Exhibit B.pdf
PDF 94 KB Posted
- Attached to
- FLAT SOCKET HEAD SELF-LOCKING CAP SCREWS Federal contract opportunity
- Solicitation number
- SPMYM326Q6005
About this file
This Contract Data Requirements List (CDRL) details requirements for Flat Socket Head Self-Locking Cap Screws under contract number 52754232-SPMYM326Q6005, line items 0005-6. The document outlines two specific data items: B001 (Certificate of Quality Compliance) and B002 (Chemical & Mechanical Certification), both to be submitted one time with material delivery. Key requirements include providing quantitative test results for chemical and mechanical testing, with specific instructions that new untested fasteners are required for each test involving wedge tensile and yield strength testing. The certification must demonstrate testing of the correct number of specimens and comply with marking and certification requirements for Controlled Industrial Material, with the requiring office designated as Code 245.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 26Q6005 RFQ Required.docx | DOCX document | |
| Exhibit A.pdf | ||
| Security Agreement For NNPI_DD FORM 2345.pdf | ||
| Clauses - Full Text Provisions and Clauses 250423.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
C. CATEGORY
TDP X TM OTHER
F. CONTRACTOR
B. EXHIBIT
B
E. CONTRACT/PR NO.
52754232 - SPMYM326Q6005
245.2B-1885-25
A. CONTRACT LINE ITEM NO. 0005-6
D. SYSTEM/ITEM
FLAT SOCKET HEAD SLF-LKG
CAP SCREWS
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
B001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item{s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
B002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item{s).
3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1 0 /1 4 /2 0 2 5
10/14/25 CHRIS BROWN Ext: 2961 09/30/2025
X 245.2B
EDWARD WALSH
S lg n e d by: W AL SH .EDWARD .M .141104 8 0 3 5
File details come from the government source that posted it. Updated .