compliance and Chemical and Mechanical Certification Data/Reports with the deliverables to Defense Logistics Agency Land and Maritime under Solicitation SPMYM323Q6021. The CDRLs specify the data item descriptions, distribution statements, frequencies, and other submission requirements for the quality certifications accompanying the fasteners procured through four separate contract line items.

View the file

Other files for this federal contract opportunity

Other files attached to Socket Head Cap Screws, Socket Head Jacking Cap Screws, and Special Socket Head Cap Screws., newest first.
File Type Posted
Security Agreement For NNPI_DD FORM 2345.pdf PDF
SPMYM323Q6021 RFQ.pdf PDF
23-Q-6021 Full Text Provisions and Clauses rev.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST

245.2C-0978-23 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SOCKET HEAD CAP SCREW

E. CONTRACT/PR NO.

31864001

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

A002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 3617 245.2C

H. DATE

07/05/2023

I. APPROVED BY 245.2

7 / 6 / 2 0 2 3

X J a s o n L a f l a m m e

S i g n e d b y : L A F L A M M E . J A S O N . R . 1 2 5 5 7 7 6 5 5 6

J. DATE

07/06/23

245.2C-0978-23 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

B

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SOCKET HEAD CAP SCREW

E. CONTRACT/PR NO.

31864002

F. CONTRACTOR

1. DATA ITEM NO.

B001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

B002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 3617 245.2C

H. DATE

07/05/2023

I. APPROVED BY 245.2

7 / 6 / 2 0 2 3

X J a s o n L a f l a m m e

S i g n e d b y : L A F L A M M E . J A S O N . R . 1 2 5 5 7 7 6 5 5 6

J. DATE

07/06/23

245.2C-0980-23 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

C

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SOCKET HEAD CAP SCREW,

E. CONTRACT/PR NO.

31864021

F. CONTRACTOR

1. DATA ITEM NO.

C001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

C002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industr

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 3617 245.2C

H. DATE

07/05/2023

I. APPROVED BY 245.2

X

J. DATE

07/07/23

A. CONTRACT LINE ITEM NO. B. EXHIBIT

D

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SOCKET HEAD JACKING CAP SCREW

E. CONTRACT/PR NO.

31864022

F. CONTRACTOR

1. DATA ITEM NO.

D001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

D002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industr

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 3617 245.2C

H. DATE

07/05/2023

I. APPROVED BY 245.2

X

J. DATE

A. CONTRACT LINE ITEM NO. B. EXHIBIT

E

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SPECIAL SOCKET HEAD CAP SCREW

E. CONTRACT/PR NO.

31864023

F. CONTRACTOR

1. DATA ITEM NO.

E001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

E002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industr

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 3617 245.2C

H. DATE

07/05/2023

I. APPROVED BY 245.2

X

J. DATE

Exhibit A
Exhibit B
Exhibit C
Exhibit D
Exhibit E

File details come from the government source that posted it. Updated .